Publikationen

Special Issues

2019: Residual Stresses in Production Technology, Production Engineering, Springer, Volume 3, No.2, April 2019

2021: Forming Induced Residual Stresses - Experiment, Modelling, Simulation, Archive of Applied Mechanics, Springer, Volume 91, Issue 8, August 2021

2021: Eigenspannungen bei umformtechnisch hergestellten Produkten, Forschung im Ingenieurwesen, Springer, Volume 85, Issue 3, September 2021

Konferenzbeiträge

Hoche, H. , Jäger, F. , Franceschi, A. , Oechsner, M., Groche, P.: Formation of residual stresses in austenitic stainless steels by infeed and recess rotary swaging. ICTP 2021, preprint DOI: 10.31224/osf.io/6uks7

Jobst A, Merklein M: Influence of material delivery condition on residual stresses and part properties during forward rod extrusion. In: Daehn et al (Eds): Forming the Future: Proceedings of the 13th International Conference on the Technology of Plasticity ICTP, 2021

Behrens, B.-A., Schröder, J., Brands, D., Wester, H., Uebing, S., Kock, C.: Experimental and numerical investigations on the development and stability of residual stresses arising from hot forming processes. 13th ICTP 2021, (accepted)

Uebing, S., Brands, D., Scheunemann, L., Kock, C., Wester, H., Behrens, B.-A., Schröder, J. Residual Stresses in Hot Bulk Formed Parts – A Phenomenological Approach for the Austenite-to-Martensite Phase Transformation. 13th ICTP, 2021, (accepted)

S. Walzer, N. Simon, M. Liewald, and J. Gibmeier: Local creation of uniform residual stresses into sheet met-al components by means of multiple one-sided embossing. 13th ICTP 2021 (accepted)

Pavliuchenko, P., Teller, M., Hirt, G., Analysis of influencing factors on the achievability of bistable fully closed shells by semi-analytical modelling, 13th ICTP, 2021, preprint doi.org/10.31224/osf.io/wyzx2

Charni, D.; Ishkina, S.; Epp, J.; Herrmann, M.; Schenck, C.; Kuhfuß, B.: Complementary methods for assessment of residual stress fields induced by rotary swaging of steel bars. 13th ICTP 2021,(accepted).

Hajavifard, R. (V.); Afzal, M. J.; Möhring, K.; Buhl, J.; Walther, F.: Characterisation of phase transformation and induced residual stresses in incrementally formed disc springs - an experimental and numerical study.
4. Symposium Materialtechnik des Clausthaler Zentrums für Materialtechnik, Web-Konferenz, 25.-26. Febr. 2021.

Seiler, Martha; Kästner, Markus: Parameter study on a phase-field model for fatigue fracture . PAMM 20, 2021. doi:10.1002/pamm.202000280.

Kühne, David; Fiedler, Melanie; Kästner, Markus: Extension of the local strain approach to transient material behavior and residual stresses. PAMM 20, 2021. doi:10.1002/pamm.202000311.

Bösing, I.; Ortmann-Ishkina, S.; Herrmann, M.; Schenck, S.; Kuhfuß, B.; Baune, M.: Control of corrosion features by forming parameters. ESAFORM 2021, 14 - 16 APRIL, 2021, LIEGE, DOI: 10.25518/esaform21.1464

Martha Seiler: Phase-field modelling of fatigue crack growth under residual stresses. 2021. WCCM. Paris.

