Publikationen

Die Erkenntnisse aus Forschung und Praxis, welche am Lehrstuhl für Produktentwicklung und Leichtbau entstehen, werden regelmäßig veröffentlicht, um den Autausch mit nationalen und internationalen Forschern und Industrievertretern zu intensivieren.

Ausgewählte Publikationen

Decomposition and optimization of linear structures using meta models

Optimizing Component Solution Spaces for Systems Design

Computing solution spaces for robust design

Kostengünstig Entwickeln und Konstruieren

Konzeptentwicklung und Gestaltung technischer Produkte

Methodische Entwicklung technischer Produkte

Suche
Kein Ergebnis

Hinweis: Die „Schnellsuche“ findet nur Text in den angezeigten Feldern; nicht in Abstracts oder Schlagwörtern. Der Suchbegriff muss mindestens 3 Buchstaben lang sein.

2022

  • A. Vazhapilli Sureshbabu , N. M. Martins Pacheco, L. I. Duran Noy and M. Zimmermann: Design of an Autonomous Trash-Picking Service Robot Focussed on Human-Robot Interaction. Proceedings of the Design Society, Cambridge University Press (CUP) , 2022 mehr…
  • Buker, T.; Endress, F.; Miehling, J.; Wartzack, S.: The Interplay of Subjective Quality Evaluation, Prototyping Technologies and the User's Technology Acceptance. Proceedings of the Design Society , Cambridge University Press (CUP) , 2022, 2077-2086 mehr…
  • Endress, F.; Kipouros, T.; Buker, T.; Wartzack, S.; Clarkson, P. J.: The Value of Information in Clustering Dense Matrices: When and How to Make Use of Information. Proceedings of the Design Society, Cambridge University Press (CUP) , 2022, 703-712 mehr…
  • Franz, M.; Pfingstl, S.; Zimmermann, M.; Wartzack, S.: Estimation of Composite Laminate Ply Angles Using an Inverse Bayesian Approach Based on Surrogate Models. Design 2022, Cambridge University Press (CUP) , 2022 mehr…
  • J. Stumpf , J. G. Cóndor López , T. Naumann and M. Zimmermann: Systems Design Using Solution-Compensation Spaces with Built-In Tolerance Applied to Powertrain Integration. Design 2022, 2022 mehr…
  • Krischer, L.; Vazhapilli Sureshbabu, A.; Zimmermann, M.: Active-Learning Combined with Topology Optimization for Top-Down Design of Multi-Component Systems. Proceedings of the Design Society, Cambridge University Press (CUP), 2022, 1629-1638 mehr…
  • Martins Pacheco, N. M.; Vazhapilli Sureshbabu, A.; Dieckmann, E.; Apud Bell, M.; Green, S.; Childs, P.; Zimmermann, M.: Challenges and Opportunities in Remote Prototyping: A Case-Study during COVID-19. Design 2022, 2022 mehr…
  • Pfingstl, Simon; Braun, Christian; Zimmermann, Markus: Warped Gaussian Processes for Prognostic Health Monitoring. Structural Health Monitoring 2021: Enabling Next-generation SHM for Cyber-Physical Systems, 2022International Workshop on Structural Health Monitoring, 1049-1055 mehr…
  • Pfingstl, Simon; Tusch, Olaf; Zimmermann, Markus: Comparison of Error Measures and Machine Learning Methods for Strain-Based Structural Health Monitoring. Structural Health Monitoring 2021: Enabling Next-generation SHM for Cyber-Physical Systems, 2022International Workshop on Structural Health Monitoring, 460-467 mehr…
  • Pfingstl, Simon; Zimmermann, Markus: On integrating prior knowledge into Gaussian processes for prognostic health monitoring. Mechanical Systems and Signal Processing (171), 2022, 108917 mehr…
  • Rieser, Jasper; Zimmermann, Markus: Topology optimization of periodically arranged components using shared design domains. Structural and Multidisciplinary Optimization 65 (1), 2022 mehr…
  • S. Rötzer , V. Berger and M. Zimmermann: Cost Optimization of Product Families Using Solution Spaces: Application to Early-Stage Electric Vehicle Design. Design 2022 , Cambridge University Press (CUP) , 2022 mehr…
  • Schweigert-Recksiek, Sebastian; Trauer, Jakob; Wilberg, Julian; Stöhr, Bernd; Mahlau, Louis; Saygin, Murat; Spreitzer, Karsten; Engel, Carsten; Mörtl, Markus; Zimmermann, Markus: Einführung eines digitalen Zwillings in die technische Produktentwicklung – Ein Leitfaden für die industrielle Praxis - 3. überarbeitete Auflage. , Hrsg.: Lehrstuhl für Produktentwicklung und Leichtbau: Viessmann Werke Allendorf GmbH, Lehrstuhl für Produktentwicklung und Leichtbau (Garching, Deutschland) , 2022, mehr…
  • Trauer, Jakob; Schweigert-Recksiek, Sebastian; Schenk, Tim; Baudisch, Thomas; Mörtl, Markus; Zimmermann, Markus: A Digital Twin Trust Framework for Industrial Application. INTERNATIONAL DESIGN CONFERENCE – DESIGN 2022, Cambridge University Press, 2022, 293 - 302 mehr…
  • Xu, Duo; Häußler, Michael; Zimmermann, Markus: Computing Component Requirements for Multiple Connected Transfer Paths of Structural Borne Noise. The 2022 Leuven Conference on Noise and Vibration Engineering, 2022 mehr…
  • Zimmermann, Markus; de Weck, Olivier: Formulating Engineering Systems Requirements. In: Handbook of Engineering Systems Design. Springer International Publishing, 2022 mehr…

2021

  • Stowe, Harold (Mike); Browning, Tyson R.; Eppinger, Steven D.; Trauer, Jakob: DS 112: Proceedings of the 23rd International DSM Conference (DSM 2021). . The Design Society, 2021 mehr…
  • Hansen, Camilla Arndt; Martins Pacheco, Nuno Miguel; Özkil, Ali Gürcan; Zimmermann, Markus: WHAT IS SUCCESSFUL PROTOTYPING? INSIGHTS FROM NOVICE DESIGNERS’ SELF-EVALUATION OF PROTOTYPING SUCCESS. Proceedings of the Design Society: Design in Motion, Cambridge University Press, 2021 mehr…
  • Harbrecht, Helmut; Tröndle, Dennis; Zimmermann, Markus: Approximating solution spaces as a product of polygons. Structural and Multidisciplinary Optimization, 2021 mehr…
  • Krischer, Lukas; Zimmermann, Markus: Decomposition and optimization of linear structures using meta models. Structural and Multidisciplinary Optimization, 2021 mehr…
  • Martins Pacheco, Nuno Miguel; Vazhapilli Sureshbabu, Anand; Nürnberger, Masaru Charles; Durán Noy, Laura Isabel; Zimmermann, Markus: A FUZZY FRONT-END PRODUCT DEVELOPMENT FRAMEWORK FOR START-UPS. Proceedings of the Design Society: Design in Motion, Cambridge University Press, 2021 mehr…
  • Martins Pacheco, Nuno Miguel; Vazhapilli Sureshbabu, Anand; Zimmermann, Markus: A Role-Based Prototyping Approach for Human-Centered Design in Industry. In: Design for Tomorrow—Volume 2. Springer Singapore, 2021, 931-943 mehr…
  • Schweigert-Recksiek, Sebastian; Hagenow, Niklas; Lindemann, Udo: Evaluation of Improvement Opportunities for the Collaboration of Design and Simulation - An Industrial Multi-Method Study. Proceedings of the International Conference on Engineering Design (ICED21), Design Society, 2021, 1421-1430 mehr…
  • Shakirov, Eldar F.; Kattner, Niklas; Fortin, Clement; Uzhinsky, Ighor K.; Lindemann, Udo: Reducing the uncertainty in engineering change management using historical data and simulation modelling: a process twin concept. International Journal of Product Lifecycle Management 13 (1), 2021, 89 mehr…
  • Shao, Rilian; Wahle, Martin; Zimmermann, Markus: A model for the dynamic friction behaviour of rubber-like materials. Tribology International 164, 2021, 107220 mehr…
  • Simon Pfingstl, Yann Niklas Schoebel, Markus Zimmermann: Reinforcement Learning for Structural Health Monitoring based on Inspection Data. 8th Asia-Pacific Workshop on Structural Health Monitoring, Materials Research Forum LLC, 2021, 203-210 mehr…
  • Trauer, Jakob; Pfingstl, Simon; Finsterer, Markus; Zimmermann, Markus: Improving Production Efficiency with a Digital Twin Based on Anomaly Detection. Sustainability 13 (18), 2021, 10155 mehr…
  • Trauer, Jakob; Wöhr, Ferdinand; Eckert, Claudia; Kannengiesser, Udo; Sankowski, Olga; Zimmermann, MarkusKnippenberg, Sjoerd;: Criteria for Selecting Design Process Modelling Approaches. International Conference on Engineering Design, ICED21, Cambridge University Press, 2021, 791 - 800 mehr…

2020

  • Schöberl, Maximilian; Rebentisch, Eric; Trauer, Jakob; Mörtl, Markus; Fottner, Johannes: Evaluating MBSE Potential using Product and Development Characteristics – A Statistical Investigation. International Design Conference – DESIGN 2020 , 2020 mehr…
  • Behrenbeck, Jan; Martins Pacheco, Nuno Miguel; Tariq, Bilal; Zimmermann, Markus: A Behavior-Centric Concept for Engineering Education in New Product Development. NordDesign , The Design Society, 2020 mehr…
  • Daub, Marco; Wöhr, Ferdinand; Zimmermann, Markus: Optimizing Distributed Design Processes for Flexibility and Cost. 22nd International Dependency and Structure Modeling Conference 2020, The Design Society , 2020 mehr…
  • Daub, Marco; Duddeck, Fabian; Zimmermann, Markus: Optimizing Component Solution Spaces for Systems Design. Structural and Multidisciplinary Optimization, 2020 mehr…
  • Duo Xu , Diana Grill, Yilun Sun, Anand Vazhapilli Sureshbabu, Martin Eser, Tim C. Lüth, Markus Zimmermann: Oberflächenmodellierung eines akustischen Metamaterials und Prototypaufbau mittels additiver Fertigung zur Geräuschreduktion. konstruktion für additive fertigung 2020, 2020 mehr…
  • Ehrlenspiel, Klaus; Kiewert, Alfons; Lindemann, Udo; Mörtl, Markus: Kostengünstig Entwickeln und Konstruieren - Kostenmanagement bei der integrierten Produktentwicklung. Springer Berlin Heidelberg (8. Auflage. Aufl.), 2020 mehr…
  • Hansen, Camilla Arndt; Jensen, Lasse Skovgaard; Özkil, Ali Gürcan; Martins Pacheco, Nuno Miguel: FOSTERING PROTOTYPING MINDSETS IN NOVICE DESIGNERS WITH THE PROTOTYPING PLANNER. Proceedings of the Design Society: DESIGN Conference, Cambridge University Press, 2020, 1725-1734 mehr…
  • Krischer, Lukas; Sureshbabu, Anand Vazhapilli; Zimmermann, Markus: Modular Topology Optimization of a Humanoid Arm. 2020 3rd International Conference on Control and Robots (ICCR), IEEE, 2020 mehr…
  • Kundla, Martin; Schramm, Dieter; Zimmermann, Markus; Justen, Nils; Scheirl, Florian; Lindner, Tim; Till, Florian; Jeyakumar, Jaffrey Hudson Immanuel: Utilizing artificial neural networks and design solution spaces to cope with the complexity in subframe design. 11th International Munich Chassis Symposium 2020, Springer Berlin Heidelberg , 2020, 293-307 mehr…
  • Lender, Benjamin; Trauer, Jakob; Schweigert-Recksiek, Sebastian; Spreitzer, Karsten; Chmielewski, Nils; Zimmermann, Markus: A Matrix-Based Blueprint for System Architecture Design – A Case Study with an Industrial Partner. Proceedings of the 22nd International DSM Conference (DSM 2020), The Design Society, 2020, 217-226 mehr…
  • Martins Pacheco, Nuno Miguel; Behrenbeck, Jan; Tariq, Bilal; Vazhapilli Sureshbabu, Anand; Zimmermann, Markus: A Role-based Prototyping Approach for Human-Centred Design in Fuzzy Front-End Scenarios. NordDesign 2020, The Design Society, 2020 Lyngby, Denmark, 12th - 14th August 2020, 1-12 mehr…
  • Pfingstl, Simon; Steiner, Martin; Tusch, Olaf; Zimmermann, Markus: Crack Detection Zones: Computation and Validation. Sensors (20(9)), 2020 mehr…
  • Rötzer, S.; Thoma, D.; Zimmermann, M.: COST OPTIMIZATION OF PRODUCT FAMILIES USING SOLUTION SPACES. Proceedings of the Design Society: DESIGN Conference, Cambridge University Press (CUP), 2020, 1087-1094 mehr…
  • Rötzer, Sebastian; Rostan, Nicky; Steger, Hans; Vogel-Heuser, Birgit; Zimmermann, Markus: Sequencing of Information in Modular Model-based Systems Design. 22nd International Dependency and Structure Modelling Conference (DSM 2020), 2020 mehr…
  • Schweigert-Recksiek, S.; Lindemann, U.: CHOOSING THE RIGHT MEASURES TO IMPROVE COLLABORATION BETWEEN DESIGN AND SIMULATION DEPARTMENTS. Proceedings of the Design Society: DESIGN Conference 1, 2020, 727-736 mehr…
  • Schweigert-Recksiek, Sebastian; Trauer, Jakob; Engel, Carsten; Spreitzer, Karsten; Zimmermann, Markus: Conception of a Digital Twin in Mechanical Engineering - A Case Study in Technical Product Development. INTERNATIONAL DESIGN CONFERENCE – DESIGN 2020, 2020, 383-392 mehr…
  • Schweigert-Recksiek, Sebastian; Idrissov, Agzam; Bharadwaj, Tilak; Lindemann, Udo: Graph-Based Collaboration Analysis of an Agile Medical Engineering Project with Structural Metrics. 22nd International DSM Conference (DSM 2020), The Design Society, 2020 mehr…
  • Schöberl, Maximilian; Rebentisch, Eric; Trauer, Jakob; Mörtl, Markus; Fottner, Johannes: Evaluating MBSE Potential using Product and Development Characteristics – A Statistical Investigation. International Design Conference – DESIGN 2020, 2020Dubrovnik, Croatia, 2385-2394 mehr…
  • Stumpf, Julian; Naumann, Thomas; Vogt, Marc Eric; Duddeck, Fabian; Zimmermann, Markus: On the Treatment of Equality Constraints in Mechanical Systems Design Subject to Uncertainty. NordDesign 2020, The Design Society, 2020 mehr…
  • Trauer, Jakob; Schweigert-Recksiek, Sebastian; Engel, Carsten; Spreitzer, Karsten; Zimmermann, Markus: What is a Digital Twin? - Definitions and Insights from an Industrial Case Study in Technical Product Development. INTERNATIONAL DESIGN CONFERENCE – DESIGN 2020, 2020, 757-766 mehr…
  • Trauer, Jakob; Schweigert-Recksiek, Sebastian; Gövert, Kristin; Mörtl, Markus; Lindemann, Udo: Combining Agile Approaches and Risk Management for Mechatronic Product Development - A Case Study. INTERNATIONAL DESIGN CONFERENCE – DESIGN 2020, 2020, 767-776 mehr…
  • Trauer, Jakob; Schweigert-Recksiek, Sebastian; Onuma Okamoto, Luis; Spreitzer, Karsten; Mörtl, Markus; Zimmermann, Markus: Data-Driven Engineering – Definitions and Insights from an Industrial Case Study for a New Approach in Technical Product Development. NordDESIGN 2020, 2020 mehr…
  • Vogel-Heuser, Birgit; Zimmermann, Markus; Stahl, Karsten; Land, Kathrin; Ocker, Felix; Rötzer, Sebastian; Landler, Stefan; Otto, Michael: Current Challenges in the Design of Drives for Robot-Like Systems. IEEE International Conference on Systems, Man, and Cybernetics (IEEE SMC 2020), 2020 mehr…
  • Wilberg, Julian Malte Maximilian: From data to value: facilitating strategy development for connected products. Dissertation, 2020 mehr…
  • Wöhr, Ferdinand; Königs, Simon; Ring, Philipp; Zimmermann, Markus: A Role-Activity-Product Model to Simulate Distributed Design Processes. 22nd International Dependency and Structure Modeling Conference 2020, The Design Society , 2020 mehr…
  • Wöhr, Ferdinand; Stanglmeier, Max; Königs, Simon; Zimmermann, Markus: Simulation of Gradient-Based Individual Design Behaviour in Distributed Development Processes. International Design Conference 2020 , 2020, 1579-1588 mehr…

