Simon Vitzthum, M.Sc.

Wissenschaftlicher Mitarbeiter

Telefon:   +49 89 289-13999
E-Mail:    simon.vitzthum@utg.de
Raum:     0407

 

Linkedin

Forschungs- und Arbeitsschwerpunkte

Veröffentlichungen

2022

  • Norz, R.; Vitzthum, S.; Volk, W.;: Failure behaviour of various pre-formed steel sheets with respect to the mechanical grain boundary properties. International Journal of Material Forming 15 (4), 2022 mehr…
  • Vitzthum, S.; Rebelo Kornmeier, J.; Hofmann, M.; Gruber, M.; Maawad, E.; Batista, A.; Hartmann, C.; Volk, W.: In-situ analysis of the thermoelastic effect and its relation to the onset of yielding of low carbon steel. Materials & Design 219, 2022, 110753 mehr…
  • Vitzthum, S.; Gruber, M.; Rebelo-Kornmeier, J.; Hofmann, M.; Volk, W.: Experimental Investigation of Factors Influencing the Determination of the Onset of Yielding by Temperature Measurement. Key Engineering Materials 926, 2022, 1021--1029 mehr…
  • Vitzthum, S.; Kornmeier, J. R.; Hofmann, M.; Gruber, M.; Norz, R.; Maawad, E.; Mendiguren, J.; Volk, W.: In-situ analysis of the elastic-plastic characteristics of high strength dual-phase steel. Materials Science and Engineering: A, 2022, 144097 mehr…

2020

  • Tsutamori, H.; Amaishi, T.; Chorman, R.; Eder, M.; Vitzthum, S.; Volk, W.: Evaluation of Prediction Accuracy for Anisotropic Yield Functions Using Cruciform Hole Expansion Test. Journal of Manufacturing and Materials Processing 4 (2), 2020, 43 mehr…

2019

  • Vitzthum, S.; Hartmann, C.; Eder, M.; Volk, W.: Temperature-based determination of the onset of yielding using a new clip-on device for tensile tests. 18th International Conference on Sheet Metal, SHEMET, 2019, 490-497 mehr…
  • Vitzthum, S.; Hiller, M.; Volk, W.: Experimental investigation of the scalability of roller‐clinching processes with regard to joint strength and failure mode. Material Science & Engineering Technology 50 (8), 2019, 1015-1026 mehr…
  • Vitzthum, S.; Sturm, P.; Hiller, M.; Volk, W.: Numerical investigation on the robustness of the roller clinching process. AIP Conference Proceedings, 2019 mehr…
  • Volk, W.; Eder, M.; Norz, R.; Vitzthum, S.: Determination and Validation of Material Parameters for Sheet Metal Simulation. 12th Forming Technology Forum, 2019 mehr…
  • Werner, M. K.; Maier, D.; Vitzthum, S.; Intra, C.; Volk, W.: Validation of numerical simulations for the reduced freeform bending process using a test bench. Production at the leading edge of technology - Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019, Springer Vieweg, 2019WGP Jahreskongress, 149-157 mehr…

2018

  • Hiller, M.; Vitzthum, S.; Hacker, M.; Benkert; T.; Volk, W.: Numerical Analysis of the Scalability of Roller Clinching Processes. Key Engineering Materials 767, 2018, 377-385 mehr…
  • Vitzthum, S.; Eder, M.; Hartmann, C; Volk, W.: Investigation on strain dependent elastic behavior for accurate springback analysis. Journal of Physics: Conference Series Volume 1063, 2018 mehr…
  • Vitzthum, S.; Hiller, M.; Dinh, D. T.; Volk, W.: Tool setup to investigate scalability of roller clinching processes. Procedia Manufacturing Volume 15, 2018, 1338-1345 mehr…
  • Volk, W.; Eder, M.; Norz, R.; Vitzthum, S.: Advanced Strategies for Material Characterization and Validation in Sheet Metal Forming. Asia-Pacific Symposium on Engineering Plasticity and its Applications (AEPA2018), 2018 mehr…

2017

  • Hiller, M.; Benkert, T.; Vitzthum, S.; Volk, W.: Influence of tool elasticity on process forces and joint properties during clinching with rotational tool movement. Journal of Physics: Conference Series 896, 2017, 012116 mehr…
  • Vitzthum, S. J.; Hartmann, C.; Weiss, H. A.; Baumgartner, G.; Hofmann, M.; Volk, W.: Determination of crystallographic young’s modulus for sheet metals by in situ neutron diffraction. Journal of Physics: Conference Series 896, 2017, 012123 mehr…
  • Volk, W.; Eder, M.; Feistle, M.; Gaber, C.; Jocham, D.; Pätzold, I.; Vitzthum, S.; Weinschenk, A.: Advances in Characterization of Sheet Metal Materials. 36th IDDRG Conference Materials Modelling and Testing for Sheet Metal Forming, 2017 mehr…

2016

  • Jocham, D.; Vitzthum, S.; Takahashi, S.; Weinschenk, A.; Volk, W.: Yield locus determination of DX56 on a testing apparatus with link mechanism using thermoelectrical effect and equivalent plastic work. 9th Forming Technology Forum 2016, 2016, 81-86 mehr…

Auszeichnungen

ZwickRoell Science Award 2018
Verleihung am ZwickRoell Academia Day in Shanghai, 14. Juni 2019