Schauerte, B., Nell, M., Leuning, N., Brimmers, T., Hameyer, K.: Adaptation and Parametrization of an Iron Loss Model for Rotating Magnetization Loci in NO electrical steel. Manuscript submitted to XXVI Symposium Electromagnetic Phenomena in Nonlinear Circuits EPNC, 2020, April 2021

Jobst A, Merklein M: Applicability of Solid Lubricant Coatings in Cold Rod Extrusion of Stainless Steels. Defect and Diffusion Forum 404, 2020, 95-100. doi:10.4028/www.scientific.net/DDF.404.95

Afzal, M. J., Maqbool, F., Hajavifard, R., Buhl, J., Walther, F. & Bambach, M. Modeling the residual stresses induced in the metastable austenitic stainless steel disc springs manufactured by incremental sheet forming by a combined hardening model with phase transformation. Proceeding Manufacturing 47, 3rd International Conference on Material Forming, 2020, 1410-1415. doi:10.1016/j.promfg.2020.04.300

Ishkina, S.; Schenck, C.; Herrmann, M.; Kuhfuß, B.: Visualization of Axial Material Flow by Eccentric Thread Swaging. Procedia Manufacturing, 2020, 47, 1339–1344. DOI: 10.1016/j.promfg.2020.04.255

Hajavifard, R., M., Maqbool, F., Bambach, M. & Walther, F.: Experimental and numerical studies on the use of incremental sheet forming to improve the austenitic disc spring characteristics through tailoring their microstructure and residual stress properties. Proceedings IRF2020: 7th International Conference Integrity-Reliability-Failure., Inegi-Feup, 2020, 247-258.

Uebing, S.; Brands, D.; Scheunemann, L.; Schröder, J. A numerical study of the effect of phase evolution on residual stresses during cooling. 91st GAMM, 2020, Proc. Appl. Math. Mech., 20: e202000236. doi:10.1002/pamm.202000236

D. Müller, J. Stahl, I. Pätzold, R. Golle, T. Tobie, W. Volk and K. Stahl, Influence of Shear Cutting Process Parameters on the Residual Stress State and the Fatigue Strength of Gears, ICTP 2020, preprint doi:10.31224/osf.io/t4wbq

Behrens, B.-A., Brunotte, K., Wester, H., Kock, C. Experimental Investigations on the Interactions between the Process Parameters of Hot Forming and the Resulting Residual Stresses in the Component. The 18th International Conference on Metal Forming, 2020, Procedia Manufacturing 50, p.706-712. doi:10.1016/j.promfg.2020.08.127

Stahl, J.; Müller, D.; Pätzold, I.; Golle, R.; Tobie, T.; Volk, W.; Stahl, K.: The Infuence of Residual Stresses Induced by Near-Net-Shape Blanking Processes on the Fatigue Behavior under Bending Loads. IDDRG, 05.07.2019, DOI:10.1088/1757-899X/651/1/012086

Maaß, F.; Hahn, M.; Dobecki, M.; Poeche, A.; Reimers, W.; Tekkaya, A. E.: Influence of Tool Path Strategies on the Residual Stress Development in Single Point Incremental Forming. Proceedings of the 19th International Conference on Sheet Metal, SHEMET19, 15-17 April 2019, Leuven Belgium. DOI:10.1016/j.promfg.2019.02.105.

A. Franceschi, H. Hoche, M. Kaffenberger, M. Oechsner, P. Groche, Effects of a counter-punch system for cold full-forward extrusion, NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes, Portsmouth, New Hampshire, USA, June 23-27

Maaß, F., Dobecki, M., Hahn, M., Reimers, W., Tekkaya, A. E., Setting Component Properties in Incremental Forming. Contributed Papers from Material Science and Technology 2019, MS&T19, Portland, USA,

Maaß, F., Hahn, M., Dobecki, M., Reimers, W., Tekkaya, A. E., Single Point Incremental Forming: Relation between Forming Mechanisms and Residual Stresses for Different Path Strategies and Geometries, 15th International Conference on Computational Plasticity, COMPLAS, 3.-5. September 2019, Barcelona, Spanien.

Uebing, S.; Scheunemann, L.; Brands, D.; Schröder, J. Numerical thermo-elasto-plastic analysis of residual stresses on different scales during cooling of hot forming parts. XV International Conference on Computational Plasticity. Fundamentals and Applications, COMPLAS 2019.