2019

  • D. Saad, S. Rötzer, M. Zimmermann: Set-based Design in Agile Development: Developing a Banana Sorting Module – A Practical Approach. IEEM 2019, 2019 mehr…
  • Funk, Matthias; Jautze, Marcus; Strohe, Manfred; Zimmermann, Markus: Sequential Updating of Quantitative Requirements for Increased Flexibility in Robust Systems Design. International Conference on Engineering Design, 2019, 3531-3540 mehr…
  • Gerber, Carlos; Goevert, Kristin; Schweigert-Recksiek, Sebastian; Lindemann, Udo: Agile development of physical products – A case study of medical device product development. Research into Design for a Connected World, Springer Nature Singapore, 2019 mehr…
  • Goevert, Kristin; Brombeiss, Maximilian; Lindemann, Udo: Integration of mechatronic product development methods in an agile development area. Research into Design for a Connected World, Springer Nature Singapore, 2019 mehr…
  • Goevert, Kristin; Heimicke, Jonas; Lindemann, Udo; Albers, Albert: Interview Study on the Agile Development of Mechatronic Systems. International Conference on Engineering Design , Cambridge University Press (CUP) , 2019 mehr…
  • Goevert, Kristin; Schweigert-Recksiek, Sebastian; Tariq, Bilal; Krischer, Lukas; Lindemann Udo: AGILE DEVELOPMENT OF A MICROTITER PLATE IN AN INTERDISCIPLINARY PROJECT TEAM. Proceedings of the 22nd International Conference on Engineering Design (ICED19), Cambridge University Press, 2019, 2139-2148 mehr…
  • Harbrecht, Helmut; Tröndle, Dennis; Zimmermann, Markus: A sampling-based optimization algorithm for solution spaces with pair-wise-coupled design variables. Structural and Multidisciplinary Optimization 60 (2), 2019, 501-512 mehr…
  • Hashemi Farzaneh, Helena; Angele, Ferdinand; Zimmermann, Markus: Bio-Inspired Design for Additive Manufacturing - Case Study: Microtiter Plate. Proceedings of the Design Society: International Conference on Engineering Design , Cambridge University Press (CUP) , 2019, 289-298 mehr…
  • Hashemi Farzaneh, Helena; Neuner, Lorenz: Usability Evaluation of Software Tools for Engineering Design. Proceedings of the Design Society: International Conference on Engineering Design, Cambridge University Press (CUP), 2019, 1303-1312 mehr…
  • Hashemi Farzaneh, Helena; Lindemann, Udo: A Practical Guide to Bio-inspired Design. Springer Berlin Heidelberg, 2019 mehr…
  • Jan-Dominik Korus, Philipp Karg, Pilar Garcia Ramos, Christoph Schütz, Markus Zimmermann, Steffen Müller: Robust Design of a Complex, Perturbed Lateral Control System for Automated Driving. the 10th IFAC Symposium on Intelligent Autonomous Vehicles, 2019 mehr…
  • Karamooz Mahdiabadi, Morteza; Bartl, Andreas; Xu, Duo; Tiso, Paolo; Rixen, Daniel Jean: An augmented free-interface-based modal substructuring for nonlinear structural dynamics including interface reduction. Journal of Sound and Vibration, 2019, 114915 mehr…
  • Katharina Hermann, Rafael Hostettler, Markus Zimmermann, Anand Vazhapilli Sureshbabu: A Joint-Selective Robotic Gripper with Actuation Mode Switching. IEEE 15th International Conference on Automation Science and Engineering (CASE), IEEE, 2019 mehr…
  • Kattner, N.; Hu, S.; Lindemann, U.: Defining Effort Indicators to Retrospectively Assess Engineering Change Information. 2019 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), IEEE, 2019 mehr…
  • Kattner, Niklas; Shakirov, Eldar; Lindemann, Udo: An approach to assess engineering change effort retrospectively utilizing past engineering change information. IFIP 16th International Conference on Product Lifecycle Management, 2019 mehr…
  • Kattner, Niklas; Bauer, Harald; Basirati, Mohammad R.; Zou, Minjie; Brandl, Felix; Vogel-Heuser, Birgit; Böhm, Markus; Krcmar, Helmut; Reinhart, Gunther; Lindemann, Udo: Inconsistency Management in Heterogeneous Models - An Approach for the Identification of Model Dependencies and Potential Inconsistencies. Proceedings of the Design Society: International Conference on Engineering Design, Cambridge University Press (CUP), 2019 mehr…
  • Mahl, M.; Jelich, C.; Baier, H.: On the Temperature-Dependent Non-Isosensitive Mechanical Behavior of Polyethylene in a Hydrogen Pressure Vessel. Procedia Manufacturing 30, 2019, 475-482 mehr…
  • Mahl, Martin Jakob: Untersuchung des thermo-mechanischen und kryogenen Kurz- und Langzeitverhaltens von Polyethylen für Hochdrucktanks. Dissertation, 2019 mehr…
  • Pfingstl, Simon; Zimmermann, Markus: Strain-based Structural Health Monitoring: Computing Regions for Critical Crack Detection. Structural Health Monitoring 2019, Stanford University, DEStech Publications, 2019, 132-139 mehr…
  • Schmidt, Tobias Sebastian; Behrenbeck, Jan; Burger, Kevin; Hostettler, Rafael; Paetzold, Kristin; Zimmermann, Markus: Mapping the Progress in Agile Product Development: A Multi-Case Study. Proceedings of the Design Society: International Conference on Engineering Design, Cambridge University Press (CUP), 2019ICED, 1215-1224 mehr…
  • Schweigert-Recksiek, Sebastian; ; Koch, Christian; Lindemann, Udo: Matrix-Based Multivariate Analysis of Survey Data on Potentials for the Collaboration of Design and Simulation. the 21st International DSM Conference, The Design Society, 2019, 3-13 mehr…
  • Shakirov, Eldar; Brandl, Felix J.; Bauer, Harald; Kattner, Niklas; Becerril, Lucia; Fortin, Clement; Lindemann, Udo; Reinhart, Gunther; Uzhinsky, Ighor: Integration of Engineering and Manufacturing Change Management: Infrastructure and Scenarios for Teaching and Demonstration. Procedia CIRP 81, 2019, 535-540 mehr…
  • Shao, Rilian; Wahle, Martin; Zimmermann, Markus: Modelling of the steering system and the tie rod force for the steering feel assessment in a driving simulator. 28th Aachen Colloquium Automobile and Engine Technology 2019, 2019 mehr…
  • Sureshbabu, Anand Vazhapilli; Rass, David; Zimmermann, Markus: A Lightweight Transradial Hand Prosthesis with a Variable Position Thumb and Thermoregulation. 2019 19th International Conference on Advanced Robotics (ICAR), IEEE, 2019 mehr…
  • Tran, Jintin; González Cabrero, José; Mandla, Christopher; Plattner, Markus; Zimmermann, Markus: Parametric Study on Thermal Properties of a PMSM Motor in Cryogenic Environment Using COMSOL Multiphysics®. Comsol Conference 2019 Cambridge, 2019 mehr…
  • Tran, Jintin; Stowe, Mike; Plattner, Markus; Zimmermann, Markus: Using the Design Structure Matrix for Space System Design. Proceedings of the 21st International DSM Conference, The Design Society, 2019, 179-188 mehr…
  • Vazhapilli Sureshbabu, Anand; Metta, Giorgio; Parmiggiani, Alberto: A Systematic Approach to Evaluating and Benchmarking Robotic Hands—The FFP Index. Robotics 8 (1), 2019, 7 mehr…
  • Vierlboeck, Maximilian; Gövert, Kristin; Trauer, Jakob; Lindemann, Udo: Budgeting for Agile Product Development. Proceedings of the 22nd International Conference on Engineering Design (ICED19) (ICED), Cambridge University Press, 2019, 2169-2178 mehr…

