Skip to content
Menu
Technical University of Munich
Technical University of Munich

Publications

Please find below the publications of the "Lehrstuhl für Medizintechnik" directed by Professor Erich Wintermantel.

Journal Articles

2019

  • Fischer, Theresa; Ahrens, Markus; Eblenkamp, Markus: Photocatalytically active TiO2 – silicone rubber. AIP Conference Proceedings 2139, 2019, 180001 more…
  • Fischer, Theresa; Wilhelm, Matthias; Fechter, Florian; Eblenkamp, Markus; Rudloff, Johannes; Lang, Marieluise; Hochrein, Thomas; Bastian, Martin: Agglomerate-Free Compounding. Kunststoffe international (8), 2019, 41-43 more…
  • Fischer, Theresa; Wilhelm, Matthias; Fechter, Florian; Eblenkamp, Markus; Rudloff, Johannes; Lang, Marieluise; Hochrein, Thomas; Bastian, Martin: Agglomeratfrei compoundieren. Kunststoffe (7), 2019, 57-59 more…
  • Gattinger, J., Köppl, R., Zeppenfeld, M.: Compounding and Direct Compounding of Crimped Fiber Reinforced Thermoplastic Elastomers. AIP Conference Proceedings, 2019 more…
  • Werner, Valerie; Artmann, Lucas; Eblenkamp, Markus: Schutzschild für Elektronik und Körper: Barrierewirkung polymerer Beschichtungen zur Kapselung von Smart Biomedical Devices. Kunststoffe (5), 2019, 45-48 more…
  • Werner, Valerie; Artmann, Lucas; Eblenkamp, Markus: Protective Coat for Electronics and Body. Kunststoffe international (5), 2019, 16-19 more…
  • Zeppenfeld, M., Müller, B., Heyl, S.: Influence of Insert Component Position and Geometry on Shrinkage in Thermoplastic Insert Molding. AIP Conference Proceedings 2139, 2019, 030005 more…
  • Zeppenfeld, M., Trescher, M., Robeck, A., Gattinger, J.: Comparison of cold and hot runner system concerning part accuracy in thermoplastic injection molding. AIP Conference Proceedings, 2019 more…
  • Zeppenfeld, Matthias; Hirn, Rupert; Wardenberg, Maximilian; Eblenkamp, Markus: Wireless Life Cycle Monitoring in the Injection Molded Part. Kunststoffe international 109 (4), 2019, 11-16 more…

2018

  • Bauer, F. X.; Heinrich, V.; Grill, F. D.; Wölfle, F.; Hedderich, D. M.; Rau, A.; Wolff, K.-D.; M., Ritschl L.; Loeffelbein, D. J.: Establishment of a finite element model of a neonate's skull to evaluate the stress pattern distribution resulting during nasoalveolar molding therapy of cleft lip and palate patients. Journal of Cranio-Maxillofacial Surgery 46 (4), 2018, 660-667 more…
  • Damiati, Samar; Peacock, Martin; Leonhardt, Stefan; Damiati, Laila; Baghdadi, Mohammed A.; Becker, Holger; Kodzius, Rimantas; Schuster, Bernhard: Embedded disposable functionalized electrochemical biosensor with a 3D-printed flow cell for detection of hepatic oval cells (HOCs). Genes 9 (2), 2018, 418-421 more…
  • Düregger, Katharina; Gäble, Alexander; Eblenkamp, Markus: Development and evaluation of a spray applicator for platelet-rich plasma. Colloids and Surfaces B: Biointerfaces 171, 2018, 214-223 more…
  • Düregger, Katharina; Trik, Sina; Leonhardt, Stefan; Eblenkamp, Markus: Additive-manufactured microporous polymer membranes for biomedical in vitro applications. Journal of Biomaterials Applications 33 (1), 2018, 116-126 more…
  • Fischer, Theresa; Lang, Marieluise: Schlussbericht IGF-Vorhaben Nr. 19079 N Entwicklung selbst-desinfizierender und beständiger Kunststoffoberflächen auf Basis von photokatalytisch aktivem Titandioxid für Hygieneanwendungen. Fördergemeinschaft für das Süddeutsche Kunststoff-Zentrum e.V. - FSKZ, Würzburg, 2018 more…
  • Gattinger, J., Kirsch, M., Kirchebner, B.: Flexible composite strands through extrusion of crimped fiber reinforced thermoplastic elastomers. Materials Today Communications 15, 2018, 43-47 more…
  • Grill, Florian D; Ritschl, Lucas M; Bauer, Franz X; Rau, Andrea; Gau, Dominik; Roth, Maximilian; Eblenkamp, Markus; Wolff, Klaus-Dietrich; Loeffelbein, Denys J: A semi-automated virtual workflow solution for the design and production of intraoral molding plates using additive manufacturing: the first clinical results of a pilot-study. Scientific Reports 8 (1), 2018 more…
  • Grill, Florian D; Ritschl, Lucas M; Dikel, Hannes; Rau, Andrea; Roth, Maximilian; Eblenkamp, Markus; Wolff, Klaus-Dietrich; Loeffelbein, Denys J; Bauer, Franz X: Facilitating CAD/CAM nasoalveolar molding therapy with a novel click-in system for nasal stents ensuring a quick and user-friendly chairside nasal stent exchange. Scientific Reports 8 (1), 2018 more…
  • Haerst, M.; Leonhardt, S.; Strauß, L.; Eblenkamp, M.: Heißer Drucker. Kunststoffe (4), 2018, 54-57 more…
  • Haerst, M.; Leonhardt, S.; Strauß, L.; Eblenkamp, M.: Hot Printer. Kunststoffe international (4), 2018, 28-31 more…
  • Ritschl, Lucas M; Heinrich, Veronika; Grill, Florian D; Roth, Maximilian; Hedderich, Dennis M; Rau, Andrea; Wolff, Klaus-Dietrich; Bauer, Franz X; Loeffelbein, Denys J: Stress Distribution Patterns within Viscero-and Neurocranium during Nasoalveolar Molding: a Finite Element Analysis. Plastic and Reconstructive Surgery-Global Open 6 (7), 2018 more…
  • Schmid, R.; Tarau, I.-S.; Rossi, A.; Leonhardt, S.; Schwarz, T.; Schuerlein, S.; Lotz, C.; Hansmann, J.: In Vivo-Like Culture Conditions in a Bioreactor Facilitate Improved Tissue Quality in Corneal Storage. Biotechnology Journal 13 (1), 2018, 1700344 more…
  • Stöckl, C; . Hampe, R.; Stawarczyk, B.; Haerst, M.; Roos, M.: Macro- and microtopographical examination and quantification of CAD-CAM composite resin 2- and 3-body wear. The Journal of Prosthetic Dentistry 120 (4), 2018, 537-545 more…
  • Stöckl, Carolin; Hampe, Rüdiger; Stawarczyk, Bogna; Haerst, Miriam; Roos, Malgorzata: Macro- and microtopographical examination and quantification of CAD-CAM composite resin 2- and 3-body wear. The Journal of Prosthetic Dentistry 120 (4), 2018, 537-545 more…
  • Werner, V.; Eblenkamp, M.: Biokompatible Integration von IoT-Elektronik in Kunststoffbauteile. Extractables & Leachables, VDI (White Paper), 2018 more…

2017

  • Bauer, F. X., Guell, F. D., Roth, M., Ritschl, L. M., Rau, A., Gau, D., Gruber, M., Eblenkamp, M. Hilmer, B, Wolff, K.-D., Loeffelbein, D. J.: A Prospective Longitudinal Study of Postnatal Dentoalveolar and Palatal Growth: The Anatomical Basis for CAD/CAM-Assisted Production of Cleft-Lip-Palate Feeding Plates. Clinical Anatomy, 2017, 1-9 more…
  • Bauer, F. X., Schönberger, M., Gattinger, J., Eblenkamp, M., Wintermantel, E., Rau, A., Güll, F. D., Wolff, K.-D., Loeffelbein, D. J.: RapidNAM: generative manufacturing approach of nasoalveolar molding devices for presurgical cleft lip and palate treatment. Biomedical Engineering / Biomedizinische Technik, 2017 more…
  • Bodden, L., Nina Lümkemann, N., Köhler, V., Eichberger, M., Stawarczyk, B.: Impact of the heating/quenching process on the mechanical, optical and thermodynamic properties of polyetheretherketone (PEEK) films. Dental Materials, 2017, 9 more…
  • Boudot, C., Kühn, M., Kühn-Kauffeldt, M., Schein, J.: Vacuum arc plasma deposition of thin titanium dioxide films on silicone elastomer as a functional coating for medical applications. Materials Science and Engineering C 74, 2017, 508-514 more…
  • Dornseifer, U.; Kleeberger, C.; Kargl, L.; Schönberger, M.; Rohde, D.; Ninkovic, M.; Schilling, A.;: Perfusion Controlled Mobilization after Lower Extremity Free Flaps—Pushing the Limits of Time and Intensity. Journal of Reconstructive Microsurgery 33 (3), 2017, 179-185 more…
  • Düregger, K., Frenzel, S., Eblenkamp, M.: Autologous fibrin glue: automated production and adhesive quality. Current Directions in Biomedical Engineering 3 (2), 2017, 397-400 more…
  • Eblenkamp, M., Düregger, K., Leonhardt, S.: Biomimicry - One Layer at a Time: High-Function Integrated Plastics Systems for the Cell-Based Laboratory Medicine. Kunststoffe international 6-7/2017, 2017, 44-46 more…
  • Eblenkamp, M., Düregger, K., Leonhardt, S.: Schichtweise zu lebensnaher Biomimikry: Hochfunktionsintegrierte Kunststoffsysteme für die zellbasierte Labormedizin. Kunststoffe 6/2017, 2017, 44-46 more…
  • Schmid, R., Tarau, I.-S., Rossi, A., Leonhardt, S., Schwarz, T., Schuerlein, S., Lotz, C., Hansmann, J.: In Vivo-Like Culture Conditions in a Bioreactor Facilitate Improved Tissue Quality in Corneal Storage. Biotechnology Journal, 2017, 1-7 more…