Behrens, B.-A.; Chugreev, A.; Kock, C. 2019. Macroscopic FE-Simulation of Residual Stresses in Thermo-Mechanically Processed Steels Considering Phase Transformation Effects. XV International Conference on Computational Plasticity. Fundamentals and Applications, COMPLAS 2019

Ishkina, S., Liu, Y., Herrmann, M. Schenck, C., Kuhfuss, B.: FEM Simulation of process fluctuations during rotary swaging of tubes,15th International Conference on Computational Plasticity, COMPLAS, 3.-5. September 2019, Barcelona, Spanien

D. Müller, T. Tobie and K. Stahl: Calculation of sub-surface-initiated fatigue fractures in gears. 15th International Conference on Computational Plasticity, COMPLAS, 3.-5. September 2019, Barcelona, Spanien

Seiler, M.: Phase-field modelling of fatigue crack initiation and propagation under residual stresses.15th International Conference on Computational Plasticity, COMPLAS, 3.-5. September 2019, Barcelona, Spanien

Landkammer P, Steinmann P: Plastic dislocation and incompatibility density as indicators for residual stresses. COMPLAS XV: Proceedings of the XV International Conference on Computational Plasticity: fundamentals and applications, pp. 201-210. CIMNE, 2019.

Maaß, F., Hahn, M., Dobecki, M., Reimers, W., Tekkaya, A. E., Improvement of Product Properties by Selective Induction of Residual Stresses in Single Point Incremental Forming, 12. Forming Technology Forum, 19./20. September 2019, Herrsching am Ammersee.

Dobecki, M., Maaß, F., Hahn, M.,  Reimers, W. und Tekkaya, A. E.: Einfluss umforminduzierter Eigenspannungen auf die Schwingfestigkeit inkrementell umgeformter Bauteile. Arbeitsgemeinschaft Wärmebehandlung + Werkstofftechnik e. V. - Fachausschuss Eigenspannungen, Herbstsitzung, 05-06. November 2019 (Präsentation)

Jobst A, Kiener C, Merklein M: Investigations on Residual Stress Generation in Extruded Steel Components. Proceedings of the 9th Congress of the German Academic Association for Production Technology, 2019, 83-92.

Uebing, S.; Brands, D.; Scheunemann, L.; Sarhil, M.; Niekamp, R.; Kock, C.; Chugreev, A.; Behrens, B.-A.; Schröder, J. Numerical analysis of residual stresses on microscale and mesoscale in hot bulk forming parts under specific cooling. 90th GAMM,  Proc. Appl. Math. Mech., 2019, 19: e201900017. doi:10.1002/pamm.201900017

Seiler, Martha; Linse, Thomas; Hantschke, Peter; Kästner, Markus: Efficient phase-field modelling of fatigue crack propagation. PAMM 19, 2019, Nr. 11/2019. doi:10.1002/pamm.201900229

Uebing, S.; Brands, D.; Scheunemann, L.; Sarhil, M.; Niekamp, R.; Schröder, J. Numerical analysis of microstructural residual stresses in hot bulk forming parts under specific cooling. 26. Conference on Computer Methods in Materials Technology, KomPlasTech 2019, 115-118.

Pavliuchenko, P., Bremen, T., Hirt, G.: Herstellung selbstentfaltender metallischer Hohlprofile, 33. ASK Umformtechnik Tagungsband, 2019.

Seiler, M.: Efficient phase-field modelling of fatigue in ductile materials. GACM, Kassel, 2019

Volk, W.: Targeted Use of Forming Induced Residual Stresses in Metall Components. 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics GAMM, 2018 [mehr...]

Seiler, M.; Linse, T.; Hennig, P.; Kühne, D.;  Hantschke, P.; Kästner, M.: Phase-field modeling and simulation of fatigue crack propagation 5th GAMM Workshop on Phase-Field Modeling, Dresden, 08.02.2018

Kästner, M.; Seiler, M.: Influence of residual stresses on fatigue crack initiation and propagation – experiments and phase-field modeling. GAMM, München, 20.03.2018

Seiler, Martha; Hantschke, Peter; Brosius, Alexander; Kästner,Markus: A numerically efficient phase-field model for fatigue fracture – 1D analysis. GAMM 2018. doi:10.1002/pamm.201800207