2018

  • Leardi, Carlo; Browning, Tyson R.; Eppinger, Steven D.; Becerril, Lucia: Proceedings of the 20th International Dependency and Structure Modeling (DSM) Conference. , Trieste (Italy), 15 – 17 October 2018. , 2018 mehr…
  • Achleitner, Johannes, Rohde-Brandenburger, Kai; Reinisch, Joseph; Hornung, Mirko: Numerische Optimierung am Beispiel formvariabler Flügelstrukturen. Seminarreihe Hochleistungsstrukturen im Leichtbau, 2018 mehr…
  • Basirati, M. R.; Zou, M.; Bauer, H.; Kattner, N.; Reinhart, G.; Lindemann, U.; Böhm, M.; Krcmar, H.; Vogel-Heuser, B.: Towards Systematic Inconsistency Identification for Product-Service-Systems. DESIGN 2018, 2018, 2811-2820 mehr…
  • Becerril, Lucia; Hofmann, Bastian; Reif, Julia A. M.; Kattner, Niklas; Lindemann, Udo: Challenges with Implementing Processes, Methods and Tools in R&D. The ISPIM Innovation Forum 2018, 2018 mehr…
  • Becerril, Lucia; Hollauer, Christoph, Lindemann, Udo: Assessing the Agility of Teams within Mechatronic Product Development. 2018 IEEE International Conference on Industrial Engineering and Engineering Management , 2018 16-19 December, Bangkok, Thailand mehr…
  • Becerril, Lucia; Lindemann, Udo: SIMULATION-SUPPORTED PARTICIPATIVE PROCESSES IMPROVEMENT IN ENGINEERING DESIGN. DESIGN 2018, 2018, 725-734 mehr…
  • Böhmer, Annette: When digital meets physical - Agile Innovation of Mechatronic Systems. Dissertation, 2018 mehr…
  • Domke, Marie-Luise; Hashemi Farzaneh, Helena: Research in bio-inspired design - what is its current focus? The Fifth International Conference on Design Creativity (ICDC2018), Design Society, 2018 mehr…
  • Erschen, Stefan; Duddeck, Fabian; Gerdts, Matthias; Zimmermann, Markus: On the Optimal Decomposition of High-Dimensional Solution Spaces of Complex Systems. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems 4 (2), 2018, - mehr…
  • Gebhardt, Marcel; Schmied, Christian; Seiter, Mischa; Mörtl, Markus: Aufwandsarme Quantifizierung von indirekten Änderungskosten in der Antriebstechnik. Forschungsvereinigung Antriebstechnik, FVA e.V., 2018 mehr…
  • Goevert, Kristin; Lindemann, Udo: FURTHER DEVELOPMENT OF AN AGILE TECHNIQUE TOOLBOX FOR MECHATRONIC PRODUCT DEVELOPMENT. DESIGN 2018, 2018, 2015-2026 mehr…
  • Goevert, Kristin; Lindner, Manuel; Lindemann, Udo: Survey on agile methods and processes in physical product development. THE ISPIM Innovation Forum 2018, 2018 mehr…
  • Hashemi Farzaneh, Helena; Angele, Ferdinand; Zimmermann, Markus: Bionik - Potenziale für die Konstruktion additiv gefertigter Bauteile. Workshop "Konstruktion für die Additive Fertigung", 2018 mehr…
  • Held, Maximilian; Weidmann, Dominik; Kammerl, Daniel; Hollauer, Christoph; Mörtl, Markus; Omer, Mayada; Lindemann, Udo: Current challenges for sustainable product development in the German automotive sector: A survey based status assessment. Jornal of Cleaner Production (195), 2018, 869-889 mehr…
  • Hollauer, Christoph; Kölsch, Felix; Lindemann, Udo: Supporting Workshop-based Tailoring of Product Development Processes by Metric-based Structural Analysis. 20th International Dependency and Structure Modeling Conference (DSM 2018), 2018 mehr…
  • Hollauer, Christoph; Lang, Christopher; Wilberg, Julian; Weking, Jörg; Dengler, Christian; Böhm, Markus; Krcmar, Helmut; Lohmann, Boris; Omer, Mayada: Data-Based Development of an Agent-Based Simulation to Support the Design of Bicycle-Sharing Systems. 20th International Dependency and Structure Modeling Conference (DSM 2018), 2018 mehr…
  • Hollauer, Christoph; Langner, Michael; Lindemann, Udo: Supporting tailoring of complex product development processes: An approach based on structural modelling and analysis. DESIGN 2018, 2018, 769-780 mehr…
  • Hollauer, Christoph; Rast, Julia; Lindemann, Udo: Development and Evaluation of a Workshop Concept to Support Tailoring of Complex Product Development Processes. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2018), 2018 mehr…
  • Hollauer, Christoph; Shalumov, Boris; Wilberg, Julian; Omer, Mayada: Graph databases for exploiting use phase data in Product-Service-System development: A Methodology to support implementation. DESIGN 2018, 2018, 1571-1582 mehr…
  • Hollauer, Christoph; Thomas, Robin; Rhodes, Donna H.; Lindemann, Udo: Context-oriented Modularization of Product Development Processes using Matrix-Based Clustering. 20th International Dependency and Structure Modeling Conference (DSM 2018), 2018 mehr…
  • Kattner, N.; Brandl, F.; Becerril, L.; Reinhart, G.; Lindemann, U.: Systemic Change Management – Managing Technical Changes in Products and Production Systems. INCOSE EMEASEC 2018 CONFERENCE, 2018 mehr…
  • Kattner, N.; Mehlstaeubl, J.; Becerril, L.; Lindemann, U.: Data Analysis in Engineering Change Management – Improving Collaboration by Assessing Organizational Dependencies Based on Past Engineering Change Information. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2018) , 2018 mehr…
  • Kattner, Niklas; Trepatschko, Aleksej; Assmann, Gert; Becerril, Lucia; Lindemann, Udo: Retrospective Analysis of Engineering Change Iterations - A Case Study on Reducing Engineering Changes by Defining Target Values for Engineering Design. Lecture Notes in Electrical Engineering , Springer Nature Singapore Pte Ltd. , 2018, 321 - 331 mehr…
  • Korus, Jan-Dominik; Ramos, Pilar Garcia; Schütz, Christoph; Zimmermann, Markus; Müller, Steffen: Top-down development of controllers for highly automated driving using solution spaces. 9th International Munich Chassis Symposium 2018, Springer Vieweg, 2018, - mehr…
  • Maisenbacher, Sebastian: Integrated Value Engineering – Leitfaden zur integrierten Betrachtung von Produktwerten. Dissertation, 2018 mehr…
  • Marc Hirschka, Lucia Becerril: Teaching DSM-based analysis based on a Case at a Start-Up. Proceedings of the 20th International Dependency and Structure Modeling (DSM) Conference , 2018Trieste (Italy), 15 – 17 October 2018, 227-237 mehr…
  • Münzberg, Christopher Horst Wolfgang: Krisen in der Produktentwicklung und ihre operative Bewältigung. Dissertation, 2018 mehr…
  • Nikolaus von Bary, Eric Rebentisch, Lucia Becerril: Simulation-based Value Analysis of Organizational Complexity in Product Development Projects. Proceedings of the 20th International Dependency and Structure Modeling (DSM) Conference , 2018Trieste (Italy), 15 – 17 October 2018, 35-46 mehr…
  • Piccolo, Sebastiano A.; Trauer, Jakob; Wilberg, Julian; Maier, Anja M.: Understanding task execution time in relation to the multilayer project structure: Empirical evidence. 20th International Dependency and Structure Modeling (DSM) Conference, Lehrstuhl für Produktentwicklung und Leichtbau, 2018, 129-138 mehr…
  • Plötner, Maik: Integriertes Vorgehen zur selbstindividualisierungsgerechten Produktstrukturplanung. Dissertation, 2018 mehr…
  • Schweigert-Recksiek, Sebastian; Lindemann, Udo: Improvement Opportunities for the Collaboration of Design and Simulation Departments - An Interview Study. DESIGN 2018, DESIGN Society, 2018, 905-916 mehr…
  • Sjoerd C.M. Knippenberg, Sebastian Schweigert-Recksiek, Lucia Becerril, Udo Lindemann: Analyzing Complex Socio-Technical Systems in Technical Product Development Using Structural Metrics. Proceedings of the 20th International Dependency and Structure Modeling (DSM) Conference , 2018Trieste (Italy), 15 – 17 October 2018, 203-213 mehr…
  • Tale-Yazdi, A.; Kattner, N.; Becerril, L.; Lindemann, U.: A Literature Review on Approaches for the Retrospective Utilisation of Data in Engineering Change Management. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2018) , 2018 mehr…
  • Vogt, Marc Eric; Duddeck, Fabian; Harbrecht, Helmut; Stutz, Florian; Wahle, Martin; Zimmermann, Markus: Computing solution-compensation spaces using an enhanced Fourier-Motzkin algorithm. GAMM 2018, WILEY-VCH Verlag GmbH & Co, 2018, - mehr…
  • Vogt, Marc Eric; Duddeck, Fabian; Wahle, Martin; Zimmermann, Markus: Optimizing tolerance to uncertainty in systems design with early- and late-decision variables. IMA Journal of Management Mathematics, 2018 mehr…
  • Weidmann, D.; Seibel, F.; Becerril, L.; Kattner, N.; Lehr, J.; Mörtl, M.; Lindemann, U.: Integration of Scenarios in Product-Service System development - Combining Scenarios, Use Cases and Requirements Traceability. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2018), 2018 mehr…
  • Weidmann, D.; Winkler, S.; Mörtl, M.: Integration of Scenario-Based Requirements Forecast into Model-Based Product-Service System Planning. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2018), 2018 mehr…
  • Weidmann, Dominik; Stenger, Marcel; Mörtl, Markus: Future Oriented Planning of Product-Service Systems. Lecture Notes in Electrical Engineering, Springer Nature Singapore Pte Ltd., 2018, 299-310 mehr…
  • Wilberg, Julian; Fahrmeier, Larissa; Hollauer, Christoph; Omer, Mayada: Deriving a Use Phase Data Strategy for Connected Products: A Process Model. DESIGN 2018, 2018, 1441-1452 mehr…
  • Wilberg, Julian; Kalla, Tobias; Fetscher, Manuel; Rimböck, Franz ; Hollauer, Christoph; Omer, Mayada: Development of a Use Phase Data Strategy for Connected Products: A Case Study in Industry. PICMET 2018 - Portland International Conference on Management of Engineering and Technology - Managing Technological Entrepreneurship: The Engine for Economic Growth, 2018 mehr…
  • Wilberg, Julian; Lau, Kathleen; Nützel, Thomas; Hollauer, Christoph; Omer, Mayada: Development of a use case catalogue supporting idea generation for Internet of Things use cases. DESIGN 2018, 2018 mehr…

