Prof. Dr.-Ing. Katrin Wudy

    Postal address

    Freisinger Landstraße 52
    85748 Garching b. München

    Phone: +49 (89) 289 - 55320
    Room: B1.2.19
    katrin.wudy@tum.de

    Publications

    2024

    • Grünewald, Jonas; Prudlik,Robin; Holla, Vijaya; Kopp, Philipp; Off, Richard; Stoll, Thomas; Kollmannsberger, Stefan; Wudy, Katrin: Generating brick-like melt pools for Laser-Based Powder Bed Fusion using flexible beam shaping: a proof of concept on bead-on-plate single tracks. Procedia CIRP, 2024 mehr… Volltext ( DOI ) Volltext (mediaTUM)
    • Setter, Robert; Wudy, Katrin: Additive manufacturing and mechanical analysis of multi-material polymer parts combining thermosets and thermoplastics. Advanced Composites and Hybrid Materials 7 (4), 2024 mehr… Volltext ( DOI )
    • Setter, Robert; Wudy, Katrin: Investigation of the bonding behavior between thermosets and thermoplastic elastomers in multi-material additive manufacturing. Polymer Testing 132, 2024, 108366 mehr… Volltext ( DOI )
    • Stoll, Thomas; Prudlik, Robin; Birg, Markus; Wudy, Katrin: Influence of different beam shapes on melt pool geometry of single melt tracks on IN718. Progress in Additive Manufacturing, 2024 mehr… Volltext ( DOI )
    • Stoll, Thomas; Schmitt, Maximilian; Lohr, Lukas; Lürbke, Robert; Müller, Alexander v; Pinomaa, Tatu; Grünewald, Jonas; Laukkanen, Anssi; Wudy, Katrin; Neu, Rudolf: Influence of laser beam shaping on the cracking behavior of tungsten at single weld lines. International Journal of Refractory Metals and Hard Materials, 2024, 106864 mehr… Volltext ( DOI )
    • Wittemer, Moritz; Wudy, Katrin: Intensity-dependent absorption signature for in situ process characterization in laser processing of 316L. The International Journal of Advanced Manufacturing Technology, 2024 mehr… Volltext ( DOI )
    • Wittemer, Moritz; Wudy, Katrin: Robustness investigation of an in-situ absorption measurement system for laser processing. Welding in the World, 2024 mehr… Volltext ( DOI )