Maqbool, Fawad; Bambach, Markus: Simulation of residual stresses and their impact on geometrical accuracy in incremental sheet metal forming, GAMM, München, 20.03.2018

Brands, D.; Chugreev, A.; Kock, C.; Niekamp, R.; Scheunemann, L.; Uebing, S.; Behrens, B.-A.; Schröder, J. On the analysis of microstructural  residual stresses in hot bulk forming parts under specific cooling. GAMM 2018, Proc. Appl. Math. Mech., 2018, 18: e201800256, doi:10.1002/pamm.201800256

Schauerte, B., Steentjes, S., Leuning, N., & Hameyer, K.: A continuous parameter-based approach to model the effect of mechanical stress on the electromagnetic hysteresis characteristic. In 2018 IEEE International Magnetics Conference (INTERMAG) (pp. 1-5). IEEE, April 2018

Maaß, F.; Gies, S.; Dobecki, M.; Brömmelhoff, K.; Reimers, W.; Tekkaya, A. E.: Analysis of residual stress state in sheet metal parts processed by Single Point Incremental Forming. AIP-Conference Proceedings. Proceedings of the 21st International ESAFORM Conference on Material Forming, 23-25 May 2018, Palermo, Italy.

Maqbool, Fawad; Hajavifard, Ramin; Walther, Frank; Bambach, Markus: Experimental investigation and finite element modelling of residual stress control in disc springs made of metastable austenitic stainless steel (MASS) using incremental sheet forming (ISF). In: AIP-Conference Proceedings. Proceedings of the 21st International ESAFORM Conference on Material Forming, 23-25 May 2018, Palermo, Italy

Dobecki, M.; Poeche; A., Maaß, F.; Hahn, M.; Reimers, W.; Tekkaya, A. E.: Influence of forming mechanisms on the residual stress state of aluminum sheet metal parts produced by Single Point Incremental Forming. European Conference on Residual Stresses (ECRS10), 11-14 September 2018, Leuven, Belgium.

Baumann, M., Graf, A., Selbmann, R., Brömmelhoff, K., Kräusel, V., Landgrebe, D., Bergmann, M.: Influence of a modified drawing process on the resulting residual stress state of cold drawn wire. MATEC web of Conferences, 5th International Conference on New Forming Technology (ICNFT 2018) 190, 2018. doi:10.1051/matecconf/201819004004

Behrens, B.-A.; Chugreev, A.; Kock, C. Experimental-numerical approach to efficient TTT-generation for simulation of phase transformations in  thermomechanical forming processes. IOP Conf. Ser.: Mater. Sci. Eng. 2018, 461 012040. doi:10.1088/1757-899X/461/1/012040

Bösing, I.; Herrmann, M.; Bobrov, I.; Thöming, J.; Kuhfuß, B.; Epp, J.; Baune, M.: The influence of microstructure deformation on the corrosion resistance of cold formed stainless steel, MATEC Web of Conferences, 190, p. 4002, 2018, doi:10.1051/matecconf/201819004002

Charni, D.; Ishkina, S.; Epp, J.; Herrmann, M.; Schenck, C.; Zoch, H.-W.; Kuhfuß, B.: Generation of residual stresses in rotary swaging process, MATEC Web of Conferences 190, 04001, 2018, doi:10.1051/matecconf/201819004001

Liu, Y.; Herrmann, M.; Schenck, C.; Kuhfuß, B.; Axial and Radial Material Flow Analysis in Infeed Rotary Swaging of Tubes, MATEC Web of Conferences 190, 04003, 2018, doi:10.1051/matecconf/201819004003

Zeitschriftenbeiträge

Gilch, I.; Neuwirth, T.; Schauerte, B.; Leuning, N.; Sebold, S.; Hameyer, K.; Schulz, M.; Volk, W.: Impact of residual stress evoked by pyramidal embossing om the magnetic material properties of non-orientated electrical steel. Archive of Applied Mechanics, 2021, doi:10.1007/s00419-021-01912-6