2017

  • Vehicle, having an internal combustion engine which comprises a flexible drive. 2017, (anderer Eintrag) mehr…
  • Hölttä-Otto, Katja; Browning, Tyson; Eppinger, Steven; Becerril, Lucia : Understand, Innovate, and Manage your Complex System! , Proceedings of the 19th International DSM Conference Espoo (Finland), 11–13 September 2017. , 2017 mehr…
  • Becerril, Lucia; Knoll, Marvin; Kattner, Niklas; Lindemann, Udo: Visualizing Information Flow in Engineering Change Management Processes. Proceedings of the 19th International DSM Conference Espoo (Finland), 11–13 September 2017, 2017 mehr…
  • Schweigert, Sebastian; Çavuşoğlu, Mesut; Lindemann, Udo: Enhancing Collaboration between Design and Simulation Departments by Methods of Complexity Management. THE JOURNAL OF MODERN PROJECT MANAGEMENT (12), 2017, 62-67 mehr…
  • Achleitner, Johannes, Rohde-Brandenburger, Kai; Reinisch, Joseph; Hornung, Mirko: Forschungsaktivitäten im Bereich formvariabler Segelflugzeugflügel an der TU München. Symposium für Segelflugzeugentwicklung, 2017 mehr…
  • Becerril, Lucia; Heinrich, Veronika; Böhmer, Annette; Schweigert, Sebastian; Lindemann, Udo: Engineering Change Management within agile Product Development – A Case Study. 6th International Conference on Reseach into Design (ICoRD´17) , Springer Nature Singapore , 2017 mehr…
  • Becerril, Lucia; Hollauer, Christoph; Kattner, Niklas; Weidmann, Dominik; Lindemann, Udo: How to assess the acceptability of design support. Tag des Systems Engineering, Carl Hanser Verlag GmbH & Co. KG , 2017 mehr…
  • Becerril, Lucia; Stahlmann, Jan-Timo; Beck, Jesco; Lindemann, Udo: USABILITY OF PROCESSES IN ENGINEERING DESIGN. Proceedings of the International Conference on Engineering Design, ICED, 2017 mehr…
  • Behncke, Florian: Beschaffungsgerechte Produktentwicklung – Abstimmung von Produktarchitektur und Liefernetzwerk in frühen Phasen der Entwicklung. Dissertation, 2017 mehr…
  • Benta, Christian; Wilberg, Julian; Hollauer, Christoph; Omer, Mayada: Process model for data-driven business model generation. ICED17 21st International Conference on Engineering Design, 21-25 August, 2017, 2017, 347-356 mehr…
  • Böhmer, Annette Isabel; Grauvogl, Constantin; Schweigert, Sebastian; Becerril, Lucia; Devecka, Jakub; Bahrouni, Zièd; Lindemann, Udo: Towards Agile Development of Physical Products. 23rd ICE/IEEE ITMC, 2017, 90-97 mehr…
  • Böhmer, Annette Isabel; Hostettler, Rafael; Richter, Christoph; Lindemann, Udo; Conradt, Jörg; Knoll, Alois: Towards Agile Product Development - The Role of Prototyping. Proceedings of ICED 2017, the 21th International Conference on Engineering Design, 2017, 1-10 mehr…
  • Böhmer, Annette Isabel; Hugger, Philipp; Lindemann, Udo: Scrum within Hardware Development. 23rd ICE/IEEE ITMC, 2017, 811-819 mehr…
  • Böhmer, Annette Isabel; Kayser, Liza; Sheppard, Sheri; Lindemann, Udo: Prototyping as a thinking approach in design. 23rd ICE/IEEE ITMC, 2017, 989-997 mehr…
  • Böhmer, Annette Isabel; Kosiol, Maike; Lindemann, Udo: Agile Mechatronics – Innovation Strategy for Cross-functional Teams in the Age of Uncertainty. XXVIII ISPIM Innovation Conference, 2017, 1-16 mehr…
  • Böhmer, Annette Isabel; Meinzingr, Maximilian; Hostettler, Rafael; Knoll, Alois; Lindemann, Udo: Towards a Framework for Agile Development of Physical Products. 23rd ICE/IEEE ITMC, 2017, 251-259 mehr…
  • Carro Saavedra, Cristina; Lindemann, Udo: k-MORE - a Methodology to Manage Documented Knowledge for Reuse. 21st International Conference on Engineering Design (ICED 17), The Design Society, 2017, 151-160 mehr…
  • Carro Saavedra, Cristina; Morales Quiles, Jose; Lindemann, Udo: Characteristics of Design Situations Influencing the Knowledge to Reuse. R&D Management Conference, 2017 mehr…
  • Carro Saavedra, Cristina; Ocon Galilea, Alicia; Lindemann, Udo: Increasing Knowledge Seeking Initiation based on Theories of Human Behaviour. Design Management Academy Conference 2017, 2017 mehr…
  • Carro Saavedra, Cristina; Serrano Villodres, Teresa; Lindemann, Udo: Review and Classification of Knowledge in Engineering Design. 6th International Conference on Reseach into Design (ICoRD´17), Springer Nature Singapore, 2017 mehr…
  • Christoph Baur, Christopher Münzberg, Udo Lindemann: Designing New Concepts For Household Appliance With The Help Of TRIZ. ICED17 21st International Conference on Engineering Design, 21-25 August, 2017, 2017, 179-188 mehr…
  • Christopher Münzberg, Verena Stingl, Joana Geraldi, Josef Oehmen: Identifying Product Development Crises: The Potential of Adaptive Heursitics. ICED17 21st International Conference on Engineering Design, 21-25 August, 2017, 2017, 189-198 mehr…
  • Daniilidis, Charalampos: Planungsleitfaden für die systematische Analyse- und Verbesserung von Produktarchitekturen. Dissertation, 2017 mehr…
  • Goevert, Kristin; Baumgartner Michael; Lindemann, Udo: The Agile Toolbox - Adaption of agileMPPs to the mechatronic development process. Proceedings of the 21st International Conference on Engineering Design (ICED17), The Design Society, 2017, 129-138 mehr…
  • Gövert, Kristin; Gökdemir, Attila; Peitz, Christoph; Lindemann, Udo: Challenges of Agile Development Implementation in Mechatronic Development Processes. 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) , 2017 mehr…
  • Heimberger, Nepomuk: Strukturbasierte Koordinationsplanung in komplexen Entwicklungsprojekten. Dissertation, 2017 mehr…
  • Herberg, Arne Philipp: Planung und Entwicklung multifunktionaler Kernmodule in komplexen Systemarchitekturen und -portfolios – Methodik zur Einnahme einer konsequent modulzentrierten Perspektive. Dissertation, 2017 mehr…
  • Herbst, Lisa-Magdalena Martha Ida: Entwicklung einer Methodik zur Ableitung raumfunktionaler Kundenanforderungen in der Automobilentwicklung. Dissertation, 2017 mehr…
  • Hermanutz, A.; Hornung, M.: High Fidelity Trim Calculation Under Consideration Of Aeroelastic Effects Of A High Aspect Ratio Swept Wing. IFASD [International Forum on Aeroelasticity and Structural Dynamics], 2017 mehr…
  • Hollauer, Christoph; Becerril, Lucia; Kattner, Niklas; Weidmann, Dominik; Chucholowski, Nepomuk; Lindemann, Udo: Adaptable mechatronic engineering design processes: Process reference model and methodology. 6th International Conference on Reseach into Design (ICoRD´17) , Springer Nature Singapore , 2017 mehr…
  • Hollauer, Christoph; Frisch, Bianca; Wilberg, Julian; Omer, Mayada; Lindemann, Udo: Design of flexible product development processes - An automotive case study. ICED17 21st International Conference on Engineering Design, 21-25 August, 2017, Design Society, 2017, 289 - 298 mehr…
  • Hollauer, Christoph; Lindemann, Udo: Design process tailoring: A review and perspective on the literature. 6th International Conference on Reseach into Design (ICoRD´17) , Springer Nature Singapore , 2017 mehr…
  • Hollauer, Christoph; Pavlitzek, Gregor; Mörtl, Markus; Lindemann, Udo: Context-oriented Strategy for Modularization of Engineering Design Processes: An Automotive Case Study. 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) , 2017 mehr…
  • Hollauer, Christoph; Wilberg, Julian; Omer, Mayada; Lindemann, Udo: Context-specific process design: An integrated process lifecycle model and situations for context factor use. ICED17 21st International Conference on Engineering Design, 21-25 August, 2017, 2017, 81 - 90 mehr…
  • Hostettler, Rafael; Böhmer, Annette Isabel; Lindemann, Udo; Knoll, Alois: TAF Agile Framework. 23rd ICE/IEEE ITMC, 2017, 788-796 mehr…
  • Höhn, Manuel; Hollauer, Christoph; Wilberg, Julian; Kammerl, Daniel; Mörtl, Markus; Omer, Mayada: Investigating usage data support in development processes - A case study. ICED17 21st International Conference on Engineering Design, 21-25 August, 2017, 2017, 91 - 100 mehr…
  • Kammerl, Daniel: Modellbasierte Planung von Produkt-Service-Systemen. Dissertation, 2017 mehr…
  • Kammerl, Daniel; Echle, Stefan; Mörtl, Markus: Gathering and analysing external influences on the product design - a case study. International Conference on Engineering Design - ICED 2017, 2017 mehr…
  • Kammerl, Daniel; Zink, Roland; Hollauer, Christoph; Lindemann, Udo: A concept for assessing sustainability – The Sustainability Diamond. Research into Design for Communities, Volume 2. Proceeding of ICoRD 2017 (Smart Innovation, Systems and Technologies, Springer, 2017, 189–197 mehr…
  • Kandlbinder, Peter; Schmied, Christian; Mörtl, Markus: Kostenkalkulation mit künstlichen neuronalen Netzen. Forschungsvereinigung Antriebstechnik, FVA e.V., 2017 mehr…
  • Karamooz Mahdiabadi, Morteza; Buchmann, Erhard; Xu, Duo; Bartl, Andreas; Rixen, Daniel Jean: Dynamic Substructuring of Geometrically Nonlinear Finite Element Models Using Residual Flexibility Modes. Dynamics of Coupled Structures, Volume 4, Springer International Publishing, 215-223, 2017 mehr…
  • Kattner, Niklas; Lindemann, Udo: Performance Metrics in Engineering Change Management: Towards a Methodology to Investigate the Efficiency of Handling Engineering Changes. 2017 Proceedings of PICMET '17: Technology Management for Interconnected World, Portland International Center for Management of Engineering and Technology, 2017 mehr…
  • Kattner, Niklas; Mehlstäubl, Jan; Becerril, Lucia; Hollauer, Christoph; Weidmann, Dominik; Lindemann, Udo: A method for the expert-based identification of engineering change propagation. Proceedings of the 21st International Conference on Engineering Design (ICED17), The Design Society , 2017, 633 - 642 mehr…
  • Kohl, Markus; Wilberg, Julian; Tommelein, Iris; Pikas, Ergo; Lindemann, Udo: Modularization: Exploring opportunities for knowledge transfer between the mechanical engineering and construction industry. ICED17 21st International Conference on Engineering Design, 21-25 August, 2017, 2017, 227 - 236 mehr…
  • Kremer, Simon; Krahl, Thilo; Lindemann, Udo: User Experience Journeys. Proceedings of the 21st International Conference on Engineering Design (ICED17), The Design Society, 2017, 483-492 mehr…
  • Kremer, Simon; Schlimm, Alexander; Lindemann, Udo: The ExodUX Framework: Supporting Comprehensive User Experience Design. 2017 Proceedings of PICMET '17: Technology Management for Interconnected World, Portland International Center for Management of Engineering and Technology , 2017 mehr…
  • Lang, Alexander: Im Spannungsfeld zwischen Risiken und Chancen – Eine Methode zur Ableitung von Handlungsempfehlungen zur Öffnung der Produktentwicklung. Dissertation, 2017 mehr…
  • Lang, Alexander; du Maire, Michael; Lindemann Udo: Torn between risks and chances – What is the optimum point of openness in the R&D process? The ISPIM Innovation Forum, 2017 mehr…
  • Langer, Stefan Frederik: Kritische Änderungen in der Produktentwicklung - Analyse und Maßnahmenableitung. Dissertation, 2017 mehr…
  • Mahl, M.; Jelich, C.; Baier, H.: Thermo-mechanical behavior of polyethylene under mechanical loads at cyogenic and elevated temperatures. International Journal of Pressure Vessels and Piping (150 (2017) ), 2017, pp. 11-18 mehr…
  • Maurer, Maik: Complexity Management in Engineering Design - a Primer. Springer Vieweg, 2017 mehr…
  • Michailidou, Ioanna: Design the experience first – A scenario-based methodology for the design of complex, tangible consumer products. Dissertation, 2017 mehr…
  • Roth, Michael: Efficient Safety Method Kit for User-driven Customization. Dissertation, 2017 mehr…
  • Rozov, V.; Hermanutz, A.; Breitsamter, C.; Hornung, M.: Aeroelastic Analysis of a Flutter Demonstrator with a Very Flexible High-Aspect-Ratio Swept Wing. IFASD [International Forum on Aeroelasticity and Structural Dynamics], 2017 mehr…
  • Schmidt, Danilo Marcello: Increasing Customer Acceptance in Planning Product-Service Systems. Dissertation, 2017 mehr…
  • Schmidt, Tobias Sebastian; Böhmer, Annette Isabel; Wallisch, Anne; Patzold, Kristin; Lindemann, Udo: Media Richness Theory in Agile Development. 23rd ICE/IEEE ITMC, 2017, 537-546 mehr…
  • Schmied, Christian; Gebhardt, Marcel; Mörtl, Markus; Lindemann, Udo: Expert Based Approach to Analyse and Influence Indirect Cost of Engineering Changes. Proceedings of the 21st International Conference on Engineering Design (ICED 17) Vol 4: Design Methods and Tools, 2017, 663-672 mehr…
  • Schweigert, S. , Lindemann, U., Seitz, V., Wintermantel, E.: Methodical product development in medical engineering—A case study on radiography systems. 6th International Conference on Research into Design, ICoRD 2017 (Smart Innovation, Systems and Technologies), 2017 mehr…
  • Schweigert, Sebastian; Luft, Thomas; Wartzack, Sandro; Lindemann, Udo: Combination of Matrix-based and Graph-based Modeling for Product and Organizational Structures. Proceedings of the 19th International DSM Conference, 2017Understand, Innovate, and Manage your Complex System! mehr…
  • Schweigert, Sebastian; Marahrens, Nils-Jorge; Carro Saavedra, Cristina; Lindemann, Udo: Industrial Evaluation of a Toolkit of Methods for Engineering Knowledge Management of Simulations. Conference proceedings of the Design Management Academy, The Design Society, 2017DESIGN MANAGEMENT ACADEMY CONFERENCE 2017 - Research Perspectives on Creative Intersections, 1393-1410 mehr…
  • Schweigert, Sebastian; Schöner, Martin; Lindemann, Udo: Pattern Recognition for the Integration of Mechanical Simulations in Product Development Workflows. Proceedings of the 21st International Conference on Engineering Design (ICED17), The Design Society, 2017, 399-408 mehr…
  • Schweigert, Sebastian; Xia, Minghai; Lindemann, Udo: An Empirical Survey on Efficiency Improvement for the Collaboration Between Design and Simulation Departments. Proceedings of the 21st International Conference on Engineering Design (ICED17), The Design Society, 2017, 337-346 mehr…
  • Stahl, P.; Sendner, F.- M.; Rößler, C.; Hornung, M.; Hermanutz, A.: Mission and Aircraft Design of FLEXOP Unmanned Flying Demonstrator to Test Flutter Suppression within Visual Line of Sight. AIAA Aviation Forum, 2017 mehr…
  • Weidmann, Dominik; Becerril, Lucia; Hollauer, Christoph; Kattner, Niklas; Lindemann, Udo: A Network-Based Approach to Identify Lacking Coordination Using Higher Order Links. Proceedings of the 21st International Conference on Engineering Design (ICED17), 2017, pp. 405-414 mehr…
  • Weidmann, Dominik; Isemann, Moritz; Kandlbinder, Peter; Hollauer, Christoph; Kattner, Niklas; Becerril, Lucia; Lindemann, Udo: Product Models in Mechatronic Design. 2017 Proceedings of PICMET '17: Technology Management for Interconnected World, Portland International Center for Management of Engineering and Technology, 2017 mehr…
  • Weidmann, Dominik; Lindemann, Udo: Manage Interdisciplinarity Based on Requirements Traceability. 2017 Proceedings of PICMET '17: Technology Management for Interconnected World, Portland International Center for Management of Engineering and Technology, 2017 mehr…
  • Wickel, Martina Carolina: Änderungen besser managen – Eine datenbasierte Methodik zur Analyse technischer Änderungen. Dissertation, 2017 mehr…
  • Wilberg, Julian; Heitzer, Felix; Hollauer, Christoph; Omer, Mayada: Goal System Management for Use-Oriented Product-Service Systems. 2017 Proceedings of PICMET '17: Technology Management for Interconnected World, Portland International Center for Management of Engineering and Technology, 2017 mehr…
  • Wilberg, Julian; Schäfer, Fabian; Kandlbinder, Peter; Hollauer, Christoph; Omer, Mayada; Lindemann, Udo: Data Analytics in Product Development: Implications from Expert Interviews. 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) , 2017 mehr…
  • Wilberg, Julian; Triep, Isabell; Hollauer, Christoph; Omer, Mayada: Big Data in Product Development: Need for a Data Strategy. 2017 Proceedings of PICMET '17: Technology Management for Interconnected World, Portland International Center for Management of Engineering and Technology, 2017 mehr…
  • Zimmermann, Markus; Königs, Simon; Niemeyer, Constantin; Fender, Johannes; Zeherbauer, Christian; Vitale, Renzo; Wahle, Martin: On the design of large systems subject to uncertainty. Journal of Engineering Design 28 (4), 2017, 233-254 mehr…
  • Zink, Lukas; Böhmer, Annette Isabel; Hostettler, Rafael; Lindemann, Udo; Knoll, Alois: The use of prototypes within agile product development. 23rd ICE/IEEE ITMC, 2017, 80-89 mehr…
  • von Saucken, Constantin Christian: Entwicklerzentrierte Hilfsmittel zum Gestalten von Nutzererlebnissen. Dissertation, 2017 mehr…