2016

  • Boudot, C., Boccoz, A., Düregger, K., Kuhnla, A.: A novel blood incubation system for the in-vitro assessment of interactions between platelets and biomaterial surfaces under dynamic flow conditions: The Hemocoater. Journal of Biomedical Materials Research - Part A, 2016 more…
  • Dhand, C., Ong, S.T., Dwivedi, N., Diaz, S.M., Venugopal, J.R., Navaneethan, B., Fazil, M.H.U.T., Liu, S., Seitz, V., Wintermantel, E., Beuerman, R.W., Ramakrishna, S., Verma, N.K., Lakshminarayanan, R.: Bio-inspired in situ crosslinking and mineralization of electrospun collagen scaffolds for bone tissue engineering. Biomaterials 104, 2016, 323-338 more…
  • Felice, B., Seitz, V., Bach, M., Rapp, C., Wintermantel, E.: Antimicrobial polymers: Antibacterialefficacy of silicone rubber–titanium dioxide composites. Journal of Composite Materials 0 (0), 2016, 1–10 more…
  • Haerst, M., Ecke, N. C., Wintermantel, W.: Innovative Extrusion Process for Liquid Silicone Rubber: Calculation versus Experiment. SPE ANTEC 2016 - Conference Proceedings, 2016 more…
  • Koenig, F., Lee, J. S., Akra, B., Hollweck, T., Wintermantel, E., Hagl, C., Thierfelder, N.: Is Transcatheter Aortic Valve Implantation of Living Tissue-Engineered Valves Feasible? An In Vitro Evaluation Utilizing a Decellularized and Reseeded Biohybrid Valve. ARTIFICIAL ORGANS 40 (8), 2016, 727-737 more…
  • Krampe, E. Haerst, M., Wintermantel, E.: Entwicklung einer patientenoptimierten Bandscheibentotalendoprothese: Von einer Idee zum Implantatkonzept. Kunststoffe in der Medizintechnik - Friedrichshafen, 2016 more…
  • Leonhardt, S, Klare, M, Scheer, M, Eblenkamp, M, Huszár, M, Rienäcker, F, Wintermantel, E: How compatible are photopolymers? Kunststoffe International 106 (4), 2016, 10-14 more…
  • Loeffelbein, D. J., Gull, F. D., Bauer, F., Wintermantel, E.: Presurgical Nasoalveolar Molding for Cleft Lip and Palate: The Application of Digitally Designed Molds. PLASTIC AND RECONSTRUCTIVE SURGERY 137 (6), 2016, 903E-904E more…
  • Loeffelbein, D. J., Güll, F. D., Bauer, F., Wintermantel, E.: Comment on: Presurgical nasoalveolar molding for cleft lip and palate: the application of digitally designed molds. Plastic and Reconstructive Surgery, 2016 more…
  • Rapp, C., Klose, M., Buske, C., Wintermantel, E.: Resistant and non-toxic surfaces created inline. Kunststoffe International 106 (4), 2016, 25-27 more…
  • Ritschl, L. M., Rau, A., Gull, F. D., diBora, B., Wolff, K. D., Schoenberger, M., Bauer, F. X., Wintermantel, E., Loeffelbein, D. J.: Pitfalls and solutions in virtual design of nasoalveolar molding plates by using CAD/CAM technology--A preliminary clinical study. J Craniomaxillofac Surg 44 (4), 2016, 453-9 more…
  • Seitz, V., Arzt, K., Mahnel, S., Rapp, C., Schwaminger, S., Hoffstetter, M., Wintermantel, E.: Improvement of adhesion strength of self-adhesive silicone rubber on thermoplastic substrates - Comparison of an atmospheric pressure plasma jet (APPJ) and a Pyrosil® flame. International Journal of Adhesion and Adhesives 66, 2016, 65-72 more…

2015

  • Boudot, C., Recht, S., Eblenkamp, M., Haerst, M., Wintermantel, E.: Protein Adsorption and Adhesion of Blood Platelets on Silicone Rubber under Static and Dynamic Flow Conditions. IFMBE Proceedings (45), 2015, 541-544 more…
  • Eblenkamp, M., Haag, L., Pfeifer, S., Wintermantel, E.: Software-Based System for Automatic 3D Dendritic Spine Evaluation for Research on Alzheimer‘s Disease. IFMBE Proceedings 45, 2015, 138-141 more…
  • Haerst, M., Seitz, V., Ahrens, M., Boudot, C., Wintermantel, E.: Silicone Fiber Electrospinning for Medical Applications. IFMBE Proceedings (45), 2015, 537-540 more…
  • Haerst, M., Wintermantel, E.: Process Development for the Extrusion of Liquid Silicone Rubber - More Freedom for Silicone Extrusion. Kunststoffe international 2015 (11), 2015, 38-41 more…
  • Haerst, M., Wolf, R., Schönberger, M., Wintermantel, E., Engelsing, K., Heidemeyer, P., Bastian, M.: Ageing processes in laser sintered and injection moulded PA12 following hygienic reprocessing. Rapid Prototyping Journal 21 (3), 2015, 279-286 more…
  • Leblanc, S., Barret, M., Brehm, A., Rouquette, A., Camus, M., Wintermantel, E., Prat, F.: A new device to expedite endoscopic submucosal dissection procedures: a randomized animal study of efficacy and safety (with videos). Endoscopy international open 3 (5), 2015, E443-9 more…
  • Loeffelbein, D. J., Ritschl, L. M., Rau, A., Wolff, K. D., Barbarino, M., Pfeifer, S., Schönberger, M., Wintermantel, E.: Analysis of computer-aided techniques for virtual planning in nasoalveolar moulding. British Journal of Oral and Maxillofacial Surgery, 2015 more…

2014

  • Schönberger, M., Hierl, F., Haerst, M., Wintermantel, E.: Suitability of Screw Plasticization for Autosterile Injection Molding. Advances in Polymer Technology 33 (2), 2014 more…
  • Schönberger, M., Wintermantel, E., Hoffstetter, M.: Autosterile injection molding (AIM) - A new manufacturing approach for medical single use products. TPE Magazine (4), 2014, 246-251 more…
  • Seitz, V., Wintermantel, E., Schönberger, M., Hoffstetter, M.: Does Size Matter? Two-Component Adhesion - Investigation and Comparison of Testing Methods. Kunststoffe International 104 (11), 2014, 37-41 more…
  • Seitz, V., Wintermantel, E., Schönberger, M., Hoffstetter, M.: Muss es immer groß sein? 2K-Verbundhaftung - Betrachtung und Vergleich von Prüfmethoden. Kunststoffe 104 (11), 2014, 72-77 more…
  • Ziegelmeier, S., Christou, P., Wöllecke, F., Tuck, C., Goodridge, R., Hague, R., Krampe, E., Wintermantel, E.: An experimental study into the effects of bulk and flow behavior of Laser Sintering polymer powders on resulting part properties. Journal of Materials Processing Technology 215, 2014, 239-250 more…

2013

  • Dittmann, R., Wintermantel, E., Graule, T.: Sintering of nano-sized titania particles and the effect of chlorine impurities. Journal of the European Ceramic Society 33 (15-16), 2013, 3257-3264 more…
  • Grödl, F.: Drahtlos versorgt. MED engineering (1-2/2013), 2013, 52-53 more…
  • Grödl, F.: Drahtlose Energieübertragung für aktive medizinische Implantate. move 10, 2013, 14-15 more…
  • Herrmann, F. E. M., Lehner, A., Hollweck, T., Haas, U., Fano, C., Fehrenbach, D., Kozlik-Feldmann, R., Wintermantel, E., Eissner, G., Hagl, C., Akra, B.: In vitro biological and mechanical evaluation of various scaffold materials for myocardial tissue engineering. Journal of Biomedical Materials Research - Part A, 2013 more…
  • Huppmann, T., Hanselmann, N., Haller, N., Leonhardt, S., Wintermantel, E.: Antimikrobielle Wirkung von Bauteilen aus Titandioxid-Kunststoff-Kompositen. Tagungsband 9. Thementage Grenz- und Oberflächentechnik, 2013, 194-199 more…
  • Huppmann, T., Yatsenko, S., Leonhardt, S., Radovanovic, I., Bastian, M., Wintermantel, E.: Antimicrobial polymers - the antibacterial effect of photoactivated nano titanium dioxyde polymer composite. Proceedings of the Polymer Processing Society 29th Annual Meeting, 2013, 09- 180 more…
  • Kruppa, S., Hämmerl, S., Schiffers,R., Krampe,E., Wintermantel,E: Analysis of the filling cycle and automated determinatiopn of the change-over point with sensor systems on the machine and comparison with conventional switchover methods in injection molding. Proccedings of the Polymer Processing Society 29th Annual Meeting, 2013 more…
  • Ravichandran, R., Seitz, V., Reddy Venugopal, J., Sridhar, R., Sundarrajan, S., Mukherjee, S., Wintermantel, E., Ramakrishna, S.: Mimicking Native Extracellular Matrix with Phytic Acid-Crosslinked Protein Nanofibers for Cardiac Tissue Engineering. Macromolecular Bioscience 13 (3), 2013, 366-375 more…
  • Ravichandran, R., Venugopal, J. R., Mueller, M., Sundarrajan, S., Mukherjee, S., Pliska, D., Wintermantel, E., Ramakrishna, S.: Buckled structures and 5-azacytidine enhance cardiogenic differentiation of adipose-derived stem cells. Nanomedicine 8 (12), 2013, 1985-1997 more…
  • Ravichandran, R., Venugopal, J.R., Mueller, M., Sundarrajan, S., Mukherjee, S., Pliska, D., Wintermantel, E., Ramakrishna, S.: Buckled structures and 5-azacytidine enhance cardiogenic differentiation of adipose-derived stem cells. Nanomedicine 8 (12), 2013, 1985-1997 more…
  • Thierfelder, N., Koenig, F., Bombien, R., Fano, C., Reichart, B., Wintermantel, E., Schmitz, C., Akra, B.: In Vitro Comparison of Novel Polyurethane Aortic Valves and Homografts After Seeding and Conditioning. ASAIO Journal 59 (3), 2013, 309-316 10.1097/MAT.0b013e318289b95e more…
  • Wolff, T., Lasso, A., Eblenkamp, M., Wintermantel, E., Fichtinger, G.: C-arm angle measurement with accelerometer for brachytherapy: an accuracy study. International Journal of Computer Assisted Radiology and Surgery, 2013, 1-8 more…

2012

  • Aleksieva, G., Hollweck, T., Thierfelder, N., Haas, U., Koenig, F., Fano, C., Dauner, M., Wintermantel, E., Reichart, B., Schmitz, C., Akra, B.: Use of a special bioreactor for the cultivation of a new flexible polyurethane scaffold for aortic valve tissue engineering. Biomed Eng Online 11, 2012, 92 more…
  • Jumpertz, I., Wintermantel, E., Schaumann, M., Krampe, E.: Einfluss auf das Anwachsverhalten humaner Fibroblasten. Kunststoffe 102 (7), 2012, 31-35 more…
  • Jumpertz, I., Wintermantel, E., Schaumann, M., Krampe, E.: Influence on the Ongrowth Behavior of Tissue Cells. Kunststoffe international 102 (7), 2012, 21-25 more…
  • Kai, D., Prabhakaran, M. P., Stahl, B., Eblenkamp, M., Wintermantel, E., Ramakrishna, S.: Mechanical properties and in vitro behavior of nanofiber-hydrogel composites for tissue engineering applications. Nanotechnology 23 (9), 2012, 095705 more…
  • König, F., Hollweck, T., Pfeifer, S., Reichart, B., Wintermantel, E., Hagl, C., Akra, B.: A Pulsatile Bioreactor for Conditioning of Tissue-Engineered Cardiovascular Constructs under Endoscopic Visualization. Journal of Functional Biomaterials 3 (3), 2012, 480-496 more…
  • Neubert, S., Pliszka, D., Góra, A., Jaworek, A., Wintermantel, E., Ramakrishna, S.: Focused deposition of electrospun polymer fibers. Journal of Applied Polymer Science 125 (1), 2012, 820-827 more…
  • Schönberger, M., Robeck, A., Huppmann, T., Wintermantel, E.: Auto-Sterility of Polymer Melts. Kunststoffe international (12), 2012, 45-47 more…
  • Schönberger, M., Robeck, A., Huppmann, T., Wintermantel, E.: Autosterilität von Polymerschmelzen. Kunststoffe 102 (12), 2012, 75-77 more…
  • Wu, H.B., Haugen, H.J., Wintermantel, E.: Supercritical CO2 in injection molding can produce open porous polyurethane scaffolds – a parameter study. Journal of Cellular Plastics 48 (2), 2012, 141-159 more…
  • de Buhr, W., Pfeifer, S., Slotta-Huspenina, J., Wintermantel, E., Lutter, G., Goetz, W. A.: Impairment of pericardial leaflet structure from balloon-expanded valved stents. Journal of Thoracic and Cardiovascular Surgery 143 (6), 2012, 1417-1421 more…