    2023

    • Setter, Robert; Wudy, Katrin: Novel Material Combinations – The novel additive manufacturing process “Fusion Jetting” – Chapter: 8.3. In: Thermal Analysis and Rheology in Polymer Additive Manufacturing. Netzsch-Gerätebau GmbH, 2023 mehr…
    • Setter, Robert; Wudy, Katrin: Simultaneous processing of thermosets and thermoplastics in additive manufacturing of multi-material polymer parts. Annual Technical Conference – ANTEC, Conference Proceedings, 2023 mehr…
    • Birgit Vogel-Heuser, Fandi Bi, Moritz Wittemer, Jingyun Zhao, Andreas Mayr, Martin Fleischer, Theresa Prinz Anne Fischer, Jakob Trauer, Philipp Schröder, Ann-Kathrin Goldbach, Florian Rothmeyer, Markus Zimmermann, Kai-Uwe Bletzinger, Johannes Fottner, Rüdiger Daub, Klaus Bengler, André Borrmann, Michael F. Zäh, Katrin Wudy: Literature Collection of Digital Twin Definitions from Various Domains. 2023 mehr… Volltext (mediaTUM)
    • Grünewald, Jonas; Reimann, Jan; Wudy, Katrin: Influence of ring-shaped beam profiles on spatter characteristics in laser-based powder bed fusion of metals. Journal of Laser Applications 35 (4), 2023 mehr… Volltext ( DOI )
    • Grünewald, Jonas; Reinelt, Jonas; Sedlak, Holger; Wudy, Katrin: Support-free laser-based powder bed fusion of metals using pulsed exposure strategies. Progress in Additive Manufacturing, 2023 mehr… Volltext ( DOI )
    • Hofmann, Joseph; Setter, Robert; Wudy, Katrin: Powder Bed Fusion with Thermoplastic Elastomers (TPEs) – Chapter: 3.4. In: Thermal Analysis and Rheology in Polymer Additive Manufacturing. Netzsch-Gerätebau GmbH, 2023 mehr…
    • Hofmann, Joseph; Taphorn, Kirsten; Herzen, Julia; Wudy, Katrin: Einfluss einer variierenden Scanvektorenlänge auf die ortsaufgelöste Schmelzbadtemperatur und die resultierende Porosität in Bauteilen im pulverbettbasierten Schmelzen von Polyamid 12 mittels Laserstrahlung. Rapid.Tech 3D Conference 2023, 2023 mehr…
    • Hofmann, Joseph; Wudy, Katrin: Influence of the Design of Architected Cellular Structures on the Mechanical Properties in Laser-based Powder Bed Fusion of Thermoplastic Polyurethane. (Vortrag) 2023 mehr…
    • Holla, Vijaya; Kopp, Philipp; Grünewald, Jonas; Praegla, Patrick M; Meier, Christoph; Wudy, Katrin; Kollmannsberger, Stefan: Laser beam shape optimization: Exploring alternative profiles to Gaussian-shaped laser beams in powder bed fusion of metals. Solid Freeform Fabrication 2023: Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2023 mehr… Volltext ( DOI ) Volltext (mediaTUM)
    • Holla, Vijaya; Kopp, Philipp; Grünewald, Jonas; Wudy, Katrin; Kollmannsberger, Stefan: Laser beam shape optimization in powder bed fusion of metals. Additive Manufacturing 72, 2023, 103609 mehr… Volltext ( DOI )
    • Setter, Robert; Wudy, Katrin: Challenges of processing of acrylate-based photopolymers at high temperatures – Chapter 5.6. In: Thermal Analysis and Rheology in Polymer Additive Manufacturing. Netzsch-Gerätebau GmbH, 2023 mehr…
    • Setter, Robert; Hafenecker, Jan; Rothfelder, Richard; Kopp, Sebastian-Paul; Roth, Stephan; Schmidt, Michael; Merklein, Marion; Wudy, Katrin: Innovative Process Strategies in Powder-Based Multi-Material Additive Manufacturing. Journal of Manufacturing and Materials Processing 7 (4), 2023, 133 mehr… Volltext ( DOI )
    • Setter, Robert; Schmölzer, Stefan; Rudolph, Natalie; Moukhina, Elena; Wudy, Katrin: Modeling of the curing kinetics of acrylate photopolymers for additive manufacturing. Polymer Engineering & Science, 2023 mehr… Volltext ( DOI )
    • Setter, Robert; Schmölzer, Stefan; Rudolph, Natalie; Moukhina, Elena; Wudy, Katrin: Thermal stability and curing behavior of acrylate photopolymers for additive manufacturing. Polymer Engineering & Science, 2023 mehr… Volltext ( DOI )
    • Wittemer, Moritz; Grünewald, Jonas; Wudy, Katrin: Absorbance measurement for in situ process regime identification in laser processing. The International Journal of Advanced Manufacturing Technology, 2023 mehr… Volltext ( DOI )
    • Wudy, Katrin; Sapishchuk, Svitlana; Hofmann, Joseph; Schmidt, Jochen; Konwitschny, Fabian; Töpper, Hans‐Christoph; Daub, Ruediger: Polymer‐based separator for all‐solid‐state batteries produced by additive manufacturing. Journal of Applied Polymer Science, 2023 mehr… Volltext ( DOI )

    2022

    • Grünewald, Jonas; Blickle, Valentin; Allenberg-Rabe, Matthias; Wagenblast, Philipp; Wudy, Katrin: Flexible and highly dynamic beam shaping for Laser-Based Powder Bed Fusion of metals. Procedia CIRP 111, 2022, 65-70 mehr… Volltext ( DOI )
    • Hofmann, Joseph; Wudy, Katrin: Correction to: In situ process monitoring in laser‑based powder bed fusion of polyamide 12 using thermal imaging. The International Journal of Advanced Manufacturing Technology 123 (5-6), 2022, 2157-2157 mehr… Volltext ( DOI )
    • Weiss, Tony; Kick, Michael; Grabmann, Sophie; Geiger, Christian; Mayr, Lukas; Wudy, Katrin; Zaeh, Michael F.: A holistic approach for an intelligent laser beam welding architecture using machine learning for the welding of metallic bipolar plates for polymer electrolyte membrane fuel cells. Procedia CIRP 111, 2022, 810-815 mehr… Volltext ( DOI )
    • Wittemer, Moritz; Wimmer, Andreas; Wudy, Katrin: In-Situ Analysis of Laser Welding by Temporally and Spatially Mapped Radiation Reflection Measurements. IIW2022-International Conference on Welding and Joining, 2022 mehr…
    • Wudy, Katrin; Stoll, Thomas: Strahlformung eröffnet neue Perspektiven im Metall-3-D-Druck. maschinenbau 2 (6), 2022, 8-11 mehr… Volltext ( DOI )