A. Franceschi, J. Stahl, C. Kock, R. Selbmann, S. Ortmann-Ishkina, A. Jobst, M. Merklein, B. Kuhfuß, M. Bergmann, B.-A. Behrens, W. Volk, P. Groche. Strategies for residual stress adjustment in bulk metal forming. Archive of Applied Mechanics, 2021, doi:10.1007/s00419-021-01903-7

F. Jaeger, A. Franceschi, H. Hoche, P. Groche, M. Oechsner.  Statistical analysis of the reproducibility of residual stress measurements in cold extruded parts. Archive of Applied Mechanics, 2021doi:10.1007/s00419-021-01953-x   

Maqbool, F., Maaß, F., Buhl, J., Hahn, M., Hajavifard, R., Walther, F., Tekkaya, A.E., Bambach, M.:Targeted residual stress generation in single and two point incremental sheet forming (ISF). Archive of Applied Mechanics, 2021, doi:10.1007/s00419-021-01935-z.

Maaß, F., Hahn, M., Tekkaya, A.E.: Adjusting residual stresses by flexible stress superposition in incremental sheet metal forming. Archive of Applied Mechanics, 2021, doi:10.1007/s00419-021-01929-x.

Selbmann, R., Baumann, M., Dobecki, M. et al. Concept for controlled adjustment of residual stress states in semi-finished products by gradation extrusion.Archive of Applied Mechanics, 2021, doi:10.1007/s00419-021-01937-x

Floros D, Jobst A, Kergaßner A, Merklein M, Steinmann P: Towards an Holistic Account on Residual Stresses in Full-forward Extruded Rods. Archive of Applied Mechanics, 2021. doi:10.1007/s00419-021-01917-1

Seiler, Martha; Keller, Sören; Kashaev, Nikolai; Klusemann, Benjamin; Kästner, Markus: Phase-field modelling for fatigue crack growth under laser-shock-peening-induced residual stresses. Archive of Applied Mechanics, 2021. doi:10.1007/s00419-021-01897-2

Kühne, D. et al., Consideration of cyclic hardening and residual stresses in fatigue life calculations with the Local Strain Approach. Archive of Applied Mechanics, 2021 (akzeptiert)

D. Müller, J. Stahl,  A. Nürnberger, R. Golle, T. Tobie, W. Volk and K. Stahl: Shear Cutting Induced Residual Stresses in Involute Gears and Resulting Tooth Root Bending Strength of a Fineblanked Gear. Archive of Applied Mechanics, 2021, doi:10.1007/s00419-021-01915-3

Uebing, S., Brands, D., Scheunemann, L., Schröder, J.: Residual stresses in hot bulk formed parts: two-scale approach for austenite-to-martensite phase transformation. Archive of Applied Mechanics, 2021, doi:10.1007/s00419-020-01836-7

Uebing, S., Brands, D., Scheunemann, L., Schröder, J. Residual stresses in hot bulk formed parts: microscopic stress analysis for austenite-to-martensite phase transformation. Archive of Applied Mechanics, 2021, doi:10.1007/s00419-021-01921-5

Behrens, B.-A., Brunotte, K., Wester, H., Kock, C. Targeted adjustment of residual stresses in hot-formed components by means of process design based on finite-element-simulation, Archive of Applied Mechanics, 2021, doi:10.1007/s00419-021-01928-y

Maassen, S.F., Erdle, H., Pulvermacher, S., Brands, D., Böhlke, T., Gibmeier, J., Schröder, J. Numerical characterization of residual stresses in a four-point-bending experiment of textured duplex stainless steel. Archive of Applied Mechanics, 2021, doi:10.1007/s00419-021-01931-3

Pavliuchenko, P., Hirt, G., Teller, M.: Analysis and manufacturing of bistable metallic profiles, Archive of Applied Mechanics, 2021, doi:10.1007/s00419-021-01916-2

M. Krause and T. Böhlke: Stochastic Evaluation of Stress and Strain Distributions in Duplex Steel. Archive of Applied Mechanics, 2021. doi:10.1007/s00419-021-01925-1