2011

  • Hoffstetter, M., Lugauer, F., Kundu, S., Wacker, S., Perea-Saveedra, H., Lenarz, T., Hoffstetter, P., Schreyer, A. G., Wintermantel, E.: Middle ear of human and pig: A comparison of structures and mechanics. Biomedizinische Technik 56 (3), 2011, 159-165 more…
  • Hollweck, T., Akra, B., Haussler, S., Uberfuhr, P., Schmitz, C., Pfeifer, S., Eblenkamp, M., Wintermantel, E., Eissner, G.: A Novel Pulsatile Bioreactor for Mechanical Stimulation of Tissue Engineered Cardiac Constructs. Journal of Functional Biomaterials 2 (3), 2011, 107-118 more…
  • Hollweck, T., Hartmann, I., Eblenkamp, M., Wintermantel, E., Reichart, B., Überfuhr, P., Eissner, G.: Cardiac Differentiation of Human Wharton`s Jelly Stem Cells – Experimental Comparison of Protocols. The Open Tissue Engineering and Regenerative Medicine Journal 4, 2011, 95-102 more…
  • Lechelmayr, T., Preuss, T., Jumpertz, I., Novotny, F., Eblenkamp, M., WIntermantel, E.: Nanocomposites as biomaterials. Kunststoffe international 101 (2), 2011, 50-52 more…
  • Loeffelbein, D. J., Schutz, K., Bauer, F., Wolff, K. D., Schuster, T., Opitz, R., Wintermantel, E., Pfeifer, S.: Experimental analysis of tensile force of individualized stents for microvascular anastomoses. Biomed Tech (Berl) 56 (2), 2011, 107-13 more…
  • Neubert, S., Pliszka, D., Thavasi, V., Wintermantel, E., Ramakrishna, S.: Conductive electrospun PANi-PEO/TiO2 fibrous membrane for photo catalysis. Materials Science and Engineering: B 176 (8), 2011, 640-646 more…
  • Schaumann, M., Heidemeyer, P., Jumpertz, I., Hoffstetter, M., Wintermantel, E.: Stress Cracking from Medical Fluids. Kunststoffe international, 2011, 54-57 more…
  • Schaumann, M., Heidemeyer, P., Jumpertz, I., Hoffstetter, M., Wintermantel, E.: Spannungsrissbildung durch medizinische Fluide. Kunststoffe 101 (7), 2011, 66-70 more…

2010

  • Athelogou, M., Eblenkamp, M., Schmidt, G., Novotny, F., Wintermantel, E., Binnig, G.: Single-Cell Detection and Classification in Phase Contrast Images. Information Technology and Applications in Biomedicine (ITAB), 10th IEEE International Conference on, 2010 more…
  • Hoffstetter, M., Schardt, F., Lenarz, T., Wacker, S., Wintermantel, E.: Parameter study on a finite element model of the middle ear. Biomed Tech (Berl) 55 (1), 2010, 19-26 more…
  • Hoffstetter, M., Wintermantel, E.: MESO fiber – a novel approach to reinforce micro parts. Materialwissenschaft und Werkstofftechnik 41 (12), 2010, 1011-1018 more…
  • Hollweck, T., Marschmann, M., Hartmann, I., Akra, B., Meiser, B., Reichart, B., Eblenkamp, M., Wintermantel, E., Eissner, G.: Comparative analysis of adherence, viability, proliferation and morphology of umbilical cord tissue-derived mesenchymal stem cells seeded on different titanium-coated expanded polytetrafluoroethylene scaffolds. Biomedical Materials 5 (6), 2010 more…
  • Schlicht, H., Haugen, H. J., Sabetrasekh, R., Wintermantel, E.: Fibroblastic response and surface characterization of O(2)-plasma-treated thermoplastic polyetherurethane. Biomedical Materials 5 (2), 2010 more…
  • Wu, H., Haugen, H., Wintermantel, E.: The Effects of Mold Design on the Pore Morphology of Polymers Produced with MuCell Technology. Journal of Cellular Plastics 46 (6), 2010, 519-530 more…
  • Xiong, F., Goetz, W., Chong, C., Chua, Y., Pfeifer, S., Wintermantel, E., Yeo, J.: Finite Element Investigation of Stentless Pericardial Aortic Valves: Relevance of Leaflet Geometry. Annals of Biomedical Engineering 38 (5), 2010, 1908 - 1918 more…

2009

  • Dittmann, R., Wintermantel, E., Graule, T.: Effect of chlorine impurities on sintering behaviour of nano-sized titania particles. Journal of the European Ceramic Society 29 (13), 2009 more…
  • Gotzmann, G., Wintermantel, E., Guber, A.: Kunststoffe als Kostenkiller. Kunststoffe 99 (2), 2009, 76-78 more…
  • Hoffstetter, M., Ebert, K., Schaumann, M., Wintermantel, E.: Novel Designs for Middle Ear Implants Produced by Micro Injection Molding. IFMBE Proceedings 25 (11), 2009, 49-51 more…
  • Neubert, S., Eblenkamp., E., Pliszka, D., Sundarrajan, S., Ramakrishna, S., Wintermantel, E.: Precise Deposition of Electrospun Nanofibers and Electrospraying of Nanoparticles as Enabling Techniques for Biomedical Engineering Applications. IFMBE Proceedings 25 (8), 2009, 124-127 more…
  • Pfeifer, S., Loeffelbein, D., Opitz, R., Wolff, K., Wintermantel, E.: Preclinical Analysis of Stents for Microvascular Anastomoses: A Method to Anlayse the Tensile Strength. IFMBE Proceedings 25 (11), 2009, 33-36 more…
  • Radina, C., Krampe, E., Edlauer, M., Winkler, P., Wintermantel, E.: Development of Radiolucent Headholder Pins for Intraoperative CT-Imaging. IFMBE Proceedings 25 (6), 2009, 43-46 more…
  • Wu, H., Krampe, E., Schlicht, H., Wintermantel, E.: Application of a microcellular injection molding process (MuCell®) to produce an implant with porous structure. IFMBE Proceedings 25 (10), 2009, 61-64 more…
  • Wu, H., Wacker, S., Schlicht, H., Wintermantel, E.: Cytological evaluation of a porous implant made from TPU. IFMBE Proceedings 25 (10), 2009, 65-68 more…
  • Xiong, F., Goetz, W., Chua, Y., Zhang, P., Pfeifer, S., Wintermantel, E., Yeo, J.: Effect of Leaflet Geometry on Mechanical Performance of Stentless Pericardial Aortic Valves – A Dynamic Simulation. IFMBE Proceedings 25 (4), 2009, 1657-1660 more…

2008

  • Ammer, D.: Spritzgießen im Miniaturformat. TUM Campus (1), 2008, 32-33 more…
  • Hoffstetter, M., Krampe, E., Wintermantel, E.: Besser hören mit Polymeren. Kunststoffe 98 (4), 2008, 106-108 more…
  • Laar, N.: Using Plastic to Counteract Urinary Urgency. Kunststoffe International 98 (4), 2008, 56-57 more…
  • Laar, N., Grosse, J., Michaelis, I., von Walter, M., Michaeli, W., Wintermantel, E.: Mit Kunststoff gegen Harndrang. Kunststoffe 98 (4), 2008, 102-104 more…
  • Laar, N., Wintermantel, E.: DEGBLADD - Degradable Bladder Implant. Kunststoffe in der Medizintechnik, 2008 more…
  • Sparrow, N.: Technical University of munich develops microinjection moulding machine. European Medical Device Manufacturer 19 (1), 2008, 68 more…
  • Wintermantel, E., Ammer, D., Kosthorst, T.: Mit Echtzeitregelung zur Mikropräzision. Kunststoffe 98 (6), 2008, 70-74 more…
  • Wintermantel, E., Ammer, D., Kosthorst, T.: Using real-time control for microprecision. Kunststoffe International 98 (6), 2008, 37-40 more…

2007

  • Bauer, L., García, P. F., Wintermantel, E., Schlögl, M.: Künstliche Ernährung per Getränkeflasche. Kunststoffe 97 (7), 2007, 99-101 more…
  • Bauer, L., García, P. F., Wintermantel, E., Schlögl, M.: Artificial nutrition from beverage bottles. Kunststoffe International 97 (7), 2007, 69-71 more…
  • Dittmann, R., Vital, A., Clemens, F., Wintermantel, E., Graule, T.: Synthesis and Ceramic Processing of Titania Nanopowders. Ceramic forum international 13, 2007, 39-42 more…
  • Fraga García, P., Bauer, L., Wintermantel, E., Schlögl, M.: Das Zwiebelprinzip. Kunststoffe 97 (5), 2007, 62-64 more…
  • Graule, T., Dittmann, R., Vital, A., Clemens, F., Wintermantel, E.: Keramik aus Nanopulvern: Verfahrenstechnik und Anwendungen, Teil 2. Keramische Zeitschrift 59 (2), 2007, 106-109 more…
  • Haugen, H., Brunner, M., Pellkofer, F., Aigner, J., Will, J., Wintermantel, E.: Effect of different y-irradiation doses on cytotoxicity and material properties of porous polyether-urethane polymer. Journal of Biomedical Material research b: Applied Biomaterials, 2007 more…
  • Michaeli, W., Wintermantel, E., Michaelis, I., Grosse, J., v. Walter, M., Laar, N.: Resorbierbares Implantat mit Wirkstoff. Kunststoffe (07), 2007, 96-98 more…
  • Michaeli, W., Wintermantel, E., Michaelis, I., Grosse, J., v. Walter, M., Laar, N.: Resorbable Implant Containing Medication. Kunststoffe International (07), 2007, 61-62 more…
  • Perea, H., Aigner, J., Heverhagen, JT., Hopfner, U., Wintermantel, E.: Vascular tissue engineering with magnetic nanoparticles: seeing deeper. Journal of Tissue Engineering and Regenerative Medicine, 2007 more…
  • Wintermantel, E., Gotzmann, G.: Ein Eldorado für Neuentwicklungen aus Kunststoff. Kunststoffe 97 (2), 2007, 64-68 more…