    2021

    • Bachmann, Joel; Obst, Philip; Knorr, Lukas; Schmölzer, Stefan; Fruhmann, Gabriele; Witt, Gerd; Osswald, Tim; Wudy, Katrin; Hinrichsen, Olaf: Cavity vat photopolymerisation for additive manufacturing of polymer-composite 3D objects. Communications Materials 2 (1), 2021 mehr… Volltext ( DOI )
    • Grünewald, Jonas; Clarkson, Pirmin; Salveson, Ryan; Fey, Georg; Wudy, Katrin: Influence of Pulsed Exposure Strategies on Overhang Structures in Powder Bed Fusion of Ti6Al4V Using Laser Beam. Metals 11 (7), 2021 mehr… Volltext ( DOI ) Volltext (mediaTUM)
    • Grünewald, Jonas; Gehringer, Florian; Schmöller, Maximilian; Wudy, Katrin: Influence of Ring-Shaped Beam Profiles on Process Stability and Productivity in Laser-Based Powder Bed Fusion of AISI 316L. Metals 11 (12), 2021, 1989 mehr… Volltext ( DOI )
    • Setter, Robert; Riedel, Florentin; Peukert, Wolfgang; Schmidt, Jochen; Wudy, Katrin: Infiltration behavior of liquid thermosets in thermoplastic powders for additive manufacturing of polymer composite parts in a combined powder bed fusion process. Polymer Composites, 2021 mehr… Volltext ( DOI )
    • Setter, Robert; Stichel, Thomas; Schuffenhauer, Thomas; Kopp, Sebastian-Paul; Roth, Stephan; Wudy, Katrin: Additive Manufacturing of Multi-material Polymer Parts Within the Collaborative Research Center 814. In: Lecture Notes in Mechanical Engineering. Springer International Publishing, 2021 mehr… Volltext ( DOI )
    • Setter, Robert; Wudy, Katrin: Infiltrationsverhalten von reaktiven Flüssigkeiten zur Verwendung im Fusion Jetting (FJ) von Multi-Material-Bauteilen. (Vortrag) 2021 mehr…
    • Wimmer, Andreas; Hofstaetter, Fabian; Jugert, Constantin; Wudy, Katrin; Zaeh, Michael F.: In situ alloying: investigation of the melt pool stability during powder bed fusion of metals using a laser beam in a novel experimental set-up. Progress in Additive Manufacturing, 2021 mehr… Volltext ( DOI )

    2020

    • Heinl, M; Greiner, S; Wudy, K; Pobel, C; Rasch, M; Huber, F; Papke, T; Merklein, M; Schmidt, M; Körner, C; Drummer, D; Hausotte, T: Measuring procedures for surface evaluation of additively manufactured powder bed-based polymer and metal parts. Measurement Science and Technology 31 (9), 2020, 095202 mehr… Volltext ( DOI )
    • Knorr, Lukas; Setter, Robert; Rietzel, Dominik; Wudy, Katrin; Osswald, Tim: Comparative Analysis of the Impact of Additively Manufactured Polymer Tools on the Fiber Configuration of Injection Molded Long-Fiber-Reinforced Thermoplastics. Journal of Composites Science 4 (3), 2020, 136 mehr… Volltext ( DOI )
    • Lanzl, Lydia; Wudy, Katrin; Drummer, Dietmar: The effect of short glass fibers on the process behavior of polyamide 12 during selective laser beam melting. Polymer Testing 83, 2020, 106313 mehr… Volltext ( DOI )
    • Schneider, Kevin; Wudy, Katrin; Drummer, Dietmar: Flame-Retardant Polyamide Powder for Laser Sintering: Powder Characterization, Processing Behavior and Component Properties. Polymers 12 (8), 2020, 1697 mehr… Volltext ( DOI )
    • Schneider, Kevin; Wudy, Katrin; Drummer, Dietmar: Flame-Retardant Polyamide Powder for Laser Sintering: Powder Characterization, Processing Behavior and Component Properties. Polymers 12 (8), 2020, 1697 mehr… Volltext ( DOI )

