Prof. Dr.-Ing. Matthias Golle

Wissenschaftlicher Mitarbeiter

Telefon:   +49 (0)89 / 289 - 14553
E-Mail:    matthias.golle@utg.de
Raum:     1402

Forschungs- und Arbeitsschwerpunkte

  • Prokurist der eug mbH
  • Koordination verschiedener Forschungsprojekte
  • Stiftungsprofessur für Stanztechnik an der Hochschule Pforzheim

Veröffentlichungen

2023

  • Tröber, Philipp; Hackl, Alfred; Leitner, Harald; Welm, Markus; Demmel, Peter; Golle, Matthias; Volk, Wolfram: On the Sensitivity of a Tool–Workpiece Thermocouple to Chemical Composition and Microstructure. steel research international, 2023, 2200456 mehr…

2015

  • Mackensen, A.; Golle, M.; Golle, R.; Hoffmann, H.: Force reduction during blanking operations of AHSS sheet materials. In: Tekkaya, A. E.; Homberg, W.; Brosius, A. (Hrsg.): 60 Excellent inventions in metal forming. Springer, 2015, 205-210 mehr…

2012

  • Nothhaft, K.; Krinninger, M.; Golle, M.; Volk, W.: Tool wear for shear cutting of ultra high strength steels according to different tool materials and tool geometries. 9th International Tooling Conference, 2012 mehr…
  • Nothhaft, Katrin; Suh, Joungsik; Golle, Matthias; Picas, Ingrid; Casellas, Daniel; Volk, Wolfram: Shear cutting of press hardened steel: influence of punch chamfer on process forces, tool stresses and sheared edge qualities. Production Engineering - Research and Development 6 (4-5), 2012, 413-420 mehr…
  • Ostermair, Martin; Golle, Matthias; Krinninger, Michael; Nürnberg, Gerald; Volk, Wolfram: Forming and Shearing of Magnesium. 1st German-Korean Workshop, 2012 mehr…

2011

  • Hirsch, M.; Krönauer, B.; Golle, R.; Hoffmann, H.; Golle, M.; Jesner, G.: Innovative Tools and Tool Steels for the Blanking of Press-Hardened Ultra High-Strength Manganese-Boron Steels. International Conference on Advances in Materials and Processing Technologies (AMPT) / Advances in Materials and Processing Technologies II (Advanced Materials Research), TRANS TECH PUBLICATIONS LTD, 201126.10.2009-29.10.2009, 123-128 mehr…
  • Yang, Z.; Golle, M.; Hoffmann, H.: Production of individualised sheet metal parts using incremental shrinking. Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011, 2011, 1120-1125 mehr…
  • Yang, Z; Scherer, D.; Golle, M.; Hoffmann, H.: Geometrical modeling of the sheet metal parts in the incremental shrinking process. 14th International Conference on Sheet Metal, SheMet 2011, 2011, 509-515 mehr…

2010

  • Krönauer, B.; Hirsch, M.; Golle, R.; Hoffmann, H.; Golle, M.; Jesner, G.: Beschneiden von pressgehärteten Blechen - Ultrahochfestes 22MnB5-Blech im Scherschneidprozess. Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF) (01-02/2010), 2010, 26-30 mehr…
  • Krönauer, B.; Hirsch, M.; Golle, R.; Hoffmann, H.; Golle, M.; Jesner, G.; Pelloso, G.; Baron, L.; Hermann, M.: Further Results in Blanking Form-Hardened Ultra High Strength Manganese-Boron-Steels with Innovative Tools and Tool Steels. 50th anniversary conference 2010 IDDRG, 201031.05.2010-02.06.2010 Graz mehr…
  • Krönauer, B.; Majic, N.; Golle, M.; Hoffmann, H.; Albers, A.: Automated bead design considering production constraints. 10th International Conference on Numerical Methods in Industrial Forming Processes Dedicated to Professor O. C. Zienkiewicz (1921-2009), NUMIFORM 2010;, 2010, 1247-1255 mehr…
  • Mackensen, A.; Golle, M.; Golle, R.; Hoffmann, H.: Experimental investigation of the cutting force reduction during the blanking operation of AHSS sheet materials. CIRP Annals - Manufacturing Technology 59 (1), 2010, 283-286 mehr…
  • Prexl, A.; Golle, M.; Hoffmann, H.; Kudraß, S.; Wahl, M.: Experimental and numerical investigation of forming and springback behavior and the resulting effects on industrial application on a structural part in mass production. International Conference on Advances in Materials and Processing Technologies, AMPT2010, 2010, 365-370 mehr…
  • Scherer, D.; Yang, Z.; Vogt, S.; Golle, M: Intelligent Driving – An Incremental Forming Method – for Customized Sheet Metal Products. 7th CIRP Intelligent Computation In Manufacturing Engineering (ICME), 2010 mehr…