Ortmann-Ishkina, S.; Charni, D.; Herrmann, M.; Liu, Y.; Epp, J.; Schenck, C.; Kuhfuß, B.: Development of residual stresses by infeed rotary swaging of steel tubes. Archive of Applied Mechanics, 2021. doi:10.1007/s00419-021-01905-5

Guilleaume, C.; Brosius, A.: Cross-rolling process for manufacturing lightweight hybrid components. Journal of Advanced Joining Processes, 2021. doi:10.1016/j.jajp.2021.100063

Guilleaume, C.; Kühne, D.; Kästner, M.; Brosius, A.: Eigenspannungsorientiertes Fügen von hybriden Bauteilen mittels Radial-Walzen. Forschung im Ingenieurwesen, 2021. doi:10.1007/s10010-021-00486-7

F. Jaeger, A. Franceschi, H. Hoche, P. Groche, M. Oechsner. Optimierung des Eigenspannungszustands kaltfließgepresster austenitischer Stähle durch einen kontrollierten Ausstoßvorgang. Forschung im Ingenieurwesen, Springer,  2021, doi:10.1007/s10010-021-00483-w

Maaß, F., Dobecki, M., Hahn, M., Reimers, W., Tekkaya, A.E., Gezielte Steuerung der Bauteileigenspannungen durch inkrementelle Blechumformung. Forschung im Ingenieurwesen, 2021, doi:10.1007/s10010-021-00485-8.

Afzal, M. J., Hajavifard, R., Buhl, J., Walther, F. & Bambach, M.: Influence of process parameters on the residual stress state and properties in disc springs made by incremental sheet forming (ISF). Forschung im Ingenieurwesen, 2021, DOI: 10.1007/s10010-021-00491-w

D. Müller, J. Stahl, A. Nürnberger, R. Golle, T. Tobie, W. Volk and K. Stahl: Einfluss von prozessinduzierten Eigenspannungen auf die Zahnfußtragfähigkeit schergeschnittener Zahnräder. Forschung im Ingenieurwesen (accepted)

Behrens, B.-A., Schröder, J., Brands, D., Brunotte, K., Wester, H., Scheunemann, L., Uebing, S., Kock, C. Numerische Prozessauslegung zur gezielten Eigenspannungseinstellung in warmmassivumgeformten Bauteilen unter Berücksichtigung von Makro- und Mikroskala, Forschung im Ingenieurwesen, 2021, doi:10.1007/s10010-021-00482-x

Pavliuchenko, P., Teller, M., Hirt, G.: Voruntersuchungen zur Einsetzbarkeit des Walzprofilierens zur Herstellung bistabiler dünner Bleche, Forschung im Ingenieurwesen, 2021, doi:10.1007/s10010-021-00488-5

Charni, D.; Ortmann-Ishkina, S.; Herrmann, M.; Schenck, C.; Epp, J.: Mechanical properties of rotary swaged steel components. Forschung im Ingenieurwesen, 2021, (accepted)

P. Groche, A. Franceschi, Residual stress evolution in partial and full forming processes. CIRP Annals 2021, Vol. 70/1, doi:10.1016/j.cirp.2021.03.003

Baumann, M.; Selbmann, R.; Milbrandt, M.; Kräusel, V.; Bergmann, M.: Adjusting the Residual Stress State in Wire Drawing Products via In-Process Modification of Tool Geometries. Materials 2021, 14, 2157. doi:10.3390/ma14092157

Reddy B D, Steinmann P, Kergaßner A: A thermodynamically consistent theory of stress-gradient plasticity. J Mech Phys Solids 147, 2021, 104266. doi:10.1016/j.jmps.2020.104266

Dobecki, M., Poeche,  A.  and Reimers, W.:  Spatially Resolved Forming Mechanisms Detection in Single Point Incremental Forming Using Synchrotron Based Texture Analysis. Metallurgical and Materials Transactions A, 2021, 1-14. doi:10.1007/s11661-021-06261-1