    2019

    • Drummer, D.; Greiner, S.; Zhao, M.; Wudy, K.: A novel approach for understanding laser sintering of polymers. Additive Manufacturing 27, 2019, 379-388 mehr… Volltext ( DOI )
    • Greiner, S.; Wudy, K.; Wörz, A.; Drummer, D.: Thermographic investigation of laser-induced temperature fields in selective laser beam melting of polymers. Optics & Laser Technology 109, 2019, 569-576 mehr… Volltext ( DOI )
    • Greiner, Sandra; Lanzl, Lydia; Wudy, Katrin; Drummer, Dietmar: A new approach for getting more homogeneous temperature fields in selective laser sintering of polymers. , Author(s), 2019 mehr… Volltext ( DOI )
    • Wudy, Katrin; Drummer, Dietmar: Aging effects of polyamide 12 in selective laser sintering: Molecular weight distribution and thermal properties. Additive Manufacturing 25, 2019, 1-9 mehr… Volltext ( DOI )
    • Wörz, A.; Wudy, K.; Drummer, D.; Heidebrecht, M.; Klein, S.: Processing LDS-Circuit Boards by Selective Laser Sintering. International Polymer Processing 34 (2), 2019, 248-254 mehr… Volltext ( DOI )
    • Wörz, Andreas; Wiedau, Livia C.; Wudy, Katrin; Wegner, Andreas; Witt, Gerd; Drummer, Dietmar: Influence of chemical postprocessing on mechanical properties of laser-sintered polyamide 12 parts. Journal of Polymer Engineering 39 (9), 2019, 830-837 mehr… Volltext ( DOI )

    2018

    • Drexler, Maximilian; Greiner, Sandra; Lexow, Matthias; Lanzl, Lydia; Wudy, Katrin; Drummer, Dietmar: Selective laser melting of polymers: influence of powder coating on mechanical part properties. Journal of Polymer Engineering 38 (7), 2018, 667-674 mehr… Volltext ( DOI )
    • Lanzl, Lydia; Wudy, Katrin; Greiner, Sandra; Drummer, Dietmar: Selective laser sintering of copper filled polyamide 12: Characterization of powder properties and process behavior. Polymer Composites 40 (5), 2018, 1801-1809 mehr… Volltext ( DOI )
    • Osmanlic, Fuad; Wudy, Katrin; Laumer, Tobias; Schmidt, Michael; Drummer, Dietmar; Körner, Carolin: Modeling of Laser Beam Absorption in a Polymer Powder Bed. Polymers 10 (7), 2018, 784 mehr… Volltext ( DOI )
    • Wudy, K.; Budde, T.: Reaction kinetics and curing behavior of epoxies for use in a combined selective laser beam melting process of polymers. Journal of Applied Polymer Science 136 (7), 2018, 46850 mehr… Volltext ( DOI )
    • Wudy, Katrin; Drexler, Maximilian; Lanzl, Lydia; Drummer, Dietmar: Analysis of time dependent thermal properties for high rates in selective laser sintering. Rapid Prototyping Journal 24 (5), 2018, 894-900 mehr… Volltext ( DOI )
    • Wudy, Katrin; Drummer, Dietmar: Infiltration Behavior of Thermosets for Use in a Combined Selective Laser Sintering Process of Polymers. JOM 71 (3), 2018, 920-927 mehr… Volltext ( DOI )
    • Wudy, Katrin; Greiner, Sandra; Zhao, Meng; Drummer, Dietmar: Selective laser beam melting of polymers: In situ and offline measurements for process adapted thermal characterization. Procedia CIRP 74, 2018, 238-243 mehr… Volltext ( DOI )
    • Zhao, Meng; Wudy, Katrin; Drummer, Dietmar: Crystallization Kinetics of Polyamide 12 during Selective Laser Sintering. Polymers 10 (2), 2018, 168 mehr… Volltext ( DOI )

    2017

    • Greiner, Sandra; Wudy, Katrin; Lanzl, Lydia; Drummer, Dietmar: Selective laser sintering of polymer blends: Bulk properties and process behavior. Polymer Testing 64, 2017, 136-144 mehr… Volltext ( DOI )
    • Wudy, K.; Hinze, M.; Ranft, F.; Drummer, D.; Schwieger, W.: Selective laser sintering of zeolite filled polypropylene composites: Processing and properties of bulk adsorbents. Journal of Materials Processing Technology 246, 2017, 136-143 mehr… Volltext ( DOI )
    • Wörz, Andreas; Wudy, Katrin; Drummer, Dietmar; Wegner, Andreas; Witt, Gerd: Comparison of long-term properties of laser sintered and injection molded polyamide 12 parts. Journal of Polymer Engineering 38 (6), 2017, 573-582 mehr… Volltext ( DOI )