2009

  • Kim, J.; Hoffmann, H.; Golle, M.; Golle, R.: Untersuchung zum Werkstoffverhalten von sehr dünnen Kupferblechen. DFG-Abschlusskolloquium SPP 1138 Prozessskalierung, BIAS Verlag, 200911.02.2009-12.02.2009, 267-286 mehr…
  • Mackensen, A.; Golle, M.; Golle, R.; Hoffmann, H.: Determination of the Hole Expansion Properties of AHSS using an Optical 3D Deformation System. IDDRG Proceedings, 200901.06.2009-03.06.2009, 547-558 mehr…
  • Nürnberg, Gerald; Ostermair, Martin; Golle, Matthias; Hoffmann, Hartmut;: The Automotive Process Chain for Forming Magnesium Parts. 66th Annual World Magnesium Conference Proceedings, 200931.05.2009-02.06.2009, 126-136 mehr…
  • Scherer, D.; Hoffmann, H.; Lohmann, B.; Lueth, T. C.; Golle, M.; Weber, S.; Markert, M.; Yang, Z.: Driving as an Innovative Manufacturing Method for Individualized Sheet Metal Products. IDDRG 2009 Proceedings, 200901.06.2009-03.06.2009, 889-901 mehr…

2008

  • Braedel, M.; Palaniswamy, H.; Golle, M.; Hoffmann, H.; Altan, T.; Griesbach, B.: Investigation of Die Tryout Using Programmable Multipoint Cushion System for Stamping Large Automotive Body Panels. Proceedings of 9th International Conference of Technology in Plasticity (ITCP) 2008, 200807.09.2008-11.09.2008 mehr…
  • Ersoy-Nürnberg, Kivilcim; Nürnberg, Gerald; Golle, Matthias; Hoffmann, Hartmut: Simulation of wear on sheet metal forming tools—An energy approach. WEAR 265 (11-12), 2008, 1801-1807 mehr…
  • Faass, I.; Palaniswamy, H.; Hoffmann, H.; Altan, T.; Golle, M.; Griesbach, B.: Effect of spacers on the material flow for process control in automotive stamping. 9th International Conference on Technology of Plasticity, ICTP 2008, 2008, 1711-1716 mehr…
  • Nürnberg, G.; Ostermair, M.; Golle, M.; Hoffmann, H.: Forming of Magnesium. 16th Magnesium Automotive an User Seminar, EFM, Aalen, 2008, 200818.09.2008-19.09.2008 mehr…
  • Scherer, D.; Hoffmann, H.; Lohmann, B.; Lueth, T.C.; Golle, M.; Weber, S.: Driving as a flexible manufacturing method for individualized sheet metal products. 9th International Conference on Technology of Plasticity, ICTP 2008, 2008, 273-278 mehr…

2007

  • Ersoy, K.; Golle, M.; Hoffmann, H.: Verschleißprognose von Werkzeugsegmenten aus alternativen Werkstoffen. 3D-Erfahrungsforum - Innovation im Werkzeug- und Formenbau, Herbert Utz Verlag, 200730.05.2007-31.05.2007 mehr…
  • Hoffmann, H.; Lohmann, B.; Lueth, T. C.; Golle, M.; Weber, S.; Scherer, D.; Markert, M.; Yang, Z.: Driving as a Flexible Innovative Manufacturing Method for Individualized Sheet Metal Products. IDDRG 2007, 200721.05.2007-23.05.2007 mehr…
  • Hoffmann, Hartmut; Zäh, Michael F.; Faaß, Ingo; Mork, Roland; Golle, Matthias; Griesbach, Bernd; Kerschner, Matthias: Automatic Process Control in Press Shops. 12th International Conference on Sheet Metal (SheMet 2007) / Sheet Metal 2007 / International Conference of Technology in Plasticity ICTP 2008 (Key Engineering Materials), TRANS TECH PUBLICATIONS LTD, 2007SheMet: 01.04.2007-04.04.2007 / ICTP: 07.09.2008-11.09.2008, 881-888 mehr…

2006

  • Ersoy, K.; Herrmann, G.; Nürnberg, G.; Golle, M.: Enhancing the Wear Simulation of Sheet Metal Forming Processes with Variable Wear Coefficients. Drawing the things to come: trends and advances in sheet metal forming; IDDRG Proceedings, 200619.06.2006-21.06.2006, 635-642 mehr…
  • Ersoy, K; Herrmann, G.; Nuernberg, G.; Golle, M.: Verbesserung der Verschleißsimulation in der Blechumformung mit hubanzahlabhängigen Verschleißkoeffizienten. gddrg, 2006 mehr…
  • Hein, C; Golle, M.: Industrielle metallische Klettverbindung. Tagungsband 8. Münchener Kolloquium, Herbert Utz Verlag, 200609.03.2006-10.03.2006 mehr…

2001

  • Golle, M.; Semmler, S.; Hoffmann, H.: Der Einfluss des Vorformens auf schwach konturierte Bauteile. Kolloquium „Wirkmedien-Blechumformung“ an der Universität Dortmund, 2001, 63-77 mehr…

2000

  • Golle, Matthias; Hoffmann, Hartmut; Schnupp, Konrad; Stümke, Artur: The Innovative Control Technology for a New Hydroforming Press Concept. SAE Technical Paper, 2000, http://papers.sae.org/2000-01-2673/ mehr…