2016

  • Monteiro de Carvalho, Marly; Eppinger, Steven; Maurer, Maik; Becerril, Lucia: SUSTAINABILITY IN MODERN PROJECT MANAGEMENT. , 18th International DSM Conference, São Paulo, August 29th and 30th, 2016. Journal of Modern Project Management, 2016 mehr…
  • Katsikis, Nikolaos; Lang, Alexander; Debreczeny, Csaba: Evaluation of Open Innovation in B2B from a Company Culture Perspective. Journal of Technology Management & Innovation Volume 11, Issue 3, 2016, 94 - 100 mehr…
  • Abram, Laura; Münzberg, Christopher; Lindemann, Udo: Crisis Situations in Engineering Product Development: Elaboration of Principles for effective Crisis Solving. Proceedings of NordDesign 2016 , 2016, Volume 2, p. 93 - 102 mehr…
  • Achleitner, J.; Baier, H.: CellSkin - a new flexible shell structure for a morphing wing aircraft. International Conference on Composite Structures (19th, Porto, 2016), 2016 mehr…
  • Bauer, Wolfgang: Planung und Entwicklung änderungsrobuster Plattformarchitekturen. Dissertation, 2016 mehr…
  • Becerril, Lucia; Sauer, Michael; Lindemann, Udo: Estimating the effects of Engineering Changes in early stage product development. Proceedings of the 18th International DSM Conference , USP - Sao Paulo, 2016 mehr…
  • Behncke, Florian; Maisenbacher, Sebastian; Shalumov, Boris; Kieckebusch, Martin; Koehler, Christian; Lindemann, Udo: Strategisches Produktkostenmanagement - Eine Studie der europäischen Industrie. Lehrstuhl für Produktentwicklung (50. Aufl.), 2016 mehr…
  • Bock, Julius; Wilberg, Julian; Lindemann, Udo: Supplier Integration in Product Development: a Search for Existing Approaches in other Industries. Proceedings of the DESIGN 2016 14th International Design Conference, Design Society, 2016, 1215 - 2224 mehr…
  • Brandt, Laura Sophie: Architekturgesteuerte Elektrik/Elektronik Baukastenentwicklung im Automobil. Dissertation, 2016 mehr…
  • Bruse, Florian; Böhmer, Annette Isabel; Lindemann, Udo: Cooperation between large companies and start-ups: the access to drive disruptive innovation. NordDesign 2016, 2016, 115-136 mehr…
  • Böhmer, Annette Isabel; Lindemann, Udo: Agile Innovation - Challenges while Implementing Agile Approaches within complex mechatronic processes of large corporations. ISPIM Innovation Summit 2016: Moving the Innovation Horizon Conference, 2016, 1-14 mehr…
  • Böhmer, Annette Isabel; Richter, Christoph; Hostettler, Rafael; Schneider, Philip; Plum, Ines; Böhler, Dominik; Lindemann, Udo; Conradt, Jörg; Knoll, Alois: Think.Make.Start. - An Agile Framework. Proceedings of the DESIGN 2016 14th International Design Conference , 2016, 917-926 mehr…
  • Carro Saavedra, Cristina; Marahrens, Nils-Jorge; Schweigert, Sebastian; Kestel, Philipp; Kremer, Simon; Wartzack, Sandro; Lindemann, Udo: Development of a Toolkit of Methods for Simulations in Product Development. 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2016 mehr…
  • Chucholowski, Nepomuk; Kriegler, Johannes; Hollauer, Christoph; Kattner, Niklas; Becerril, Lucia; Weidmann, Dominik; Lindemann, Udo: Systematic Partitioning in Mechatronic Product Development by Modeling Structural Dependencies. Proceedings of the 18th International DSM Conference, 2016, 57-66 mehr…
  • Chucholowski, Nepomuk; Lehmer, Katharina; Rebentisch, Eric; Lindemann, Udo: Synchronization in Product Development Projects: A Literature Study on Challenges and Practices. Proceedings of the DESIGN 2016 14th International Design Conference, 2016, 1465-1474 mehr…
  • Chucholowski, Nepomuk; Starke, Phillip; Moser, Bryan R.; Rebentisch, Eric; Lindemann, Udo: Characterizing and Measuring Activity Dependence in Engineering Projects. Proceedings of the Portland International Conference on Management of Engineering & Technology 2016, 2016 mehr…
  • Craig, Forest; Hashemi Farzaneh, Helena; Weinmann, Julian; Lindemann, Udo: Quantitative Survey and Analysis of Five Maker Spaces at Large, Research-Oriented Universities. 2016 ASEE Annual Conference & Exposition, 2016 mehr…
  • Da Rocha-Schmidt, L.; Datashvili, L.; Baier, H.: A Multistep Morphing Structures Design Approach Applied to Dfferent Types of Applications in Aerospace. AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference [57., San Diego, 2016], 2016 mehr…
  • Erschen, Stefan; Duddeck, Fabian; Zimmermann, Markus: Optimal decomposition of high dimensional solution spaces for robust design. European Congress on Computational Methods in Applied Sciences and Engineering, 2016 mehr…
  • Fender, Johannes; Duddeck, Fabian; Zimmermann, Markus: Direct computation of solution spaces. Structural and Multidisciplinary Optimization 55 (5), 2016, 1787-1796 mehr…
  • Fernandez Miguel, Rodrigo; Carro Saavedra, Cristina; Lindemann, Udo: Factors influencing knowledge application - A review from the knowledge management field. DESIGN 2016, 2016, 985-995 mehr…
  • Gebhardt, Marcel; Schmied, Christian; Mörtl, Markus: Ex-ante Quantifizierung indirekter Anderungskosten - Vorgehen zur Entwicklung heuristischer Verfahren. ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb 111 (7-8), 2016, 434-438 mehr…
  • Goevert, Kristin; Cloutier, Robert; Roth, Michael; Lindemann, Udo: Concept of System Architecture Database Analysis. 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), IEEE, 2016, 410-414 mehr…
  • Graff, Lavinia; Harbrecht, Helmut; Zimmermann, Markus: On the computation of solution spaces in high dimensions. Structural and Multidisciplinary Optimization 54 (4), 2016, 811-829 mehr…
  • Guertler, Matthias R.; Lindemann, Udo: Innovationsmanagement. In: Lindemann, Udo (Hrsg.): Handbuch Produktentwicklung. Carl Hanser Verlag, 2016, 483-511 mehr…
  • Guertler, Matthias R.; Michailidou, Ioanna; Lindemann, Udo: How to assess a company’s open innovation situation? Design Science 2 (e1), 2016, 1-30 mehr…
  • Guertler, Matthias R.; Stahl, Stephanus; Muenzberg, Christopher; Lindemann, Udo: Analysing the influence of planning-parameters on Open Innovation performance. The XXVII ISPIM Innovation Conference – Blending Tomorrow’s Innovation Vintage, 2016, 1-11 mehr…
  • Guertler, Matthias Rudolf; Becerril, Lucia; Lindemann, Udo: How to Identify Suitable Collaboration Strategies for Open Innovation? International Design Conference - DESIGN 2016, 2016, 1005-1014 mehr…
  • Guertler, Matthias Rudolf; Lindemann, Udo: Identifying Open Innovation Partners: A Methodology for Strategic Partner Selection. International Journal of Innovation Management (ijim) 20 (5), 2016, 1-20 mehr…
  • Gürtler, Matthias Rudolf: Situational Open Innovation – Enabling Boundary-Spanning Cooperation in Small and Medium-sized Enterprises. Dissertation, 2016 mehr…
  • Harnischfeger, Milan; Schatz, Markus; Baier, Horst; Mertiny, Pierre: Validation of Design Optimization Approach for Polymer Composite Piping. PVP (Pressure Vessels & Piping Conference), 2016 mehr…
  • Hashemi Farzaneh, Helena: Bio-inspired design: Ideation in collaboration between mechanical engineers and biologists. Dissertation, 2016 mehr…
  • Hashemi Farzaneh, Helena; Helms, Maria Katharina; Münzberg, Christopher; Lindemann, Udo: Technology-pull and biology-push approaches in bio-inspired design – comparing results from empirical studies on student teams. Proceedings of DESIGN 2016, the 14th International Design Conference, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb., 2016, 231-240 mehr…
  • Helms, Maria Katharina: Biologische Publikationen als Ideengeber für das Lösen technischer Probleme in der Bionik. Dissertation, 2016 mehr…
  • Helms, Maria Katharina; Hashemi Farzaneh, Helena; Lindemann, Udo: Creating Bio-inspired Solution Ideas Using Biological Research Articles. In: Corazza G., Agnoli S. (Hrsg.): Multidisciplinary Contributions to the Science of Creative Thinking. Springer (1. Aufl.), 2016, 215-232 mehr…
  • Hollauer, Christoph; Hornauer, Lennart; Lindemann, Udo: Process Maturity Models for the Development of Mechatronic Products. 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) , IEEE, 2016 mehr…
  • Hollauer, Christoph; Kattner, Niklas; Lindemann, Udo: Towards a Methodology to Support the Development of Flexible Company-Specific Engineering Design Processes. Proceedings of the Portland International Conference on Management of Engineering & Technology 2016 , Portland State University, Department of Engineering & Technology Management , 2016, 2018 - 2030 mehr…
  • Hollauer, Christoph; Riebl, Peter; Becerril, Lucia; Kattner, Niklas; Weidmann, Dominik; Chucholowski, Nepomuk; Ruhland, Karl; Amann, Karl; Lindemann, Udo: An approach for improving method and model application in engineering design processes: Case study of a German plant engineering company. 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) , IEEE, 2016 mehr…
  • Holle, Maik; Elsesser, Luisa; Schuhmacher, Matthias; Lindemann, Udo: How to Motivate External Open Innovation-Partners: Identifying Suitable Measures. PICMET Portland International Conference on Management of Engineering & Technology, Portland State University, Department of Engineering & Technology Management, 2016 mehr…
  • Holle, Maik; Straub, Immanuel; Roth, Michael; Lindemann, Udo: Customer Individual Product Development - Methodology for Product Architecture Modification. 2016 10th Annual IEEE International Systems Conference (SysCon 2016), 2016, 744-749 mehr…
  • J Wimmler, M Wahle, M Zimmermann, D Schramm: Optimizing suspension systems for feasibility, performance and cost. 13th International Symposium on Advanced Vehicle Control, 2016 mehr…
  • Kammerl, Daniel; Novak, Gabriel; Hollauer, Christoph; Mörtl, Markus: Integrating Usage Data into the Planning of Product-Service Systems. 2016 IEEE International Conference on Engineering and Engineering Management (IEEM 2016) , IEEE, 2016 mehr…
  • Kammerl, Daniel; Winkler, Stefan; Schmidt, Danilo Marcello; Mörtl, Markus: Model-based support for Product-Service System planning. 14th International Design Conference DESIGN 2016, Faculty of Mechanical Engineering and Naval Architecture, 2016 mehr…
  • Kasperek, Daniel: Structure-based System Dynamics Analysis of Engineering Design Processes. Dissertation, 2016 mehr…
  • Kattner, Niklas; Wang, Tianyi, Lindemann, Udo: Performance Metrics in Engineering Change Management – Key Performance Indicators and Engineering Change Performance Levels. 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) , IEEE, 2016, 1180 - 1184 mehr…
  • Kling, U.; Seitz, A.; Bijewitz, J.; Hermanutz, A.; da Rocha-Schmidt, L.; Scarpa, F.; Majic, F.; Efraimsson, G.; O´Reilly, C.J.: Shape Adaptive Technology for Aircraft Engine Nacelle Inlets. Aircraft Structural Design Conference [5th.], 2016 mehr…
  • Kohl, Markus; Roth, Michael; Lindemann, Udo: Safety-oriented Modular Function Deployment. Proceedings of NordDesign 2016, Design Society, 2016, 103-113 mehr…
  • Kremer, Simon; Günther, Stefan, Lindemann, Udo: Roles in User Experience Design - Transferring insights from experience oriented disciplines. Proceedings of the 10th International Conference on Design & Emotion, Celebration & Contemplation, 27-30 Sept. 2016, Amsterdam, The Design & Emotion Society, 2016, 473-482 mehr…
  • Kremer, Simon; Lindemann, Udo: Extracting Insights from Experience Designers to Enhance User Experience Design. 5th International Conference, DUXU 2016, Held as Part of HCI International 2016, Toronto, Canada, July 17–22, 2016, Proceedings, Part I, Springer International Publishing, 2016, 304-313 mehr…
  • Kremer, Simon; Münzberg, Christopher, Lindemann, Udo: Collaboration in Open Organisations. 14th International Design Conference DESIGN 2016 , 2016, 1085-1094 mehr…
  • Kremer, Simon; Sies, Tony, Lindemann, Udo: Designing Meaningful User Experiences: Interactive Learning Experience Model. 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) , IEEE, 2016, 286-290 mehr…
  • Königs, Simon; Zimmermann, Markus: NEW CHASSIS SYSTEMS AND METHODS – Resolving conflicts of goals in complex design processes – application to the design of engine mount systems. In: Proceedings. Springer Fachmedien Wiesbaden, 2016 mehr…
  • Lang, Alexander; Telkamp, Sarah; Lindemann, Udo: Lead User in Open Organizations, How a Refined Lead User Concept can help to Integrate Workshop Results. The 14th International Open and User Innovation Conference, 2016 mehr…
  • Lang, Alexander; Tesch, Anna Teresa: Opening up the R&D process is risky - how far do you have to go in order to beat your competitors? The ISPIM Innovation Summit, 2016 mehr…
  • Mahl, M.; Klaproth, T.; Baier, H.: Thermo-mechanische Untersuchungen von Hochleistungskunststoffen für kryogene Wasserstoffdrucktanks. Symposium Material Innovativ 2016, 2016 mehr…
  • Maisenbacher, Sebastian; Behncke, Florian; Roth, Michael; Fleckenstein, Franz; Roos, Reinhard: Integrated Value Engineering - Increasing the value of a forklift subsystem. 2016 IEEE International Systems Conference (SysCon 2016) Proceedings, IEEE, 2016, 916-921 mehr…
  • Maisenbacher, Sebastian; Fürtbauer, Daniel; Behncke, Florian; Lindemann, Udo: INTEGRATED VALUE ENGINEERING - IMPLEMENTATION OF VALUE OPTIMIZATION POTENTIALS. Proceedings of the DESIGN 2016 14th International Design Conference, Faculty of Mechanical Engineering and Naval Architecture, 2016, 361-370 mehr…
  • Maisenbacher, Sebastian; Goevert, Kristin; Moertl, Markus; Lindemann, Udo: Supporting Product Platform Decisions with Lifecycle Costing. 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) , IEEE , 2016, 1325-1329 mehr…
  • Michailidou, Ioanna; Franzen, Florian; Lindemann, Udo: Method to create market-specific customer profiles for enhancing positive user experiences in cars. 14th International Design Conference, The Design Society, 2016, 1763-1772 mehr…
  • Michailidou, Ioanna; Lindemann, Udo: Managing user experience design: The role of a "storykeeper". 14th International Design Conference, The Design Society, 2016, 1773-1782 mehr…
  • Michailidou, Ioanna; Lindemann, Udo: Exploring the actual practice of user experience and scenario-based methods. 14th International Design Conference, The Design Society, 2016, 1783-1794 mehr…
  • Muenzberg, Christopher; Gericke, Kilian; Oehmen, Josef; Lindemann, Udo: An Exploratory Study of Crises in Product Development. 14th International Design Conference DESIGN 2016, 2016, 1533 - 1542 mehr…
  • Müller, Martina; Roth, Michael; Lindemann, Udo: The Hazard Analysis Profile: Linking Safety Analysis and SysML. 2016 Annual IEEE Systems Conference, IEEE, 2016, 1-7 mehr…
  • Omer, Mayada; Venkataraman, Srinivasan; Wilberg, Julian; Hollauer, Christoph: A knowledge management framework for identifying innovation potentials from use phase information. 14th International Design Conference , The Design Society, 2016, 1905-1914 mehr…
  • Rosner, Andreas; Hollauer, Christoph; Kammerl, Daniel; Omer, Mayada; Mörtl, Markus: Evaluation of life cycle analysis case studies: Findings for application and further development. 14th International Design Conference , The Design Society, 2016, 453-462 mehr…
  • Roth, Michael; Beetzen, Christoffer von; Lindemann, Udo: Matrix-based Multi-hierarchy Fault Tree Generation and Evaluation. 2016 Annual IEEE Systems Conference, IEEE, 2016, 1-7 mehr…
  • Roth, Michael; Gantenbein, Felix: Model-based Hazard and Propagation Assessment of Product Changes. 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, ASME, 2016 mehr…
  • Roth, Michael; Mayr, Lisa; Lindemann, Udo: A Knowledge Framework for Safety Analysis of User-Induced Changes. Proceedings of the DESIGN 2016 14th International Design Conference, Design Society, 2016, 1553–1562 mehr…
  • Roth, Michael; Mayr, Lisa; Ploetner, Maik; Lindemann, Udo: A continuous toolchain for User-Driven Customization. 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), IEEE, 2016, 597–601 mehr…
  • Roth, Michael; Münzberg, Christopher; Lindemann, Udo: A Method to Explicate Safety Functions. Proceedings of the DESIGN 2016 14th International Design Conference, Design Society, 2016, 463–472 mehr…
  • Roth, Michael; Ulrich, Christina Marianne; Holle, Maik; Lindemann, Udo: The Impact of User-driven Customization on the Development Process. Proceedings of the DESIGN 2016 14th International Design Conference, Design Society, 2016, 1357–1366 mehr…
  • Rupp, A.; Baier, H.; Mertiny, P.; Secanell, M.: Analysis of a flywheel energy storage system for light rail transit. Energy (107), 2016, p. 625-638 mehr…
  • Rötzer, Sebastian; Wilberg, Julian; Lindemann, Udo: Lean Innovation Methods: Application & Evaluation during a Student Project. Proceedings of the DESIGN 2016 14th International Design Conference, Design Society, 2016, 473-482 mehr…
  • Sadi, Tarek; Wilberg, Julian; Tommelein, Iris D.; Lindemann, Udo: Supporting the Design of Competitive Organizations by a Domain-Specific Application Framework for the Viable System Model. 18th International Dependency and Structure Modelling Conference, DSM 2016, 2016, 77-87 mehr…
  • Schatz, Markus E.; Hermanutz, Andreas; Baier, Horst J.: Multi-criteria optimization of an aircraft propeller considering manufacturing. Structural and Multidisciplinary Optimization, 2016 mehr…
  • Schmidt, Danilo Marcello; Braun, Felix; Schenkl, Sebastian Alexander; Mörtl, Markus: Interview study: How can Product-Service Systems increase customer acceptance of innovations? CIRP Journal of Manufacturing Science and Technology 1 (1), 2016, 001-012 mehr…
  • Schmidt, Danilo Marcello; Breyer, Manuel; Lindemann, Udo: Servitizationof on-campus mobility - A sharing system for electric skateboards. 5th Korea Conference on Service Design, Sungkyunkwan University, Creative Design Institute, 2016 mehr…
  • Schmidt, Danilo Marcello; Brüderle, Peter; Mörtl, Markus: Focusing Aspects of Customer Acceptance for Planning Product-Service Systems – A Case Study from Construction Machines Industry. 26th CIRP Design Conference, Elsevier, 2016, 830-835 mehr…
  • Schmidt, Danilo Marcello; Böttcher, Lena; Wilberg, Julian; Kammerl, Daniel; Lindemann, Udo: Modeling Transfer of Knowledge in an Online Platform of a Cluster. 26th CIRP Design Conference, Elsevier, 2016, 712-717 mehr…
  • Schmidt, Danilo Marcello; Hübner, Daniel; Mörtl, Markus: Product-Service Systems for Increasing Customer Acceptance Concerning Perceived Complexity. 4th International Conference on Serviceology, Society for Serviceology, 2016, 001-006 mehr…
  • Schmied, Christian; Gebhardt, Marcel; d'Albert, Hugo; Mörtl, Markus: Erweiterung der Design for Cost Methodik für indirekte Änderungskosten. Design for X - Beiträge zum 27. DfX-Symposium Oktober 2016, Tutech Verlag, 2016, 77-88 mehr…
  • Schmied, Christian; Gebhardt, Marcel; d'Albert, Hugo; Mörtl, Markus; Lindemann, Udo: Analyse des Systemverhaltens und Beeinflussung indirekter Änderungskosten. Tag des Systems Engineering 2016, Carl Hanser, 2016, 87-96 mehr…
  • Schweigert, Sebastian; D'Albert, Hugo; Lindemann, Udo: Enhancement of Collaboration and Communication between Design and Simulation Departments by Methods of Requirements Engineering. Proceedings of the DESIGN 2016 14th International Design Conference, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, 2016, 1397-1406 mehr…
  • Schweigert, Sebastian; Carro Saavedra, Cristina; Marahrens, Nils-Jorge; Lindemann, Udo: A Process Standardization Approach to Enhance Design Verification. R&D Management Conference 2016 “From Science to Society: Innovation and Value Creation”, 2016 mehr…
  • Schweigert, Sebastian; Çavuşoğlu, Mesut; Lindemann, Udo: Enhancing Collaboration between Design and Simulation Departments by Methods of Complexity Management. SUSTAINABILITY IN MODERN PROJECT MANAGEMENT Proceedings of the 18th International DSM Conference, 2016, 033-042 mehr…
  • Schöttl, Florian: Komplexität in sozio-technischen Systemen – Methodik für die komplexitätsgerechte Systemgestaltung in der Automobilproduktion. Dissertation, 2016 mehr…
  • Ungwattanapanit, T.; Baier, H.: Gradient-Based Optimization of Steered-Fibre Aircraft Panels with Postbuckling Consideration using Equivalent Static Loads. AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference [57., San Diego, 2016], 2016 mehr…
  • Utz, Andreas; Wilberg, Julian; Lindemann, Udo: Design for Logistics: Development of a Process Model. NordDesign 2016, 2016 mehr…
  • WEHRLE, R.; BAIER, H.: GRID BASED CONTOUR PARAMETERIZATION AND OPTIMIZATION OF EXTRUDED ALUMINUM PROFILES CONSIDERING STRUCTURAL AND MANUFACTURING ASPECTS. JOURNAL ON STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, 2016 mehr…
  • Weidmann, Dominik; Burgenmeister, Martin; Pfeiffer, Sabine; Lindemann, Udo: Open Organization in Engineering Design. NordDesign 2016, 2016 mehr…
  • Weidmann, Dominik; Chucholowski, Nepomuk; Lindemann, Udo: CHALLENGES IN IMPLEMENTING MODULE AND PLATFORM STRATEGIES IN PLANT ENGINEERING COMPANIES. Proceedings of the DESIGN 2016 14th International Design Conference, 2016 mehr…
  • Weidmann, Dominik; Kattner, Niklas; Hollauer, Christoph; Becerril, Lucia; Chucholowski, Nepomuk; Lindemann, Udo: Methods Collection to Support Requirements Engineering with Focus on Structuring and Consolidation of Requirements. 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), IEEE, 2016, 1215-1219 mehr…
  • Weinzierl, M.; Antonelli, V.; Baier, H.: Design and certification of CFRP chopper disks for the NEAT II TOF spectrometer: A lesson learned. ECCM17 - 17th European Conference on Composite Materials [6, 2016, Munich], 2016 mehr…
  • Weinzierl, M.; Baier, H.: Design and Optimization of a hub for a CFRP disk rotating at a very high speed. International Conference on Composite Structures (19th, Porto, 2016), 2016 mehr…
  • Weinzierl, M.; Baier, H.: Chopper Supplier Forum 2016 - Chopper disk manufacturer update TUM / LLB. Design and Engineering of Neutron Instruments Meeting, 2016 mehr…
  • Weinzierl, M.; Schatz, M.; Antonelli, V.; Baier, H.: Structural design optimization of CFRP chopper disks. Composite Structures (140), 2016, pp. 351-359 mehr…
  • Wilberg, Julian; Maisenbacher, Sebastian; Lindemann, Udo: Proactive Cost Management: Integrating Use Phase Data to Reduce Uncertainty. NordDesign 2016, 2016 mehr…
  • Wilberg, Julian; Preißner, Stephanie; Dengler, Christian; Füller, Kathrin; Gammel, Josef; Kernschmidt, Konstantin ; Kugler, Katharina; Vogel-Heuser, Birgit: Performance measurement in interdisciplinary innovation processes – Transparency through structural complexity management. 18th International Dependency and Structure Modelling Conference, DSM 2016, 2016, 11-22 mehr…
  • Wimmler, J; Wahle, M; Zimmermann, M; Schramm, D: Optimizing suspension systems for feasibility, performance and cost. Advanced Vehicle Control: Proceedings of the 13th International Symposium on Advanced Vehicle Control (AVEC'16), September 13-16, 2016, Munich, Germany, 2016 mehr…
  • Xu, D.; Karamooz, Morteza Mahdiabadi; Bartl, Andreas; Rixen, Daniel J.: A Comparison of Common Model Updating Approaches. Proceedings of the 34rd IMAC, A Conference and Exposition on Structural Dynamics, 2016, 2016 mehr…
  • d'Albert, Hugo; Lindemann, Udo: Engineering Design Education: Practical Methods of Product Development. 2016 International Conference on Design and Manufacturing Engineering , SAISE, 2016, 1-6 mehr…
  • d'Albert, Hugo; Schweigert, Sebastian; Lindemann, Udo: Anwendung von Anforderungsschablonen im Simulationsdatenmanagement. NAFEMS, 2016 mehr…
  • da Rocha-Schmidt, L.; Baier, H.: Ein Entwurfsprozess für Formvariable Strukturen mit Beispielen aus der Luft- und Raumfahrt. 4SMARTS Symposium für Smarte Strukturen und Systeme, 2016 mehr…
  • Ölmez, Manuela Iulia: Individuelle Unterstützung von Entscheidungsprozessen bei der Entwicklung innovativer Produkte. Dissertation, 2016 mehr…