2006

  • Graule, T., Dittmann, R., Vital, A., Clemens, F., Wintermantel, E.: Verarbeitung und Sinterverhalten von Titandioxid Nanopulvern für Biomaterialien. cfi-Beihefte Fortschrittsberichte der Deutschen Keramischen Gesellschaft 20, 2006, 147-152 more…
  • Haugen, H., Aigner, J., Brunner, M., Wintermantel, E.: A novel processing method for injection-molded polyether-urethane scaffolds. Part 2: cellular interactions. J Biomed Mater Res b Appl Biomater 77 (1), 2006, 73-78 more…
  • Haugen, H., Will, J., Fuchs, E., Wintermantel, E.: A novel processing method for injection-molded polyether-urethane scaffolds. Part 1: Processing. J Biomed Mater Res b Appl Biomater 77B (1), 2006, 65-72 more…
  • Perea, H., Aigner, J., Hopfner, U., Wintermantel, E.: Direct Magnetic Tubular Cell Seeding: A Novel Approach for Vascular Tissue Engineering. Cells Tissues Organs 183, 2006, 156-165 more…
  • Stöver, M., Renke-Gluszko, M., Schratzenstaller, T., Will, J., Klink, N., Behnisch, B., Kastrati, A., Wessely, R., Hausleiter, J., Schömig, A., Wintermantel, E.: Microstructuring of stainless steel implants by electrochemical etching. Journal of Materials Science: Materials in Medicine, 2006 more…
  • Warmuth, S., Aigner, J., Scharnweber, D., Kosmann, M., Worch, H., Wintermantel, E.: In vitro secretion proinflammatory cytokines by human mononuclear cells after contact with various precoated titanium aloys (Ti6Al4V). Journal of Materials Science: Materials in Medicine submitted, 2006 more…

2005

  • Aigner, J., Eblenkamp, M., Wintermantel, E.: Funktioneller Gewebe- und Organersatz mit postnatalen Stammzellen: Technologische Grundlagen. Der Chirurg 76 (5), 2005, 435-444 more…
  • Deppe, H., Warmuth, S., Heinrich, A.: Laser assisted three dimensional surface modification of titanium implants: preliminary data. Laser in Medical Science 19 (4), 2005, 229-233 more…
  • Haugen, H., Gerhard, L.C., Will, J., Wintermantel, E.: Biostability of injection moulded polyether-urethane scaffolds: A comparison of two novel processing methods and effects of higher gamma-irritation dose. Journal of Biomedical Material research b: Applied Biomaterials 73B (2), 2005, 229-237 more…
  • Hausleiter, J., Kastrati, A., Wessely, R., Dibra, A., Mehilli, J., Schratzenstaller, T., Graf, I., Renke-Gluszko, M., Behnisch, B., Dirschinger, J., Wintermantel, E., Schömig, A.: Prevention of restenosis by a novel drug-eluting stent system with a dose-adjustable, polymer-free, on-site stent coating. European Heart Journal 26 (15), 2005, 1475-1481 more…
  • Jacobs, V.R., Niemeyer, M., Gottschalk, N., Schneider, K.T.M., Kiechle, M., Oostendrop, R.A.J., Peschel, C., Honicka, M., Lehle, K., Birnbaum, D., Meyer, T., Rapp, S., Burkhart, J., Aigner, J., Eblenkamp, M., Wintermantel, E.: The STEMMAT-project as part of health initiative BayernAktiv: adult stem cells from umbilical cord and cord blood as alternative to embryonic stem cell research. Zentralbl Gynakol 127 (6), 2005, 368-372 more…
  • Warmuth, S., Kosmann, M., Aigner, J., Scharnweber, D., Worch, H., Wintermantel, E.: Monozyten und Makrophagen im direkten Kontakt mit TiAl6V4-Implantaten. Zeitschrift für materialprüfung 47, 2005, 107-111 more…
  • Wessely, R., Hausleiter, J., Michaelis, C., Jaschke, B., Vogeser, M., Milz, S., Behnisch, B., Schratzenstaller, T., Renke-Gluszko, M., Stover, M., Wintermantel, E., Kastrati, A., Schomig, A.: Inhibition of neointima formation by a novel drug-eluting stent system that allows for dose-adjustable, multiple and on-site stent coating. Arteriosclerosis, thrombosis and vascular biology 25 (4), 2005, 748-753 more…
  • Will, J., Gilbert, I., Dittmann, R., Haugen, H., Schnell-Witteczek, S., Wintermantel, E.: Manufacturing of structured TiO2-surfaces for cell carrier application. Materials Science Forum 492-493, 2005, 171-176 more…

2004

  • Eblenkamp, M., Aigner, J., Hintermair, J., Potthoff, S., Hopfner, U., Jacobs, V.R., Niemeyer, M., Wintermantel, E.: Umbilical Cord Stromal Cells (UCSC): Zellen mit osteogenem Differenzierungspotenzial. Orthopäde 29, 2004 more…
  • Haugen, H., Ried, V., Will, J., Wintermantel, E.: Water as Foaming Agent for Open Cell Polyurethane Stuctures. Journal of Materials Science: Materials in Medicine 15 (4), 2004, 343-346 more…
  • Haugen, H., Schlicht, H., Brunner, M., Will, J., Aigner, J., Wintermantel, E.: Non-toxic injection-moulded scaffolds. Transactions - 7th World Biomaterials Congress, 2004, 1233 more…
  • Haugen, H., Will, J., Hopfner, U., Aigner, J., Wintermantel, E.: Ceramic TiO2-Foams: Characterisation of a Potential Scaffold. Journal of the European Ceramic Society 24 (4), 2004, 661-668 more…
  • Haugen, H., Will, J., Köhler, A., Hopfner, U., Aigner, J., Wintermantel, E.: Processing and Characterisation of a Potential TiO2 Scaffold. Key Engineering Material 254-256, 2004, 941-944 more…
  • Jacobs, V.R., Niemeyer, M., Höpfner, C., Schneider, K.T.M., Kiechle, M., Oostendrop, R.A.J., Peschel, C., Hönicka, M., Lehle, K., Birnbaum, D., Meyer, T.P.H., Rapp, S., Burkhart, J., Aigner, J., Eblenkamp, M., Wintermantel, E.: Das STEMMAT-Projekt. Zellbiologie 1, 2004, 16-18 more…
  • Naumann, A., Dennis, J., Aigner, J., Coticchia, J., Arnold, J., Berghaus, A., Kastenbauer, E.R., Caplan, A.I.: Tissue Engineering of autologous cartilage grafts in three-dimensional in vitro macroaggregate culture system. Tissue Engineering 11, 2004, 1695-1706 more…
  • Staudenmaier, R., Hoang, N., Kleinsasser, N., Schnurr, C., Frölich, K., Wenzel, M., Aigner, J.: Flap-prefabrication and prelamination with tissue-engineered cartilage. Journal of Reconstructive Microsurgery 20, 2004, 555-564 more…
  • Staudenmaier, R., Miehle, N., Kleinsasser, N., Ziegelaar, B., Wenzel, M., Aigner, J.: Gezüchtetes Knorpelgewebe in einem präfabrizierten, mikrovaskulären Lappen. HNO 52, 2004, 510-517 more…
  • Ulrich, D., Lichtenegger, F., Eblenkamp, M., Repper, D., Pallua, N.: Matrix metalloproteinases, tissue inhibitors of metalloproteinases, aminoterminal propetide of procollagen type III, and hyaluronan insera and tissue of patients with capsular contracture after augmentation with Trilucent breast implants. Plast Reconstr Surg 114, 2004, 229-236 more…
  • Will, J., Haugen, H., Zügner, S., Wintermantel, E.: Manufacturing of Biocompatible TiO2-Surface-Structures with a Water Based Tape Casting. Key Engineering Material 254-256, 2004, 937-940 more…

Conference Presentations, Posters and Proceedings

2018

  • Ahrens, Markus: Bioelektrete für Verpackungsanwendungen – Lehrstuhlvorstellung und Arbeitspakete am MedTech. KickOff Meeting "Bioelektrete für Verpackungsanwendungen", 2018 more…
  • Ahrens, Markus: Machbarkeitsstudie: System zur kontinuierlichen Erfassung von gesundheitsrelevanten Parametern im Mundraum. Treffen CoP "IoT und Werkstoffe", 2018 more…
  • Ahrens, Markus; Fischer, Theresa; Zuber, Nina; Eblenkamp, Markus: Antimicrobial Activity of a Titanium Dioxide (TiO2) Additivated Thermoset. 1st Singaporean-German Symposium on Medical Plastics Engineering, 2018 more…
  • Ahrens, Markus; Fischer, Theresa; Zuber, Nina; Eblenkamp, Markus: Antimikrobielle Wirksamkeit eines mit Titandioxid (TiO2) additivierten Duroplasts. IK 2018 Biozide – Materialien, Anwendungen und Trends, 2018 more…
  • Bauer, F. X.; Grill, F. D.; Gau, D.; Wolff, K.-D.; Loeffelbein, D.J.: RapidNAM: Automated generation of nasoalveolarmolding plates for cleft lip and palate treatment. ICPF Congress, 2018 more…
  • Eblenkamp, Markus: Medical Plastics Engineering. Collin Technology Days 2019, 2018 more…
  • Eblenkamp, Markus: Tissue-Engineering mit 3D-Druck. Viszeralmedizin 2018, 2018 more…
  • Eblenkamp, Markus: Medical Plastics Engineering @ TUM. 1st Singaporean-German Symposium on Medical Plastics Engineering, 2018 more…
  • Eblenkamp, Markus; Bauer, Franz: Additive Kunststoffverarbeitung @ MedTech. Forum MedtechPharma, Workshop: Innovationen in der Zahnheilkunde: Anwendungen der Additiven Fertigung, 2018 more…
  • Eblenkamp, Markus; Jodeit, Fabian; Bauer, Franz: MedTech OneWorld Center for International Medical Engineering. Symposium Sustainable Developement in Africa, 2018 more…
  • Fischer, T: Entwicklung selbst-desinfizierender und beständiger Kunststoffoberflächen auf Basis von photokatalytisch aktivem Titandioxid für Hygieneanwendungen. Antimik 2 Projekttreffen, 2018 more…
  • Fischer, Theresa: Antimikrobielle Wirksamkeit von photokatalytisch aktivem Titandioxid in Silikonelastomeren. IK 2018 Biozide – Materialien, Anwendungen und Trends, 2018 more…
  • Haerst, M.: 3D-printing of plastics for medical applications. Arab Health 2018, Business Forum, 2018 more…
  • Leonhardt, Stefan: Additive Fertigung von Medizinprodukten mit PEEK. 3D-Tage 2018, 2018 more…
  • Leonhardt, Stefan; Eblenkamp, Markus: Additive Fertigung in der Lehre und Ausbildung. Expertenkreis Additive Fertigung in der Medizintechnik, 2018 more…
  • Müller, Kilian; Leonhardt, Stefan: Additive Manufacturing of Medical Grade Plastics - Why Fused Filament Fabrication is Best Practice. 1st Singaporean-German Symposium on Medical Plastics Engineering, 2018 more…
  • Werner, V.: Biokompatible Integration von IoT-Elektronik in Kunststoffbauteile. Kunststoffe in der Medizintechnik, 2018 more…
  • Werner, Valerie; Eblenkamp, Markus: IoT & Materials: Realization of Smart Biomedical Plastic Devices. 1st Singaporean-German Symposium on Medical Plastics Parts, 2018 more…
  • Zeppenfeld, M.: Prozessüberwachungsmöglichkeit IM Spritzgießbauteil mittels RFID-Sensoren. AKZEPT-PP Anwendungs-und Kompetenz-Zentrum für Polymer Technologie, 2018 more…