J. Stahl, D. Müller, A. Nürnberger, T. Gress,  P. Lechner R. Golle, T. Tobie, W. Volk and K. Stahl: On the Formation of Residual Stresses in Blanks Manufactured by Near-Net-Shape-Blanking Processes. The International Journal of Advanced Manufacturing Technology (accepted)

Behrens, B.-A., Gibmeier, J., Brunotte, K., Wester, H., Simon, N., Kock, C.: Investigations of residual stresses within hot bulk formed components using FE simulation and contour method. Metals, 2021, doi:10.3390/met11040566

S. Walzer, M. Liewald, N. Simon, J. Gibmeier, H. Erdle, and T. Böhlke: Improvement of sheet metal properties by inducing residual stresses into sheet metal components by embossing & reforming. Applied Science and Engineering Progress, 2021 (accepted)

Liu, Y.; Liu, J.; Herrmann, M.; Schenck, C.; Kuhfuß, B.: Material Flow in Infeed Rotary Swaging of Tubes. Materials, 2021, 14 (1) doi:10.3390/ma14010058

J. Stahl, D. Müller, I. van den Bosch, L. Kindsmüller, R. Golle, T. Tobie, W. Volk and K. Stahl: The frictional force between slug and die in shear cutting after material separation. Key Engineering Materials 2021 (accepted). doi:10.4028/www.scientific.net/KEM.883.285

 

Neuwirth, T.; Walfort, B.; Sebold, S.; Schulz, M.: Light Yield Response of neutron Scintillation Screens to Sudden Flux Changes. Journal of Imaging, 2020, 6. doi.org/10.3390/jimaging6120134

Schauerte, B; Leuning, N; Vogt, S; Moll, I; Weiss, H; Neuwirth, T; Schulz, M; Volk, W; Hameyer, K: The influence of residual stress on flux-barriers of non-oriented electrical steel. Journal of Magnetism and Magnetic Materials 504, 2020. doi:10.1016/j.jmmm.2020.166659

Neuwirth, T; Backs, A; Gustschin, A; Vogt, S; Pfeiffer, F; Böni, P; Schulz, M: A high visibility Talbot-Lau neutron grating interferometer to investigate stress-induced magnetic degradation in electrical steel. Scientific Reports, 2020, 10, 1764. doi.org/10.1038/s41598-020-58504-7

Brosius, A.; Guilleaume, C.: New cross-rolling process for joining of hybrid components. CIRP Annals 69(1):245-248 (2020). https://doi.org/10.1016/j.cirp.2020.04.034

A. Franceschi, F. Jäger., H. Hoche, M. Kaffenberger, M. Oechsner and P. Groche: Calibration Of The Residual Stresses With An Active Die During The Ejection Phase Of Cold Extrusion. Journal of Material Forming, 2020, https://doi.org/10.1007/s12289-020-01572-x

Maaß, F., Hahn, M., Tekkaya, A. E.: Interaction of Process Parameters, Forming Mechanisms, and Residual Stresses in Single Point Incremental Forming. Metals, 2020, 10 (5), DOI: 10.3390/met10050656.

Seiler, Martha; Linse, Thomas; Hantschke, Peter; Kästner, Markus: An efficient phase-field model for fatigue fracture in ductile materials. Engineering Fracture Mechanics 224 2020, Nr. 02/2020. doi:10.1016/j.engfracmech.2019.106807.