2015

  • Browning, Tyson R.; Eppinger, Steven D.; Schmidt, Danilo Marcello; Lindemann, Udo: Modeling and managing complex systems. , 17th International DSM Conference. Carl Hanser Verlag, 2015 mehr…
  • Allaverdi, David; Herberg, Arne; Lindemann, Udo: Identifying Flexible Design Opportunities: Getting From a Procedural to an Execution Model. 20th International Conference on Engineering Design (ICED15), 2015, 091-102 mehr…
  • Antonelli, V. ; Weinzierl, M.; Baier, H.: Feasibility study of a sandwich chopper disc for a time of flight (TOF) spectrometer. ICCM 20 - 20th International Conference on Composite Materials [7, 2015, Copenhagen], 2015 mehr…
  • Antonelli, V.; Weinzierl, M.; Baier, H.: CFRP chopper discs: state of the art and long term perspective. DENIM 2015 - 4th Design and Engineering of Neutron Instruments Meeting [9, 2015, Budapest], 2015 mehr…
  • Baier, H.: Lightweight design of fiber composite structure with emphasis on vibration behavior. International Conference on Dynamics of Composite Structures, 2015 mehr…
  • Baier, H.; Wehrle, R.; Ungwattanapanit, T.: Definition alternativer Rumpfbauweisen von Verkehrsflugzeugen über modellbasierte Entwurfsoptimierung. DGLR Jahrestagung, 2015 mehr…
  • Bauer, Wolfgang; Bosch, Patrik; Chucholowski, Nepomuk; Elezi, Fatos; Maisenbacher, Sebastian; Lindemann, Udo; ; Maurer, Maik: Complexity Costs Evaluation in Product Families by Incorporating Change Propagation. 9th Annual IEEE International Systems Conference , IEEE, 2015SysCon 2015, 37-43 mehr…
  • Bauer, Wolfgang; Elezi, Fatos; Roth, Michael; Maurer, Maik: Determination of the Required Product Platform Flexibility from a Change Perspective. 2015 9th Annual IEEE International Systems Conference (SysCon), IEEE, 2015, 20-26 mehr…
  • Behncke, Florian G. H.; Kayser, Liza; Lindemann, Udo: Matching Product Architecture and Supply Network - Systematic Review and Future Research. 20th International Conference on Engineering Design (ICED15), The Design Society, 2015 mehr…
  • Behncke, Florian G. H.; Thimet, Paula; Barton, Benjamin; Lindemann, Udo: Influence of Design-for-X Guidelines on the Matching between the Product Architecture and Supply Networks. 20th International Conference on Engineering Design (ICED15), The Design Society, 2015 mehr…
  • Biedermann, Wieland: A minimal set of network metrics for analysing mechatronic product concepts. Dissertation, 2015 mehr…
  • Böhmer, Annette Isabel; Beckmann, Andreas; Lindemann, Udo: Open Innovation Ecosystem - Makerspaces within an Agile Innovation Process. ISPIM Innovation Summit (The Proceedings of the ISPIM Innovation Summit: Changing the Innovation Landscape), The International Society for Innovation Management , 2015 mehr…
  • Böhmer, Annette Isabel; Lindemann, Udo: Open Innovation Ecosystem: Towards Collaborative Innovation. 20th International Conference on Engineering Design (ICED15), 2015 mehr…
  • Carro Saavedra, Cristina; Fernandez Miguel; Lindemann, Udo: A worker-centered-model to understand the factors influencing knowledge application. 11th International Conference on Knowledge Management (ICKM 2015), 2015 mehr…
  • Carro Saavedra, Cristina; Lindemann, Udo: Increasing the amount of knowledge reuse from engineering design repositories. Doctoral Consortium of 7th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management (DC3K 2015), 2015, 21-30 mehr…
  • Chucholowski, Nepomuk; Lindemann, Udo: An Initial Metamodel to Evaluate Potentials for Graphbased Analyses of Product Development Projects. Proceedings of the 17th International DSM Conference, Carl Hanser Verlag, 2015, 75-88 mehr…
  • Da Rocha-Schmidt, Luiz; Hermanutz, A.; Baier, H.: A Morphing Lip Concept for Shape Variable Aircraft Engine Nacelles. DGLR Jahrestagung, 2015 mehr…
  • Deubzer, Frank: A Method for Product Architecture Management in Early Phases of Product Development. Dissertation, 2015 mehr…
  • Eichstetter, Markus; Müller, Steffen; Zimmermann, Markus: Product Family Design With Solution Spaces. Journal of Mechanical Design 137 (12), 2015, 121401 mehr…
  • Elezi, Fatos: Supporting the Design of Management Control Systems in Engineering Companies from Management Cybernetics Perspective. Dissertation, 2015 mehr…
  • Erschen, Stefan; Duddeck, Fabian; Zimmermann, Markus: Robust Design using classical optimization. PAMM 15 (1), 2015, 565-566 mehr…
  • Gramüller, B.; Stroscher, F.; Schmidt, J.: Design process and manufacturing of an unmanned blended wing-body aircraft. Deutscher Luft- und Raumfahrtkongress, 2015 mehr…
  • Großmann, Daniel J.; Kasperek, Daniel; Stahl, Benjamin; Lohmann, Boris; Maurer, Maik: Supporting PSS Innovation Processes by an Integrating Model Grid. 7th Industrial Product-Service Systems Conference - PSS, industry transformation for sustainability and business, 2015 mehr…
  • Guertler, Matthias R.; Fleischer, Sarah; Lindemann, Udo: Structural Analysis for Assessing and Managing Risks in Open Innovation. Stuttgarter Symposium für Produktentwicklung, 2015 mehr…
  • Guertler, Matthias R.; Haymerle, Richard; Endres, Florian; Lindemann, Udo: Identifying Open Innovation partners: a case study in plant manufacturing. The ISPIM Innovation Summit 2015, 2015, 1-18 mehr…
  • Guertler, Matthias R.; Schaefer, Simon; Lipps, Johannes; Stahl, Stephan; Lindemann, Udo: Archaeonics - How to use archaeological solutions for modern product development. 20th International Conference on Engineering Design (ICED15), 2015, 65-76 mehr…
  • Guertler, Matthias R.; Schaefer, Simon; Lipps, Johannes; Stahl, Stephan; Lindemann, Udo: Archaeonics - How to use archaeological solutions for modern product development. Proceedings of the 20th International Conference on Engineering Design (ICED15), 2015, 65-76 mehr…
  • Guertler, Matthias R.; Wiedemann, Francesco; Lindemann, Udo: The relevance of stakeholder analysis for Open Innovation. The R&D Management Conference 2015, 2015 mehr…
  • Guertler, Matthias R.; von Saucken, Constantin; Schneider, Maria; Lindemann, Udo: How to search for Open Innovation partners? 20th International Conference on Engineering Design (ICED15), 2015, 21-30 mehr…
  • Guertler, Matthias R.; von Saucken, Constantin; Tesch, Anna-Teresa; Damerau, Thomas; Lindemann, Udo: Systematic selection of suitable Open Innovation methods. The XXVI ISPIM Innovation Conference 2015, 2015 mehr…
  • Haryanto, Ismoyo: Aeroelastische Optimierung von Tragflügelstrukturen mit semi-analytischen Finite-Element-Modellen. Dissertation, 2015 mehr…
  • Hashemi Farzaneh, Helena; Helms, Maria Katharina; Lindemann, Udo: Influence of information and knowledge from biology on the variety of technical solution ideas. International Conference on engineering Design, ICED15, Design Society, 2015 mehr…
  • Hashemi Farzaneh, Helena; Helms, Maria Katharina; Lindemann, Udo: Visual representations as a bridge for engineers and biologists in bio-inspired design collaborations. International Conference on engineering Design, ICED15, Design Society, 2015 mehr…
  • Hermanutz, A.; Da Rocha-Schmidt, L.; Baier, H.: Technology Investigation of Morphing Inlet Lip Concepts for Flight Propulsion Nacelles. EUCASS [6., 2015, Krakau], 2015 mehr…
  • Hirth, Nicco; Maisenbacher, Sebastian; Kasperek, Daniel; Hollauer, Christoph; Maurer, Maik: An Approach to Reveal Starting Points for PSS Design Support with Dynamic Models. 7th Industrial Product-Service Systems Conference - PSS, Industry Transformation for Sustainability and Business, Elsevier, 2015, 462-467 mehr…
  • Hollauer, Christoph; Venkataraman, Srinivasan; Omer, Mayada: A Model to describe use phase of socio-technical sphere of product-service systems. 20th International Conference on Engineering Design (ICED15), The Design Society, 2015 mehr…
  • Hollauer, Christoph; Wilberg, Julian; Maisenbacher, Sebastian; Omer, Mayada: Towards a meta-model for the description of the sociotechnical perspective on Product-Service Systems. 7th Industrial Product-Service Systems Conference - PSS, industry transformation for sustainability and business , Elsevier , 2015 mehr…
  • Hollauer, Christoph; Wilberg, Julian; Omer, Mayada: A Matrix-based Framework to Support Dynamic Modelign of Sociotechnical Systems. Modeling and managing complex systems, Carl Hanser Verlag , 2015 mehr…
  • Hollauer, Christoph; Zäpfel, Martin; Kammerl, Daniel; Omer, Mayada; Lindemann, Udo: Sustainability Indicators - Overview, Synthesis and future Research Directions. EcoDesign 2015 - Sustainability Through lnnovation in Product Life Cycle Design, Springer , 2015 mehr…
  • Holle, M.; Maisenbacher, S.; Lindemann, U.: Design for Open Innovation - Individualization-Oriented Product Architecture Planning. 2015 9th Annual IEEE International Systems Conference (SysCon 2015), 2015, 397-402 mehr…
  • Holle, Maik; Gonnermann, Clemens; Lindemann, Udo: Customer Individual Product Development – Assessment of Individualization Potential. ISPIM Innovation Summit (The Proceedings of the ISPIM Innovation Summit: Changing the Innovation Landscape), The International Society for Innovation Management, 2015 mehr…
  • Häußler, M.; Schatz, M.; Baier, H.; Mertiny, P.: Optimization of polymer composite pipe under consideration of hybridization. ASME 2015 Pressure Vessels and Piping Conference, 2015 mehr…
  • Kammerl, Daniel; Malaschewski, Oliver; Schenkl, Sebastian A.; Mörtl, Markus: Decision uncertainties in the planning of Product-Service System portfolios. ICoRD’15 – Research into Design Across Boundaries Volume 2, Springer, 2015, 39-48 mehr…
  • Kammerl, Daniel; Schockenhoff, Damian; Hollauer, Christoph; Weidmann, Dominik; Lindemann, Udo: A Framework for Sustainable Product Development. EcoDesign 2015 - Sustainability Through lnnovation in Product Life Cycle Design, Springer, 2015 mehr…
  • Kasperek, Daniel; Berger, Sandra; Maisenbacher, Sebastian; Lindemann, Udo; Maurer, Maik: Structure-based System Dynamics Analysis - A Case Study of Benchmarking Process Optimization. 20th International Conference on Engineering Design (ICED15), Design Society, 2015 mehr…
  • Kasperek, Daniel; Bermond, Lukas; Zaggl, Michael A.; Raasch, Christina; Maurer, Maik S: Structure-based System Dynamics Analysis – A Case Study of Line Process Optimization. 2015 IEEE International Systems Conference (SysCon 2015) , 2015 mehr…
  • Kasperek, Daniel; Lichtenberg, Christian; Hollauer, Christoph; Omer, Mayada; Maurer, Maik S: Structure-based System Dynamics Analysis of Engineering Design Processes - A case study. 2015 IEEE International Systems Conference (SysCon 2015), 2015 mehr…
  • Kasperek, Daniel; Roth, Michael; Lozano, Christopher; Lindemann, Udo: Ein Leitfaden zur marktorientierten top-down Modularisierung im Maschinen- und Anlagenbau. Tag des Systems Engineering 2015, Carl Hanser, 2015, 377-386 mehr…
  • Kasperek,Daniel; Maisenbacher,Sebastian; Kohn,Andreas; Lindemann,Udo; Maurer,Maik: Increasing the reproducibility of structural modelling. Journal of Engineering Design, 2015, 27 mehr…
  • Kattner, Niklas; Holle, Maik, Lang, Christopher; Lindemann, Udo: Semantic Identification of Possible Cross-Industry Cooperation. ISPIM Innovation Summit (The Proceedings of the ISPIM Innovation Summit: Changing the Innovation Landscape), The International Society for Innovation Management, 2015 mehr…
  • Kosiol, Maike; Böhmer, Annette Isabel; Lindemann, Udo: Case Study: Individualization of a fully automated coffee machine. 20th International Conference on Engineering Design (ICED15), 201520th International Conference on Engineering Design (ICED15) mehr…
  • Kosiol, Maike; Weidmann, Dominik; Kammerl, Daniel; Lindemann, Udo: Potential of Common Methods to Integrate Sustainability Requirements in the Product Development Process – a Case Study. EcoDesign 2015 - Sustainability Through lnnovation in Product Life Cycle Design, Springer , 2015 mehr…
  • Kremer, Simon; Hoffmann, Andreas; Lindemann, Udo: Transferring Approaches from Experience Oriented Disciplines to User Experience Design: The ExodUX Model. iasdr 2015 interplay, Proceedings, International Association of Societies of Design Research (IASDR), 2015, 1163-1175 mehr…
  • Kremer, Simon; Lindemann, Udo: A Framework for Understanding, Communicating and Evaluating User Experience Potentials. 20th International Conference on Engineering Design (ICED15), Design Society, 201520th International Conference on Engineering Design (ICED15), S.517-527 mehr…
  • Kremer, Simon; Lindemann, Udo: Learning from Experience Oriented Disciplines for User Experience Design - A Research Agenda. Design, User Experience, and Usability: Design Discourse, Springer International Publishing, 20154th International Conference, DUXU 2015, Held as Part of HCI International 2015, Los Angeles, CA, USA, August 2-7, 2015, Proceedings, Part I, S.306-314 mehr…
  • Lachner, Florian; Saucken, Constantin von; Müller, Florian; Lindemann, Udo: Cross-Cultural User Experience Design: Helping Product Designers to Consider Cultural Differences. 7th International Conference on Cross-Cultural Design, Springer, 2015, 58-70 mehr…
  • Lang, Alexander; Lindemann Udo: From Open Innovation to Open Organization - how external information can be integrated more successfully into companies. The ISPIM Innovation Summit, 2015 mehr…
  • Lang, Alexander; Lindemann Udo: Transforming companies into Open Organisations to help Open Innovation to succed at last. The 13th International Open and User Innovation Conference, 2015 mehr…