2017

  • Bauer, F., Güll, F., Gau, D.: Automatisierte Erstellung von Nasoalveolar Molding Platten. Fachtagung - Neue Fertigungsstrategien in der Medizintechnik - FAPS, 2017 more…
  • Düregger, K.: Kunststoffe im Blutkontakt: Gefahren, Prüfung und Lösungen. AKZEPT Meeting, 2017 more…
  • Düregger, K., Frenzel, S., Eblenkamp, M.: Autologous fibrin glue: automated production and adhesive quality. BMTMedPhys 2017 - Jahrestagung der Biomedizinischen Technik und Dreiländertagung der Medizinischen Physik, 2017 more…
  • Eblenkamp, M., Fischer, S., Pammer, S., Kasböck, S., Leonhardt, S.: Additive Manufactured Multimicrophasic (MMP) Systems for Biomedical Applications – Perspectives and Concepts. BMTMedPhys 2017 - Jahrestagung der Biomedizinischen Technik und Dreiländertagung der Medizinischen Physik, 2017 more…
  • Eblenkamp, M., Schweiger, J., Güth, J.-F.: CoP "IoT & Werkstoffe". Regionalkonferenz Zentrum Digitalisierung Bayern (ZD.B), 2017 more…
  • Fischer, T., Ahrens, M., Eblenkamp, M.: Photocatalytically Active Titanium Dioxide - Silicone Rubber. 33rd International Conference of the Polymer Processing Society (PPS-33), 2017 more…
  • Fischer, T., Ahrens, M., Yatsenko, S., Rudloff, J., Lang, M., Heidemeyer, P., Bastian, M., Eblenkamp, M.: Self-cleaning Materials using the Photocatalytic Effect of Titanium Dioxide. BMTMedPhys 2017 - Jahrestagung der Biomedizinischen Technik und Dreiländertagung der Medizinischen Physik, 2017 more…
  • Fischer, T.; Ahrens, M.; Eblenkamp, M.: Photocatalytically Active Titanium Dioxide - Silicone Rubber. 33rd International Conference of the Polymer Processing Society (PPS-33), 2017 more…
  • Gattinger, J., Fischer, S.: Novel Fused Filament Fabrication Procedure and Printhead to Process Thermoplastic Elastomers. 33rd International Conference of the Polymer Processing Society (PPS-33), 2017 more…
  • Gattinger, J., Köppl, R., Zeppenfeld, M.: Compounding and Direct Compounding of Crimped Fiber Reinforced Thermoplastic Elastomers. 33rd International Conference of the Polymer Processing Society (PPS-33), 2017 more…
  • Gattinger, J.; Fischer, S.: Novel Fused Filament Fabrication Procedure and Printhead to Process Thermoplastic Elastomers. 33rd International Conference of the Polymer Processing Society (PPS-33), 2017 more…
  • Gattinger, J.; Köppl, R.; Zeppenfeld, M.: Compounding and Direct Compounding of Crimped Fiber Reinforced Thermoplastic Elastomers. 33rd International Conference of the Polymer Processing Society (PPS-33), 2017 more…
  • Güll F. D. et Bauer F. X., Rau, A., Ritschl L. M., Gau, D., Gruber M., Roth M., Wolff, K.-D., Loeffelbein D. J.: RapidNAM – Automatisierung des Nasoalveolar Moldings: Vom Konzept zur klinischen Anwendung. 67. Jahrestagung der Arbeitsgemeinschaft Kieferchirurgie / 38. Jahrestagung des Arbeitskreises für Oralpathologie und Oralmedizin, 2017 more…
  • Haerst, M., Leonhardt, S.: Additive Fertigung von Hochleistungspolymeren für die Medizintechnik. Bayerischer Patentkongress 2017, 2017 more…
  • Henhammer, A., Pammer, S.: Additive Manufacturing for Medical Applications. TechMatch, 2017 more…
  • Leonhardt, S.: Additive Fertigung von Medizinprodukten aus Hochleistungskunststoffen. Fachtagung - Neue Fertigungsstrategien in der Medizintechnik - FAPS, 2017 more…
  • Leonhardt, S., Haerst, M., Fischer, S., Pammer, S., Bauer, F., Eblenkamp, M.: "Medical Grade" polymeric additive manufacturing technologies. BMTMedPhys 2017 - Jahrestagung der Biomedizinischen Technik und Dreiländertagung der Medizinischen Physik, 2017 more…
  • Leonhardt, S., Klare, M., Ling, J.: Wie viel Druck braucht die Biomedizin noch? Neue Herausforderungen und Lösungen für die Biomedizin durch 3D-Druck. Innovation Forum Medizintechnik, 2017 more…
  • Schweigert, S. , Lindemann, U., Seitz, V., Wintermantel, E.: Methodical product development in medical engineering—A case study on radiography systems. 6th International Conference on Research into Design, ICoRD 2017 (Smart Innovation, Systems and Technologies), 2017 more…
  • Werner, V.: Umspritzen von Leiterplatten. Struers Workshop München, 2017 more…
  • Werner, V., Müller, T., Qi, X., Zeppenfeld, M., Eblenkamp, M.: Fertigungsstrategien zur funktionserhaltenden und biokompatiblen Integration von IoT-Bauteilen in medizinisch relevante Kunststoffe. MikroSystemTechnik Kongress 2017, 2017 more…
  • Werner, V., Müller, T., Qi, X., Zeppenfeld, M., Eblenkamp, M.: Fertigungsstrategien zur funktionserhaltenden und biokompatiblen Integration von IoT-Bauteilen in medizinisch relevante Kunststoffe. MikroSystemTechnik Kongress 2017, VDE VERLAG GMBH, 2017 more…
  • Werner, V., Zeppenfeld, M., Eblenkamp, M.: IoT & Werkstoffe: HF-Eigenschaften medizinischer Kunststoffe. RFID-AZM Netzwerkabend 11.07.2017, 2017 more…
  • Zeppenfeld, M., Gattinger, J., Robeck, A.: Maßhaltigkeit im Thermoplastspritzguss. F+E Leiter Kreis „Fertigungstoleranzen im Spritzguss“, 2017 more…
  • Zeppenfeld, M., Hirn, R., Schiele, S., Werner, V., Eblenkamp, M.: Communication with Passive RFID Sensor Tags during Injection Molding of Medical Plastic Parts. Smart SysTech 2017: European Conference on Smart Objects, Systems and Technologies, 2017 more…
  • Zeppenfeld, M., Hirn, R., Schiele, S., Werner, V., Eblenkamp, M.: Communication with Passive RFID Sensor Tags during Injection Molding of Medical Plastic Parts. Smart SysTech 2017: European Conference on Smart Objects, Systems and Technologies, VDE VERLAG GMBH, 2017 more…
  • Zeppenfeld, M., Müller, B., Heyl, S.: Influence of Insert Component Position and Geometry on Shrinkage in Thermoplastic Insert Molding. 33rd International Conference of the Polymer Processing Society (PPS-33), 2017 more…
  • Zeppenfeld, M., Trescher, M., Robeck, A., Gattinger, J.: Comparison of cold and hot runner system concerning part accuracy in thermoplastic injection molding. 33rd International Conference of the Polymer Processing Society (PPS-33), 2017 more…
  • Zeppenfeld, M.; Müller, B.; Heyl, S.: Influence of Insert Component Position and Geometry on Shrinkage in Thermoplastic Insert Molding. 33rd International Conference of the Polymer Processing Society (PPS-33), 2017 more…