    2016

    • Lanzl, Lydia; Wudy, Katrin; Drexler, Maximilian; Drummer, Dietmar: Laser-high-speed-DSC: Process-oriented Thermal Analysis of PA 12 in Selective Laser Sintering. Physics Procedia 83, 2016, 981-990 mehr… Volltext ( DOI )
    • Schmidt, Jochen; Sachs, Marius; Zhao, Meng; Fanselow, Stephanie; Wudy, Katrin; Drexler, Maximilian; Drummer, Dietmar; Wirth, Karl-Ernst; Peukert, Wolfgang: A novel process for production of spherical PBT powders and their processing behavior during laser beam melting. , AIP Publishing LLC, 2016 mehr… Volltext ( DOI )
    • Wudy, Katrin; Lanzl, Lydia; Drummer, Dietmar: Selective Laser Sintering of Filled Polymer Systems: Bulk Properties and Laser Beam Material Interaction. Physics Procedia 83, 2016, 991-1002 mehr… Volltext ( DOI )

    2015

    • Drummer, Dietmar; Drexler, Maximilian; Wudy, Katrin: Density of Laser Molten Polymer Parts as Function of Powder Coating Process during Additive Manufacturing. Procedia Engineering 102, 2015, 1908-1917 mehr… Volltext ( DOI )
    • Drummer, Dietmar; Drexler, Maximilian; Wudy, Katrin: Derivation of heating rate dependent exposure strategies for the selective laser melting of thermoplastic polymers. , AIP Publishing LLC, 2015 mehr… Volltext ( DOI )
    • Drummer, Dietmar; Medina-Hernández, Martha; Drexler, Maximilian; Wudy, Katrin: Polymer Powder Production for Laser Melting Through Immiscible Blends. Procedia Engineering 102, 2015, 1918-1925 mehr… Volltext ( DOI )
    • Laumer, Tobias; Wudy, Katrin; Drexler, Maximilian; Amend, Philipp; Roth, Stephan; Drummer, Dietmar; Schmidt, Michael: Editor Note: “Fundamental investigation of laser beam melting of polymers for additive manufacture” [J. Laser Appl. 26, 042003 (2014)]. Journal of Laser Applications 27 (S1), 2015, S16001 mehr… Volltext ( DOI )

    2014

    • Drummer, Dietmar; Drexler, Maximilian; Wudy, Katrin: Impact of Heating Rate During Exposure of Laser Molten Parts on the Processing Window of PA12 Powder. Physics Procedia 56, 2014, 184-192 mehr… Volltext ( DOI )
    • Drummer, Dietmar; Wudy, Katrin; Drexler, Maximilian: Influence of Energy Input on Degradation Behavior of Plastic Components Manufactured by Selective Laser Melting. Physics Procedia 56, 2014, 176-183 mehr… Volltext ( DOI )
    • Drummer, Dietmar; Wudy, Katrin; Drexler, Maximilian: Influence of Energy Input on Degradation Behavior of Plastic Components Manufactured by Selective Laser Melting. Physics Procedia 56, 2014, 176-183 mehr… Volltext ( DOI )
    • Laumer, Tobias; Wudy, Katrin; Drexler, Maximilian; Amend, Philipp; Roth, Stephan; Drummer, Dietmar; Schmidt, Michael: Fundamental investigation of laser beam melting of polymers for additive manufacture. Journal of Laser Applications 26 (4), 2014, 042003 mehr… Volltext ( DOI )
    • Wudy, K.; Drummer, D.; Drexler, M.: Characterization of polymer materials and powders for selective laser melting. , American Institute of Physics, 2014 mehr… Volltext ( DOI )
    • Wudy, K.; Drummer, D.; Kühnlein, F.; Drexler, M.: Influence of degradation behavior of polyamide 12 powders in laser sintering process on produced parts. , American Institute of Physics, 2014 mehr… Volltext ( DOI )

    2012

    • Drummer, Dietmar; Wudy, Katrin; Kühnlein, Florian; Drexler, Maximilian: Polymer Blends for Selective Laser Sintering: Material and Process Requirements. Physics Procedia 39, 2012, 509-517 mehr… Volltext ( DOI )