  • Mahl, M.; Friemel, M.; Capobianco, L.; Haridas, A.; Baier, H.: Influences of Adhesive Properties on Strain Measurement Result of Rayleigh Backscattering Based Fibre Optic Sensors. IWSMH (International Workshop on Structural Health Monitoring), 2015 mehr…
  • Maisenbacher, Sebastian; Fink, Stefanie; Behncke, Florian; Lindemann, Udo: Analysis of correlations between system structure and costs by structural criteria. Modeling and managing complex systems, Proceedings of the 17th International DSM Conference, Hanser, 2015, 161-171 mehr…
  • Maisenbacher, Sebastian; Stanglmeier, Max; Behncke, Florian: Integrated Value Engineering – Adapted Approach to Assess different Concepts of a Jet Engine. 9th Annual IEEE International Systems Conference, IEEE, 2015, 263-268 mehr…
  • Metzler, Torsten: Models and Methods for the Systematic Integration of Cognitive Functions into Product Concepts. Dissertation, 2015 mehr…
  • Michailidou, Ioanna; Haid, Charlotte; Gebauer, Cornelia; Lindemann, Udo: The two-stage stroyboarding experience design method. 2015 IASDR Conference: Interplay, International Association of Societies of Design Research, 2015, 1470-1485 mehr…
  • Morasch, A.; Reeb, A.; Baier, H.; Weidenmann, K. A.; Schulze, V.: Characterization of debonding strength in steel-wire-reinforced aluminum and its influence on material fracture. Engineering Fracture Mechanics (141), 2015, pp. 242-259 mehr…
  • Moser, Uwe; Maisenbacher, Sebastian; Kasperek, Daniel; Maurer, Maik: Definition of an Approach for the Development of Product-Service Systems. 7th Industrial Product-Service Systems Conference - PSS, Industry Transformation for Sustainability and Business, Elsevier, 2015, 18-23 mehr…
  • Mörtl, Markus; Schmied, Christian: Design for Cost - A Review of Methods, Tools and Research Directions. Journal of the Indian Institute of Science 95 (4), 2015, 379-404 mehr…
  • Münzberg, Christopher; Bennour, Essalah; Venktaraman, Srinivasan; Lindemann, Udo: Crisis situations in engineering product development - An understanding from literature. Stuttgarter Symposiums für Produktentwicklung 2015, IRB Mediendienstleistungen , 2015, 1-8 mehr…
  • Münzberg, Christopher; Hammer, Jens; Brem, Alexander; Lindemann, Udo: Crisis Situations in Engineering Product Development: A TRIZ based approach. TRIZ Future Conference 2015 The 15th International Conference of the European TRIZ Association ETRIA, 2015 mehr…
  • Münzberg, Christopher; Hertrich, Nikolas; Frühling, Carl; Venktaraman, Srinivasan; Lindemann, Udo: Crisis situations in engineering product development - A method to identify crisis. 20th International Conference on Engineering Design (ICED15), The Design Society, 2015 mehr…
  • Ozdemir, N. G.; Scarpa, F.; Craciun, M.; Remillat, C.; Lira, C.; Jagessur, Y.; da Rocha-Schmidt, L.: Morphing nacelle inlet lip with pneumatic actuators and a flexible nano composite sandwich panel. Smart Materials and Structures Vol. 24, Nr. 12, 2015 mehr…
  • Roth, Michael; Gehrlicher, Steffi; Lindemann, Udo: Safety of Individual Products - Perspectives in the Context of Current Practices and Challenges. 20th International Conference on Engineering Design (ICED15), Design Society, 2015, 113-122 mehr…
  • Roth, Michael; Guertler, Matthias; Lindemann, Udo: Identifying and Utilizing Technological Synergies—A Methodological Framework. ICoRD’15 – Research into Design Across Boundaries, Springer, 2015, 291-302 mehr…
  • Roth, Michael; Harmeling, Jonas; Michailidou, Ioanna; Lindemann, Udo: The "Ideal" User Innovation Toolkit - Benchmarking and Concept Development. 20th International Conference on Engineering Design (ICED15), Design Society, 2015, 249-260 mehr…
  • Roth, Michael; Kronfeldner, Laura; Kasperek, Daniel; Lindemann, Udo: A Framework to Assess the Cost Impact of Organization and Processes in Complex Systems. Tag des Systems Engineering 2015, Carl Hanser, 2015, 217-226 mehr…
  • Roth, Michael; Nerb, Anton; Kasperek, Daniel; Lindemann, Udo: A tool to bridge the gap from functional dependencies to configuration rules translating knowledge on functional restrictions from systems engineers to a configurator for sales and decision makers. 2015 9th Annual IEEE International Systems Conference (SysCon), IEEE, 2015, 158-163 mehr…
  • Roth, Michael; Wolf, Moritz; Lindemann, Udo: Integrated Matrix-based Fault Tree Generation and Evaluation. 2015 Conference on Systems Engineering Research, Elsevier, 2015, 599–608 mehr…
  • Sadi, Tarek; Behncke, Florian G. H.; Maisenbacher, Sebastian; Kremer, Simon: Integrated Value Engineering - Framework for the Application of Methods for Visualization of Information. 20th International Conference on Engineering Design (ICED15), The Design Society, 2015 mehr…
  • Saucken, Constantin von; Gürtler, Matthias; Schneider, Maria; Lindemann, Udo: A Method Model for Distinguishing and Selecting Open Innovation Methods. 20th International Conference on Engineering Design (ICED15), The Design Society, 2015, 203-212 mehr…
  • Schatz, M.; Baier, H.: Effizierte Strukturoptimierung von Flechtstrukturen mit Hilfe entkoppelter Mehrskalenhomogenisierung und Berücksichtigung von Fertigungsrestriktionen. Landshuter Leichtbau Colloqium, 2015 mehr…
  • Schatz, M.; Baier, H.: Optimization of laminated structures considering manufacturing efforts. World Congress of Structural and Multidisciplinary Optimisation (WCSMO), 2015 mehr…
  • Schatz, M.; Baier, H.: Integration von Fertigungsaufwänden in die Entwurfsoptimierung von kurz- bis endlosfaserverstärkten Strukturen. NAFEMS Seminar: Optimierung und Robust Design, 2015 mehr…
  • Schenkl, Sebastian: Wissensorientierte Entwicklung von Produkt-Service Systemen. Dissertation, 2015 mehr…
  • Schmid, Lisa-Magdalena; Schäfer, Simon; Amereller, Maximilian, Lindemann, Udo: Kundespezifische Analyse des Fahrzeugnutzungsverhaltens zur Ableitung funktionaler Anforderungen. Design for X - Beiträge zum 25. DfX-Symposium , TuTech , 2015, 27-38 mehr…
  • Schmidt, Danilo Marcello; Haas, Marc; Kammerl, Daniel; Wilberg, Julian; Kissel, Maximilian Philipp; Lindemann, Udo: Analyzing industrial clusters using measures of structural complexity management. DSM Conference, Carl Hanser Verlag, 2015, 41-51 mehr…
  • Schmidt, Danilo Marcello; Kammerl, Daniel; Preuß, Alexander; Mörtl, Markus: Decision Methodology for Planning Product-Service Systems. International Conference on Business, Information, and Service Science, 2015 mehr…
  • Schmidt, Danilo Marcello; Kammerl, Daniel; Schultz, Bernhard; Schenkl, Sebastian Alexander; Mörtl, Markus: Identification of Knowledge and Processes in Design Projects. 20th International Conference on Engineering Design (ICED15), 2015, 283-292 mehr…
  • Schmidt, Danilo Marcello; Malaschewski, Oliver; Fluhr, Daniel; Mörtl, Markus: Customer-oriented Framework for Product-Service Systems. 7th Industrial Product-Service Systems Conference - PSS, industry transformation for sustainability and business, Elsevier, 2015, 289-292 mehr…
  • Schmidt, Danilo Marcello; Malaschewski, Oliver; Jaugstetter, Matthias; Mörtl, Markus: Service Classification to Support Planning Product-Service Systems. Asian Design Engineering Workshop (A-DEWS), 2015, 34-39 mehr…
  • Schmidt, Danilo Marcello; Malaschewski, Oliver; Mörtl, Markus: Decision-making process for Product Planning of Product-Service Systems. 7th Industrial Product-Service Systems Conference - PSS, industry transformation for sustainability and business, Elsevier, 2015, 468-473 mehr…
  • Schmidt, Danilo Marcello; Mörtl, Markus: Product-Service Systems for Increasing Customer Acceptance Concerning Perceived Complexity. Asian Design Engineering Workshop (A-DEWS), 2015, 77-82 mehr…
  • Schmidt, Danilo Marcello; Preißner, Stephanie; Hermosillo Martínez, José Alonso; Quiter, Michael; Mörtl, Markus; Raasch, Christina: Integration of User Knowledge Across the Lifecycle of Integrated Product-Service Systems - An Empirical Analysis of the Relevance for PSS Development and Management. 20th International Conference on Engineering Design (ICED15), 2015, 199-208 mehr…
  • Schmied, Christian; Reinbold, Georg; Amekrane, Rachid; Igenbergs, Eduard; Mörtl, Markus; Lindemann, Udo: Extended Cost Analysis with Systems Engineering Considerations. Tag des Systems Engineering, Carl Hanser, 2015, 227-236 mehr…
  • Schweigert, Sebastian; D'Albert, Hugo; Lindemann, Udo: An Approach for the Development of Requirements-Oriented Simulation Management. NAFEMS European Conference: Simulation Process and Data Management (SPDM), 2015, 123-126 mehr…
  • Schöttl, Florian; Lindemann, Udo: Quantifying the Complexity of Socio-technical Systems – A Generic, Interdisciplinary Approach. 2015 Conference on Systems Engineering Research, Elsevier BV, 2015, 1-10 mehr…
  • Si, L.; Baier, H.: Real-Time Impact Visualization Inspection of Aerospace Composite Structures with Distributed Sensors. Sensors, 2015, pp. 16536-16556 mehr…
  • Si, L.; Baier, H.: An Advanced Ensemble Impact Monitoring And Identification Technique For Aerospace Composite Cantilever Structures. NDT.net E-Journal (Vol. 20, No. 2), 2015 mehr…
  • Staack, H.; Seibert, D.; Baier, H.: Application oriented failure modeling and characterization for polymers in automotive pedestrian protection. International Conference on Computational Plasticity (COMPLAS). Fundamentals and Application [8., Barcelona, 2015], 2015 mehr…
  • Stroscher, F.; Schirrer, A.; Valasek, M.: Numerical Simulation Model. In: Modeling and control of a blended wing body aircraft. Springer, 2015 mehr…
  • Ungwattanapanit, T.; Kamath, S.; Sasikumar, A.; Baier, H.: Gradient-based Optimization of Postbuckled Steered-Fiber Aircraft Shell via ESLM. European Altair Technology Conference (EATC), 2015 mehr…
  • Weidmann, Dominik; Lindemann, Udo: Towards a Framework of an Open Organization. The XXVI ISPIM Innovation Conference 2015 , 2015 mehr…
  • Weidmann, Dominik; Maisenbacher, Sebastian; Kasperek, Daniel; Maurer, Maik: Product-Service System Development with Discrete Event Simulation. 2015 IEEE International Systems Conference (SysCon 2015), IEEE, 2015 mehr…
  • Weinzierl, M.; Achleitner, J.; Baier, H.: Highly Extensible Skin of a Variable Geometry Wing Leading Edge of a High-Performance Sailplane. Technical Soaring (Vol. 39, No. 1), 2015, pp. 4-9 mehr…
  • Weinzierl, M.; Baier, H.: Leichtbau bei extrem schnell rotierenden Scheiben für neutronenphysikalische Versuchsanlagen. Leichtbauseminar, 2015 mehr…
  • Weinzierl, M.; Baier, H.; Krämer, L.; Antonelli, V.: Design and certification of the chopper disks for the NEAT II TOF spectrometer: A lesson learned. DENIM 2015 - 4th Design and Engineering of Neutron Instruments Meeting [9, 2015, Budapest], 2015 mehr…
  • Weinzierl, M.; Schatz, M.; Antonelli, V.; Baier, H.: Structural Design Optimization of CFRP Chopper Disks. International Conference on Composite Structures, 2015 mehr…
  • Wickel, Martina; Lindemann, Udo: How to integrate information about past Engineering Changes in new change processes ? 20th International Conference on Engineering Design (ICED15), Design Society, 2015, 229-238 mehr…
  • Wickel, Martina; Lindemann, Udo: How to build up an Engineering Change dependency model based on past change data? Modeling and managing complex systems, Carl Hanser Verlag, 2015, 221-231 mehr…
  • Wilberg, Julian; Elezi, Fatos; Tommelein, Iris; Lindemann, Udo: Supporting the Implementation of Engineering Change Management with the Viable System Model. IEEE International Conference on Systems, Man, and Cybernetics (SMC2015), 2015 mehr…
  • Wilberg, Julian; Elezi, Fatos; Tommelein, Iris; Lindemann, Udo: Using a Systemic Perspective to Support Engineering Change Management. Complex Adaptive Systems, Elsevier B.V. , 2015, 287 – 292 mehr…
  • Wilberg, Julian; Hollauer, Christoph; Omer, Mayada: Supporting the Performance Assessment of Product-Service Systems during the Use Phase. 7th Industrial Product-Service Systems Conference - PSS, industry transformation for sustainability and business, Elsevier, 2015, 203–208 mehr…
  • Wimmler, Jens; Schramm, Dieter; Wahle, Martin; Zimmermann, Markus: Concurrent design of vehicle tires and axles. In: 6th International Munich Chassis Symposium 2015. Springer Fachmedien Wiesbaden, 2015 mehr…
  • ZIMMERMANN, Markus; WAHLE, Martin: Solution Spaces for Vehicle Concepts and Architectures. 24th Aachen Colloquium Automobile and Engine Technology, 2015 mehr…
  • d'Albert H., Venkataraman S., Omer M.: Application of System Dynamics for Modeling Product-Service Systems. ICETA 2015, 2015 mehr…
  • d'Albert, Hugo; Carro Saavedra, Cristina; Lindemann, Udo: Elicitation of Requirements for a knowledge-based Framework in Product Development Process. 11th International Conference on Knowledge Management (ICKM2015) , 2015 mehr…
  • d'Albert, Hugo; Carro Saavedra, Cristina; Maurer Maik: Business Knowledge Development using Knowledge Maps. International Conference on Business and Internet – Fall Session (ICBI 2015-Fall) , 2015 mehr…
  • von Saucken, Constantin; Wenzler, Andreas; Lindemann, Udo: How to Impress Your User: Guideline for Designing the Product Impression. ICoRD’15 – Research into Design Across Boundaries, Springer, 20155th International Conference on Research into Design 2015 (ICoRD '15), 193-203 mehr…