2016

  • Bauer, F. X., Gau, D., Guell, F., Eblenkamp, M., Loeffelbein, D. J.: Automated detection of alveolar arches fornasoalveolar molding in cleft lip and palate treatment. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering, 2016 more…
  • Bauer, F. X., Gau, D., Guell, F., Eblenkamp, M., Loeffelbein, D. J.: Automated detection of alveolar arches for nasoalveolar molding in cleft lip and palate treatment. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering (Current Directions in Biomedical Engineering 2016), De Gruyter Current Directions in Biomedical Engineering 2016, 2016 more…
  • Bauer, F., Dikel, H., Eblenkamp, M., Guell, F., Loeffelbein, D. J.: Development of a detachable nasal stent to facilitate nasoalveolar molding. 16th International Conference on Biomedical Engineering, IFMBE Proceedings, 2016 more…
  • Boudot, C., Burkhardt, S., Haerst, S.: Long-term stable modifications of silicone elastomer for improved hemocompatibility. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering, 2016 more…
  • Boudot, C., Burkhardt, S., Haerst, S.: Long-term stable modifications of silicone elastomer for improved hemocompatibility. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering (Current Directions in Biomedical Engineering 2016), De Gruyter Current Directions in Biomedical Engineering 2016, 2016 more…
  • Düregger, K., Gäble, A., Wacker, S., Eblenkamp, M.: Development and Biological Evaluation of a Spraying Device for Autologous Platelet-Rich Blood Derivatives. 16th International Conference on Biomedical Engineering, IFMBE Proceedings, 2016 more…
  • Düregger, K., Kreh, J., Eblenkamp, M.: Replacement of Fetal Bovine Serum by Human Blood Serum: Fully Automated Serum Production and Effect on Fibroblast Cell Proliferation. 16th International Conference on Biomedical Engineering, IFMBE Proceedings, 2016 more…
  • Düregger, K., Peng, A., Eblenkamp, M.: Influence of storage conditions on the release of growth factors in platelet-rich blood derivatives. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering, 2016 more…
  • Düregger, K., Peng, A., Eblenkamp, M.: Influence of storage conditions on the release of growth factors in platelet-rich blood derivatives. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering (Current Directions in Biomedical Engineering 2016), De Gruyter Current Directions in Biomedical Engineering 2016, 2016 more…
  • Eblenkamp, M., Burkhardt, S., Schuh, M., Leonhardt, S.: 3-D Printed Bioreactors: Perspectives and Concepts. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering (Biomedical Engineering / Biomedizinische Technik), De Gruyter Biomedical Engineering / Biomedizinische Technik, 2016 more…
  • Fischer, T.: Funktionalisierung von medizinischen Materialien mit photokatalytisch wirksamem Titandioxid. 4. Photokatalyse-Kolloquium - Trends der Photokatalyse für die Praxis, 2016 more…
  • Gattinger, J., Bullemer, C. N., Harrysson, O. L. A.: Patient specific root-analogue dental implants – additive manufacturing and finite element analysis. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering (Current Directions in Biomedical Engineering 2016), De Gruyter Current Directions in Biomedical Engineering 2016, 2016 more…
  • Gattinger, J., Bullemer, C. N., Harrysson, O. L. A.: Patient specific root-analogue dental implants – additive manufacturing and finite element analysis. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering, 2016 more…
  • Gattinger, J., Dorn, M., Hemmerle, S., Zeppenfeld, M.: Spritzgießsimulation zur Abschätzung der Maßhaltigkeit von Bauteilen aus Mehrkavitätenwerkzeugen. Qualitätsgipfel Kunststoffe: Internationale Fachtagung für Qualität in der Kunststoffbranche, 2016 more…
  • Güll F. D., Bauer F. X., Roth M., Ritschl L. M., Gruber M., Gau D., Loeffelbein D. J.: Postnatales Oberkieferwachstum bei Neugeborenen während der ersten sechs Lebensmonate. LKG Symposium, Deutscher interdisziplinärer Arbeitskreis Lippen-Kiefer-Gaumenspalten/ Kraniofaziale Anomalien/ German Clef Palate Craniofacial (GCPA),, 2016 more…
  • Güll, F. D., Bauer, F. X., Gruber, M., Gau, D., Dikel, H., Zapf, D., DiBora, B., Ritschl, L. M., Rau, A., Roth, M., Wolff, K.-D., Loeffelbein, D. J.: RapidNAM Ein Konzept zur Automatisierung des Nasoalveolar Moldings mit klinischer Anwendung. 66. Jahrestagung der AG Kieferchirurgie, 2016 more…
  • Haerst, M. J.: Extrusion of Liquid Silicone Rubber. 16th Annual International Polymer Colloquium, 2016 more…
  • Haerst, M. J.: Innovative Extrusion Process for Liquid Silicone Rubber: Calculation versus Experiment. SPE ANTEC 2016 Indianapolis, 2016 more…
  • Haerst, M., Ahrens, M., Boudot, C., Eblenkamp, M.: Hydrophilization of Silicone Elastomers for Medical Applications using Polyethylene Glycol. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering, 2016 more…
  • Krampe, E. Haerst, M., Wintermantel, E.: Entwicklung einer patientenoptimierten Bandscheibentotalendoprothese: Von einer Idee zum Implantatkonzept. Kunststoffe in der Medizintechnik - Friedrichshafen, 2016 more…
  • Leonhardt, S., Klare, M., Scheer, M., Fischer, T., Cordes, B., Eblenkamp, M.: Biocompatibility of photopolymers for additive manufacturing. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering, 2016 more…
  • Leonhardt, S., Klare, M., Scheer, M., Fischer, T., Cordes, B., Eblenkamp, M.: Biocompatibility of photopolymers for additive manufacturing. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering (Current Directions in Biomedical Engineering 2016), De Gruyter Current Directions in Biomedical Engineering 2016, 2016 more…
  • Micheler, C., Krampe, E., Foehr, P., Haerst, M., Burgkart, R.: Abrasion Tests of a Tribological System of Total Intervertebral Disc Prosthesis with dampening characteristics. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering, 2016 more…
  • Micheler, C., Krampe, E., Foehr, P., Haerst, M., Burgkart, R.: Abrasion Tests of a Tribological System of Total Intervertebral Disc Prosthesis with dampening characteristics. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering (Current Directions in Biomedical Engineering 2016), De Gruyter Current Directions in Biomedical Engineering 2016, 2016 more…
  • Rapp, C., Baumgärtel, A., Artmann, L., Eblenkamp, M., Asad, S. S.: Open air plasma deposited antimicrobial SiOx/TiOx composite films for biomedical applications. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering, 2016 more…
  • Rapp, C., Baumgärtel, A., Artmann, L., Eblenkamp, M., Asad, S. S.: Open air plasma deposited antimicrobial SiOx/TiOx composite films for biomedical applications. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering (Current Directions in Biomedical Engineering 2016), De Gruyter Current Directions in Biomedical Engineering 2016, 2016 more…
  • Rapp, C., Klose, M., Eblenkamp, M., Buske, C., Asad, S. S.: Atmospheric plasma deposited silicon based organic/inorganic hybrid coatings on stainless steel for medical implants. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering, 2016 more…
  • Ritschl L. M., Güll F. D., Bauer F. X., Wölfle F., Heinrich V., Hedderich D., Rau A., Wolff K. D., Loeffelbein D. J.: Evaluation auftretender Kraftverteilungen im Rahmen des Nasoalveolären Moldings: eine Finite Element Analyse. LKG Symposium, Deutscher interdisziplinärer Arbeitskreis Lippen-Kiefer-Gaumenspalten/ Kraniofaziale Anomalien/ German Clef Palate Craniofacial (GCPA),, 2016 more…
  • Schuh, M. B., Kirsch, M., Dillman, D., Breuer, F., Eblenkamp, M.: Climate retainment in carbon dioxide incubators. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering, 2016 more…
  • Schuh, M. B., Schubert, B., Eblenkamp, M.: Tracer gas analysis to quantify natural convection and atmosphere exchange in carbon dioxide incubators. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering, 2016 more…
  • Werner, V., Rehekampff, C., Dengler, S., Zeppenfeld, M., Eblenkamp, M.: Integration of electronic components into medical plastic parts by injection molding. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering, 2016 more…
  • Werner, V., Zeppenfeld, M., Eblenkamp, M.: SmartMold medical: Integration von IoT-Elektronik in medizinische Kunststoffbauteile. RFID Anwenderabend, 2016 more…
  • Zeppenfeld, M., Hirn, R., Gattinger, J.: Vergleich moderner Methoden zur Nachdruckumschaltung im Spritzgießprozess hinsichtlich Bauteilmaßhaltigkeit. Qualitätsgipfel Kunststoffe: Internationale Fachtagung für Qualität in der Kunststoffbranche, 2016 more…
  • Zeppenfeld, M., Wardenberg, M., Rapp, C., Eblenkamp, M.: Protection of active implant electronics with organosilicon open air plasma coating for plastic overmolding. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering, 2016 more…
  • Zeppenfeld, M., Wardenberg, M., Rapp, C., Eblenkamp, M.: Protection of active implant electronics with organosilicon open air plasma coating for plastic overmolding. BMT 2016 "Dreiländertagung" Swiss, Austrian and German Societies of Biomedical Engineering (Current Directions in Biomedical Engineering 2016), De Gruyter Current Directions in Biomedical Engineering 2016, 2016 more…

2015

  • Koller, S., Beck, S., Fleischer, J., Wintermantel, E., Feussner, H., Schneider, A.: A modular platform for single-use manipulators with tendon wire and hydraulic actuation systems for minimally invasive and endoscopic surgery (NOTES). , 2015 more…
  • Koller, S., Beck, S., Fleischer, J., Wintermantel, E., Feussner, H., Schneider, A.: A Modular Platform for Single-Use Manipulators with Tendon Wire and Hydraulic Actuation Systems for Minimally Invasive and Endoscopic Surgery (NOTES). Design of Medical Devices Conference Europe Edition, 2015 more…
  • Koller, S., Ostler, D., Horst, G., Ulbrich, H., Wintermantel, E., Feussner, H., Schneider, A.: SISTUM – The Single Incision System of the Technische Universität München. IEEE ROBIO 2015, IEEE International Conference on Robotics and Biomimetics, 2015 more…
  • Konig, F. H., Hagl, C., Wintermantel, E., Thierfelder, N.: A Modular, Adaptable and Automated Bioreactor - A New Standard in Cardiovascular Tissue Engineering. 4th TERMIS World Congress, 2015ISI Document Delivery No.: CP9HR Times Cited: 0 Cited Reference Count: 0 Koenig, F. H. Hagl, C. Wintermantel, E. Thierfelder, N. 4th TERMIS World Congress Sep 08-11, 2015 Boston, MA Termis 0 1 Mary ann liebert, inc New rochelle 1937-335x more…
  • Konig, F.H., Hagl, C., Wintermantel, E., Thierfelder, N.: Challenges and Strategies in Bioreactor Development An Engineers Point of View. 4th TERMIS World Congress, 2015 more…
  • Lenich, A., Nieborowsky, S., Schreiber, U., Seitz, V., Wintermantel E.: Entwicklung eines Oberflächenersatzes für das Capitulum Humeri - Validierung eines Prototypen. 22. Jahreskongress der Deutschen Vereinigung für Schulter- und Ellenbogenchirurgie (DSVE) e. V, 2015 more…
  • Lenich, A., Nieborowsky, S., Schreiber, U., Seitz, V., Wintermantel E.: Entwicklung eines Oberflächenersatzes für das Capitulum Humeri - Validierung eines Prototypen. 22. Jahreskongress der Deutschen Vereinigung für Schulter- und Ellenbogenchirurgie (DSVE) e. V, 2015 more…
  • Loeffelbein, D. J., Rau, A., Wolff, K.-D., Schönberger, M., Gattinger, J., Wintermantel, E.: Virtuelles Nasoalveolar Molding - Analyse softwareunterstützter Modellierungstechniken. 27. Symposium des Deutschen interdisziplinären Arbeitskreises für Lippen-Kiefer-Gaumen-Spalten/Kraniofaziale Anomalien, 2015 more…
  • Nieborowsky, S., Schreiber, U. Seitz, V., Wintermantel, E., Lenich, A.: Entwicklung eines Oberflächenersatzes für das Capitulum Humeri - Methode der morphologischen Analyse. 22. Jahreskongress der Deutschen Vereinigung für Schulter- und Ellenbogenchirurgie (DSVE) e. V, 2015 more…
  • Rapp, C., Baumgärtel, A., Klose, M., Schmid, S., Knospe, A., Buske, C., Wintermantel, E.: SiOx/TiO2 composite coatings deposited by open air atmospheric pressure plasma jet for bone implants. AEPSE, 2015 more…
  • Rapp, C., Knospe, A., Buske, C., Wintermantel, E.: The antibacterial effect of TiO2 coatings deposited by open air atmospheric pressure plasma jet with a TTIB sol precursor on surgical stainless steel. ECOSS, 2015 more…
  • Rau, A., Wolff, K.-D., Schönberger, M., Gattinger, J., Wintermantel, E., Loeffelbein, D.: Virtuelles Nasoalveolar Molding - Softwareunterstützte Modellierungstechniken im Vergleich. 65. Jahrestagung der Arbeitsgemeinschaft für Kieferchirurgie & 36. Jahrestagung des Arbeitskreises für Oralpathologie und Oralmedizin, 2015 more…
  • Ritschl, L., Rau, A., Wolff, K.-D., Schönberger, M., Gattinger, J.,Wintermantel, E., Loeffelbein, D.: Analyse softwareunterstützter Modellierungstechniken beim Nasoalveolar Molding. 65. Kongress der Deutschen Gesellschaft für Mund-, Kiefer- und Gesichtschirurgie, 2015 more…
  • Seitz, V., Hoffstetter, M., Schönberger, M., Wintermantel, E.: Sterilization Effects on Hard-Soft Combined Polymers for Medical Application. ANTEC 2015, 2015 more…
  • Seitz, V., Hoffstetter, M., Schönberger, M., Wintermantel, E.: Sterilization Effects on Hard-Soft Combined Polymers for Medical Application. 15h Annual International Polymer Colloquium, 2015 more…
  • Seitz, V., Hoffstetter, M., Schönberger, M., Wintermantel, E.: Sterilization Effects on Hard-Soft Combined Polymers for Medical Application. ANTEC 2015 - Proceedings of the Technical Conference & Exhibition, 2015 more…
  • Thierfelder, N., Grun, M., Hagl, C., Wintermantel, E., Konig, F. H.: Automation of Tissue Decellularization - Increasing Stability, Safety and Possibilities. 4th TERMIS World Congress, 2015, 208-208 more…