N. Simon, M. Krause, P. Heinemann, H. Erdle, T. Böhlke, and J. Gibmeier: Phase-specific strain hardening and load partitioning of cold rolled duplex stainless steel X2CrNiN23-4. Crystals, vol. 10, no. 11, 2020. doi:10.3390/cryst10110976

J. Hofinger, H. Erdle, and T. Böhlke: Prediction of residual stresses of second kind in deep drawing using an incremental two-scale material model. Philosophical Magazine. vol. 100, no. 22, pp. 2836–2856, 2020. doi:10.1080/14786435.2020.1798533

M. Krause and T. Böhlke: Maximum-Entropy Based Estimates of Stress and Strain in Thermoelastic Random Heterogeneous Materials. Journal of Elasticity. vol. 141, no. 2, pp. 321–348, 2020. doi:10.1007/s10659-020-09786-5

 

Hajavifard, Ramin; Maqbool, Fawad; Schmiedt-Kalenborn, Anke; Buhl, Johannes; Bambach, Markus; Walther, Frank: Integrated Forming and Surface Engineering of Disc Springs by Inducing Residual Stresses by Incremental Sheet Forming. Materials, 2019, 12(10), 1646. doi.org/10.3390/ma12101646

Ishkina, S.; Charni, D.; Herrmann, M.; Yang, L.; Epp, J.; Schenck, C.; Kuhfuß, B.; Zoch, H.W.: Influence of process fluctuations on residual stress evolution in rotary swaging of steel tubes, Materials, 12(6), 855, 2019, doi:10.3390/ma12060855

Maqbool, Fawad; Bambach, Markus: Experimental and Numerical Investigation of the Influence of Process Parameters in Incremental Sheet Metal Forming on Residual Stresses. Journal of Manufacturing and Materials Processing, 2019, 3 (2), p. 31. doi:10.3390/jmmp3020031

Schauerte, B., Steentjes, S., Thul, A., Hameyer, K.: Iron-loss model for arbitrary magnetization loci in NO electrical steel. International Journal of Applied Electromagnetics and Mechanics, 2019, 61(S1), S89-S96. DOI: 10.3233/JAE-191599

Guilleaume, C.; Brosius, A.: Simulation methods for skew rolling. Procedia Manufacturing 27, 1-6 (2019).  doi:10.1016/j.promfg.2018.12.035

H. Hoche, A. Franceschi, M. Oechsner, P. Groche: Enhancement of the residual stresses of cold full-forward extruded parts by application of an active counter punch. Materials Science and Engineering Technology 50, 2019, 6, S. 669-681. doi:10.1002/mawe.201900050

A. Franceschi, P. Groche, Verzugsarme Kaltmassivumformung, wt online, 2019,109 (10), S. 740-744

Steinmann P, Kergaßner A, Landkammer P, Zbib H.: A novel continuum approach to gradient plasticity based on the complementing concepts of dislocation and disequilibrium densities. J Mech Phys Solids 132, 2019, doi:10.1016/j.jmps.2019.103680

Behrens, B.-A.; Schröder, J.; Brands, D.; Scheunemann, L.; Niekamp, R.; Chugreev, A.; Sarhil, M.; Uebing, S.; Kock, C. Experimental and Numerical Investigations on the Development of Residual Stresses in Thermo-Mechanically Processed Cr-Alloyed steel 1.3505. Metals Vol. 9(4), pp. 480 (28 pages), 2019, doi:10.3390/met9040480

Pavliuchenko, P., Teller, M., Grüber, M., Hirt, G., A semianalytical model for the determination of bistability and curvature of metallic cylindrical shells. Journal of Manufacturing and Materials Processing 3, 22, 2019, doi:10.3390/jmmp3010022

Liu, Y.; Herrmann, M.; Schenck, C.; Kuhfuß, B.; Plastic Deformation Components in Mandrel Free Infeed Rotary Swaging of Tubes, Procedia Manufacturing, 27, p. 33-38, 2019, doi:10.1016/j.promfg.2018.12.040

Gustschin, A.; Neuwirth, T.; Backs, A.; Schulz, M.; Pfeiffer, F.: Fabrication of gadolinium particle-based absorption gratings for neutron grating interferometry. Review of Scientific Instruments, 2018, 89, 103702. doi.org/10.1063/1.5047055

Schauerte, B., Steentjes, S., & Hameyer, K.: Flexible extension of hysteresis models for magnetic anisotropy. IEEE Magnetics Letters, 2018, 9, 1-4. https://doi.org/10.1109/LMAG.2018.2874168

 

Pressemitteilungen