2014

  • Boudot, C., Freihart, K., Linder, A., Eblenkamp, M., Haerst,M., Wintermantel, E.: Surface Functionalization of Silicone Rubber for Improved Cell Adhesion. 48. Annual Conference of the DGBMT, 2014BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK more…
  • Dierkesmann, K., Krampe, E., Wintermantel, E.: Development of an MR-safe and MR-compatible Catheter Guidewire using carbon fiber reinforced plastics. Kunststoffprodukte in der Medizin - Endoskope und Katheter, 2014 more…
  • Froehlich, M., Strohmayr, M., Seibold, U., Krampe, E., Wintermantel, E.: Towards Realistic Haptic Organ Phantoms for Medical Training. 48. Annual Conference of the DGBMT, 2014BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK more…
  • Gattinger, J., Schönberger, M., Wintermantel, E., Rau, A., Wolff, K.D., Loeffelbein, D.J.: Computer aided Modelling of Nasoalveolar Molding Devices for Cleft Lip and Palate Treatment. 48th DGBMT Annual Conference, 2014BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK more…
  • Haerst, M., Ahrens, M., Seitz, V., Wintermantel, E.: Electrospinning of commercially available silicone rubber. 48. Annual Conference of the DGBMT, 2014BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK more…
  • Haerst, M., Engelsing, K.: Einflüsse von Reinigung, Desinfektion und Sterilisation auf Kunststoffe in Medizinprodukten. Fachtagung Kunststoffprodukte in der Medizin - Endoskope und Katheter, 2014 more…
  • Huppmann, T., Wintermantel, E.: Geeignete Matrixsysteme für titandioxidbasierte antimikrobielle Kunststoffe. VDI Fachtagung Kunststoffe in der Medizintechnik, 2014 more…
  • Koller, S., Fiolka, A., Schneider, A., Schönberger, M., Wintermantel, E., Feußner, H.: Entwicklung eines Single-Use-Applikators für endoskopische Nieten bei NOTES-Eingriffen. Kunststoffprodukte in der Medizin - Endoskope und Katheter, 2014 more…
  • Rapp, C., Huppmann, T., Gattinger, J., Eblenkamp, M., Wintermantel, E.: Improving the antibacterial effect of polyamide 12 by functionalization of titanium dioxide nanoparticles. 48. Annual Conference of the DGBMT, 2014BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK more…
  • Schuh, M., Grob, S., Seitz, V., Schonberger, M., Eblenkamp, M.: Comparison of three active humidifiers for re-establishing of saturation in carbon dioxide incubators. 48. Annual Conference of the DGBMT, 2014BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK more…
  • Schönberger, M., Schaller, C., Seitz, V., Haerst, M., Eblenkamp, M., Wintermantel, E.: Suitability of OpenAir Plasma Beams for Medical Device Sterilization. 48. Annual Conference of the DGBMT, 2014BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK more…
  • Seitz, V., Hoffstetter, M., Haerst, M., Krampe, E., Wintermantel, E.: Polymeric Hard-Soft-Combinations by Multi-Component Injection Molding for Small Medical Devices. 48. Annual Conference of the DGBMT, 2014BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK more…
  • Wiederer, C., Fröhlich, M., Krampe, E., Wintermantel, E., Strohmayr, M.: Towards tactile sensation in laparoscopic surgery. Kunststoffprodukte in der Medizin - Endoskope und Katheter, 2014 more…

2013

  • Horper, M., Kohn, N., Horst, G., Koller, S., Fiolka, A., Schneider, A., Krampe, E., Feußner, H., Ulbrich, H., Wintermantel, E.: A visualization chain for mechatronic platforms in Single-Port surgery and NOTES. 1st Russian-German Conference on Biomedical Engineering, 201323-24.10.2013 more…
  • Huppmann, T.: Antimicrobial Polymers – The Antibacterial Effect of Photoactivated Nano Titanium Dioxide Polymer Composites. PPS 29, Nürnberg, 2013 more…
  • Huppmann, T.: Antimikrobielle Wirkung von Bauteilen aus Titandioxid-Kunststoff-Kompositen. 9.ThGOT Thementage Grenz- und Oberflächentechnik, 2013 more…

2012

  • Horper, M., Krampe, E., Plaza, G., Wintermantel E.: Seide transgener Seidenspinner – Mechanische Eigenschaften. GNDÄ, 2012Göttingen more…
  • Novotny, F., Wacker, S., Eblenkamp, M., Wintermantel, E.: Anticoagulant for autologous platelet concentrates. EWMA Journal 12(2), 2012 more…
  • Pliszka, D., Busch, D., Gora, A., Eblenkamp, M., Wintermantel, E., Ramakrishna, S.: Keynote: Compliant degradable electrospun nano-fibre structures for cardio vascular engineering. Journal of Tissue Engineering and Regenerative Medecine, 2012, 142-142 more…

2011

  • Eblenkamp, M., Pigerl, M., Pfeifer, S., Scholze, L., Bayerlein F., Grob, S., Binder, M., Damberger, F., Birzle, A., Wintermantel, E.: Cloud Computing in Biomedical Research – A novel integrated web based image analysis system. 7th Russian-Bavarian Conference on Biomedical Engineering - RBC 2011, 2011 more…
  • Zeppenfeld, M., Bertoldi, S., Krampe, E., Wintermantel, E., Fare, S., Tanzi, M.C.: Characterization of PU composite scaffolds for bone regeneration. Jahrestagung der Deutschen Gesellschaft für Biomaterialien, 201110.-12. November 2011 more…
  • Zeppenfeld, M., Bertoldi, S., Krampe, E., Wintermantel, E., Fare, S., Tanzib, M.C.: Characterization of PU composite scaffolds for bone regeneration. Jahrestagung der Deutschen Gesellschaft für Biomaterialien 2011, 2011 more…

2010

  • Athelogou, M., Eblenkamp, M., Schmidt, G., Novotny, F., Wintermantel, E., Binnig, G.: Single-Cell Detection and Classification in Phase Contrast Images. The 10th IEEE International Conference on Information Technology and Applications in Biomedicine, 2010 more…
  • Krampe, E., Dierkesmann, K., Jumpertz, I., Wintermantel, E.: Kunststoffverarbeitung für die therapeutische Medizintechnik: MRT-kompatibler Katheterführungsdraht. VDI Wissensforum GmbH, Kunststoffe in der Medizintechnik, 2010 more…

2009

  • Hoffstetter, M., Ebert, K., Schaumann, M., Wintermantel, E.: Novel Designs for Middle Ear Implants Produced by Micro Injection Molding. World Congress on Medical Physics and Biomedical Engineering, 2009 more…
  • Neubert, S., Eblenkamp., E., Pliszka, D., Sundarrajan, S., Ramakrishna, S., Wintermantel, E.: Precise Deposition of Electrospun Nanofibers and Electrospraying of Nanoparticles as Enabling Techniques for Biomedical Engineering Applications. World Congress on Medical Physics and Biomedical Engineering, 2009 more…
  • Pfeifer, S., Loeffelbein, D., Opitz, R., Wolff, K., Wintermantel, E.: Preclinical Analysis of Stents for Microvascular Anastomoses: A Method to Anlayse the Tensile Strength. World Congress on Medical Physics and Biomedical Engineering, 2009 more…
  • Radina, C., Krampe, E., Edlauer, M., Winkler, P., Wintermantel, E.: Development of Radiolucent Headholder Pins for Intraoperative CT-Imaging. World Congress on Medical Physics and Biomedical Engineering, 2009 more…
  • Wu, H., Krampe, E., Schlicht, H., Wintermantel, E.: Application of a microcellular injection molding process (MuCell®) to produce an implant with porous structure. World Congress on Medical Physics and Biomedical Engineering, 2009 more…
  • Wu, H., Wacker, S., Schlicht, H., Wintermantel, E.: Cytological evaluation of a porous implant made from TPU. World Congress on Medical Physics and Biomedical Engineering, 2009 more…
  • Xiong, F., Goetz, W., Chua, Y., Zhang, P., Pfeifer, S., Wintermantel, E., Yeo, J.: Effect of Leaflet Geometry on Mechanical Performance of Stentless Pericardial Aortic Valves – A Dynamic Simulation. World Congress on Medical Physics and Biomedical Engineering, 2009 more…

2008

  • Jumpertz, I., Ammer, D., Wintermantel, E.: Spritzgießen von biokompatiblen Medizinprodukten. 7. Benediktbeurer Reinraumtage, 2008 more…
  • Laar, N., Wintermantel, E.: Entwicklung eines resorbierbaren, wirkstofftragenden Harnblasenimplantates. VDI-Fachtagung Kunststoffe in der Medizintechnik, 2008 more…
  • Schneider, A., Meining, A., Wilhelm, D., v. Delius, S., Can, S., Fiolka, A., Schlicht, H., Wintermantel, E., Feussner, H.: A new systems solution to make scarless surgery feasible. 4th Russian-Bavarian Conference on Bio-Medical Engineering, 2008 more…
  • Strohmayr, M.W., van der smagt, P., Saal, H., Ammer, D., Jumpertz, I., Krampe, E., Hirzinger, G., Wintermantel, E.: The DLR Artificial Skin A Flexible Tactile Sensor for Robotic Hands. MBEC Conference, 2008 more…

2007

  • Dumm, M., Hinz, D., Wintermantel, E.: Trainerausbildung Rodeln - Materialkunde. Trainerausbildung Rodeln, 2007 more…
  • Eblenkamp, M.: S.CORE- Neue Möglichkeiten der automatischen Bildanalyse für Life Science Forschung. Institut für Prophylaxe und Epidemiologie der Kreislaufkrankheiten, 2007 more…
  • Hoffstetter, M.: Mikrospritzgussverfahren für Mittelohrprothesen. Jahrestagung der Deutschen Gesellschaft für Biomaterialien, 2007 more…
  • Hoffstetter, M., Wintermantel, E.: New rotation free-ballon catheter assembly for the reduction of vascular trauma during stent implantation. 41. Jahrestagung der DGBMT, 2007 more…
  • Perea, H.: Magnetically driven endothelialisation of synthetic vascular grafts. 4th Symposium Vascular Biology in Medicine, 2007 more…
  • Perea, H.: Magnetisches Seeding von Endothelzellen in tubulären Strukturen für den Blutgefässersatz: Stand der Technik. Kardiochirurgisches Seminar, Deutsches Herzzentrum München, 2007 more…
  • Perea, H.: Magnetunterstütztes Einsäen von Endothelzellen in tubuläre Strukturen für den Blutgefässersatz. Monatliches Seminar des Instituts für Prophylaxe und Epidemiologie der Kreislaufkrankheiten an der LMU, 2007 more…
  • Perea, H.: Engineering vascular tissue with magnetic nanoparticles: seeing deeper. Annual Meeting of Tissue Engineering and Regenerative Medicine Society, 2007 more…
  • Schlicht, H., Wu, H., Wintermantel, E.: BioValve Projekt. Institut Seminar des Department of biomaterials, Faculty of Dentistry, 2007 more…
  • Wu, H., Wintermantel, E.: Poly(ether)urethane foams made by microcellular injection molding for biomedical applications. 41. Jahrestagung der DGBMT, 2007 more…

2006

  • Dittmann, R., Vital, A., Wintermantel, E., Graule, T.: Nanopowders for ceramic based nanomaterials with application in medicine. 11th International Ceramic Congress & 4th Forum on New Materials, 2006 more…
  • Dumm, M., Hainzlmaier, C., Boerboom, S., Wintermantel, E.: The effect of pressure on friction of steel and ice and impementation to bobsleigh runners. The Engineering of Sport 6th International Conference, 2006 more…
  • Schratzenstaller, T., Renke-Gluszko, M., Stöver, M., Ammer, D., Forster, B., Wintermantel, E.: In vitro analysis of the expansion behaviour of coronary stents. World Congress of Medical Physics and Medical Engineering "Imaging the future medicine, 2006 more…
  • Wende, C.: Das Projekt Hepa Wash. Dialyse im Zentrum DIZ, 2006 more…

2005

  • Boerboom, S., Hainzlmaier, C., Kraus, F., Wintermantel, E.: Tribologie im Stahl-Eis-Kontakt: Einfluss des Druckes. DIVERS Workshop: Wechselwirjung zwischen Materialtechnologie & Bewegungsanalyse im Sport, 2005 more…
  • Fischer, K., Eblenkamp, M., Hollweck, T., Hintermair, J., Hopfner, U., Potthoff, S., Jacobs, V.R., Gottschalk, N., Niemeyer, M., Aigner, J., Wintermantel, E.: The umbilical cord as a resource: Creation and characterization of 3-D cell and tissue constructs built from umbilical cord components. 2nd World Congress on Regenerative Medecine, 2005 more…
  • Hollweck, T., Aigner, J., Fischer, K., Hintermair, J., Hopfner, U., Potthoff, S., Jacobs, V.R., Gottschalk, N. Niemeyer, M., Eblenkamp, M., Wintermantel, E.: The umbilical cord as a resource: Cryopreservation of Umbilical Cord Matrix Cells (UCMC). 2nd World Congress on Regenerative Medecine, 2005 more…
  • Kraus, F., Boerboom, S., Hainzlmaier, C., Wintermantel, E.: Change of friction on ice with increasing chromium level in bobsleigh. 10th Annual Congress of the European College of Sport Science, 2005 more…
  • Kraus, F., Boerboom, S., Hainzlmaier, C., Wintermantel, E.: A new experimental model for the effect of pressure on the friction between steel and ice. Asia-Pacific Congress on Sports Technology, 2005 more…
  • Perea, H.: Magnetically induced cell distributions. 12th International Conference on Biomedical Engineering, 2005 more…
  • Renke-Gluszko, M., Schratzenstaller, T., Stöver, M., Will, J., Behnisch, B., Wintermantel, E., Schömig, A.: Adhesion of repamycin in different stent surfaces in an artificial blood circuit. 71. Jahrestagung der deutschen Gesellschaft für Kardiologie - Herz- und Kreislaufforschung, 2005 more…
  • Schratzenstaller, T., Pigerl, M., Alonso Monje, J., Eblenkamp, M., Stöver, M., Renke-Gluszko, M., Wintermantel, E.: Methode for an automatical analysis of the expansion behaviour of coronary stents. European Symposium of Vascular Biomaterials, 2005 more…

2004

  • Brunner, M., Haugen, H., Will, J., Aigner, J., Wintermantel, E.: Auswirkungen von Herstellung und Sterilisation eines porösen Polyether-urethans auf die Biokompatibilität. Die 38. Jahrestagung der DGBMT, 2004 more…
  • Deppe, H., Heinrich, A., Guder, S., Warmuth, S.: Laser Assisted three Dimensional Surface Modification of Titan Implants. Internationale Biomechanik Tage, 2004 more…
  • Eblenkamp, M., Hintermair, J., Hopfner, U., Potthoff, S., Jacobs, V.R., Aigner, J., Wintermantel, E.: The Umbilical Cord as a Source for Osteoblastic Cells. XXVI. Münchner Symposium für experimentelle Orthopädie, 2004 more…
  • Hainzlmaier, C., Mack, C., Wolf, S., Wintermantel, E.: Computational mechanics in bobsleigh: finite element model of runner and ice. The engineering of Sport 5, 2004 more…
  • Hainzlmaier, C., Wolf, S., Wintermantel, E.: Numerische Mechanik im Bobsport: Finite-Elemente-Modell einer Bobkufe. VI. Symposium der Deutschen Vereinigung für Sportwissenschaft, Sektion Biomechanik, Sportmotorik, Trainingswissenschaften, 2004 more…
  • Haugen, H., Schlicht, H., Brunner, M., Will, J., Aigner, J., Wintermantel, E.: Non-toxic injection-moulded scaffolds. 7th World Biomaterials Congress, 2004 more…
  • Pichler, A., Gilbert, I., Schubert, M., Assmann, W., Kotliar, K., Lanzl, I.: Behavior of Human Tenon Fibroblasts after Long term Low Dose Beta Irradiation. J. Ophtalmol. Res. 36, 2004 more…
  • Völlner, F., Hainzlmaier, C., Wintermantel, E.: TriboDisc - Ein Versuchsstand zur Untersuchung der Gleitpaarung Stahl-Eis im Bobsport. 4. Tagung der Deutschen Interdisziplinären Vereinigung für Sporttechnologie, 2004 more…
  • Warmuth, S., Kosmann, M., Aigner, J., Scharnweber, D., Worch, H., Wintermantel, E.: Die in vitro Zytokinexpression von Monozyten/Makrophagen im direkten Kontakt mit verschiedenen modifizierten titanimplantaten (TiAl6V4). Tagung der DMV, 2004 more…

2003

  • Aigner, J.: Stammztellen aus der Nabelschnur. Workshop der Gesellschaft für Regenerative Medizin, 2003 more…
  • Choungthong, P., Pöllmann, J., Guder, S., Bader, R., Vogel, M., Warmuth, S., Werner, E.: Mikroschädigungen von Implantatoberflächen. Biomechanik Tage, Biomaterialien 4/3, 2003 more…
  • Eblenkamp, M., Hintermair, J., Hopfner, U., Wintermantel, E., Jacobs, V.R., Strotmann, H., Aigner, J.: High plasticity of umbilical cord cells makes them a promising tool for tissue engineering. 1st world congress on regenerative medicine, International Journal of artifical Organs 26, 2003 more…
  • Hainzlmaier, C., Wintermantel, E.: Fest-Flüssig-Phasenübergang: Ein Werkstoffproblem für den Sportgerätebau. I. Kongress Junge Naturwissenschaften und Praxis, Forschungsergebnisse im Überblick, Ein Almanach junger Wisenschaftler, Hanns Martin Schleyer Stiftung, München, 2003 more…
  • Hainzlmaier, C., Wintermantel, E.: Tribologie im Stahl-Eis-Kontakt, Entwicklung einer Bobkufe. 1. tagung Modellbildung in den Naturwissenschaften, 2003 more…
  • Hainzlmaier, C., Wintermantel, E.: Bobmat- New Runners for Bobsleigh Competition. 2. Workshop Bob Bayern, 2003 more…
  • Hainzlmaier, C., Wintermantel, E.: Finite-Elemente-Modellierung einer Bobkufe im Eiskontakt. 3. deutsch-österreichisch-schweizer Workshop "Sporttechnologie zwischen Theorie und Praxis" Deutsche Interdisziplinäre Vereinigung für Sporttechnologie, 2003 more…
  • Haugen, H., Ried, V., Will, J., Wintermantel, E.: Water as foarming Agent for Open Cell Polyurethane Structures. 18th European Conference on Biomaterials, 2003 more…
  • Haugen, H., Ried, V., Will, J., Wintermantel, E.: Non-toxic processing of polyurethane scaffolds. XVIth Aachen Colloquium on Biomaterials, 2003 more…
  • Jacobs, V.R., Strotmann, H., Niemeyer, M., Schneider, K.T.M., Kiechle, M., Oostendrop, R.A.J., Peschel, C., Hönicka, M., Lehle, K., Birnbaum, D., Meyer, T., Rapp, S., Burkhart, J., Aigner, J., Eblenkamp, M. Wintermantel, E.: The STEMMAT-Project as part of the BayernAktiv Health Initiative: a milti-center project for basic research with adult stem cells from cord and coed blood. 1st World Congress on regenerative medicine, International Journal of Artificial Organs 26, 2003 more…
  • Niemeyer, M., Strotmann, H., Schneider, K.T.M., Kiechle, M., Oostendrop, R.A.J., Peschel, C., Hönicka, M., Lehle, K., Birnbaum, D., Rapp, S., Burkhart, J., Aigner, J., Eblenkamp, M., Wintermantel, E., Jacobs, V.R.: Adult stemm cell research: perspective of STEMMAT-project. 1st world congress on regenerative medicine, International Journal of Artificial Organs 26, 2003 more…
  • Warmuth, S., Bernhardt, R., Scharnweber, D., Wintermantel, E., Worch, H., Aigner, J.: Der Einfluss verschieden modifizierter titanimplantate auf das Verhalten mononuklearer Zellen. Internationale Biomechanik Tage, Biomaterialien 4/3, 2003 more…
  • Will, J., Haugen, H., Köhler, A., Hopfner, U., Aigner, J., Wintermantel, E.: Ceramic Foams as cell carrier. Bioceramics- 16th International Symposium on Ceramics in Medicine, 2003 more…

2001

  • Aigner, J.: Tissue Engineering von Knorpel für die rekonstruktive Chirurgie- Möglichkeiten und Grenzen. Tissue Engineering Marathon der Dechema, 2001 more…
  • Aigner, J., Hopfner, U., Staudenmaier, R., Naumann, A., Wintermantel, E.: Cartialage Engineering. Euroconference on Basic and applied research in Skeletal tissue engineering, 2001 more…
  • Aigner, J., Staudenmaier, R., Rotter, N., Naumann, A., Hopfner, U., Wintermantel, E.: Autologe Knorpelzüchtung-Redifferenzierungsfähigkeit nach in-vitro Expansion humaner Knorpelzellen. Internationale Biomechanik Tage, Biomaterialien 2/3, 2001 more…

Dissertations

To top