2014

  • Marle, Frank; Jankovic, Marija; Maurer, Maik; Schmidt, Danilo Marcello; Lindemann, Udo: Risk and change management in complex systems. , Proceedings of the 16th International DSM Conference. Carl Hanser Verlag, 2014 mehr…
  • Allaverdi, D.; Herberg A.; Lindemann U.: Identification of Flexible Design Opportunities (FDO) in offshore drilling systems by market segmentation. Proceedings of the DESIGN 2014 13th International Design Conference, 2014, 1451-1462 mehr…
  • Angevain, Jean-Christophe; Rodrigues, Goncalo; Santiago Prowald, Julian; Mangenot, Cyril; Datashvil, L.: Sidelobe Level Reduction of Faceted Mesh Reflector Antenna Using Phyllotactic Arrangements. International Conference on Advanced Lightweight Structures and Reflector Antennas, 2014 mehr…
  • Baier,H.; Endler,S.: Fiber-metal-composites for synthesizing electro-magnetic and mechanical behavior. SSMET, 2014, 6 mehr…
  • Bauer, Wolfgang; Braun, Felix; Elezi, Fatos; Maurer, Maik: Monetary Evaluation of Platform Strategies. 8th Annual IEEE International Systems Conference (SysCon), IEEE, 2014, 567-574 mehr…
  • Bauer, Wolfgang; Chucholowski, Nepomuk; Lindemann, Udo ; Maurer, Maik: Domain-Spanning Change Propagation in Changing Technical Systems. First Asia-Pacific Conference on Complex Systems Design & Management (CSD&M Asia 2014), Springer, 2014, 111-123 mehr…
  • Bauer, Wolfgang; Elezi, Fatos; Maurer, Maik: Situative Selection of Platform Design Methods. 4th International Engineering Systems Symposium CESUN 2014, 2014 mehr…
  • Bauer, Wolfgang; Kasperek, Daniel, Maisenbacher, Sebastian; Maurer, Maik: Application of Structural Domain - Spanning Criteria in an Industrial Case - Study. The 16 th International Dependency and Structure Modelling Conference, 2014DSM 2014, 348-357 mehr…
  • Bauer, Wolfgang; Werner, Christopher; Elezi, Fatos; Maurer, Maik: Forecasting of Future Developments based on Historic Analysis. 13th International Design Conference DESIGN 2014, The Design Society, 2014, 735-748 mehr…
  • Becerril, Lucia; Kasperek, Daniel; Roth, Michael; Lindemann, Udo: Visualization of Interdisciplinary Functional Relations in Complex Systems. Proceedings of the DESIGN 2014 13th International Design Conference, The Design Society, 2014, 1239-1248 mehr…
  • Behncke, F. G. H.; Eichinger, J.; Lindemann, U.: Involvement of Procurement in the Product Creation Process: A Systematization Scheme of Measures. 47th CIRP Conference on Manufacturing Systems, Elsevier, 2014, 546-551 mehr…
  • Behncke, F. G. H.; Holstein, J.; Lindemann, U.: Method for the Supplier Selection in Supply Chain Networks - An Approach of Structural Complexity Management. Systems Conference (SysCon), 2014 8th Annual IEEE, IEEE, 2014, 497-504 mehr…
  • Behncke, F. G. H.; Walter, F. M.A.; Lindemann, U.: Procedure to Match the Supply Chain Network Design with a Products’ Architecture. 47th CIRP Conference on Manufacturing Systems, Elsevier, 2014, 432-437 mehr…
  • Behncke, F.G.H.; Maisenbacher, S.; Maurer, M.: Extended model for integrated value engineering. Conference on Systems Engineering Research (CSER 2014), Elsevier, 2014, 781-788 mehr…
  • Behncke, Florian G.H.; Maisenbacher, Sebastian; Maurer, Maik: Extended Model for Integrated Value Engineering. Conference on Systems Engineering Research (CSER 2014), Elsevier BV, 2014, 781-788 mehr…
  • Bossemeyer, Mona; Aydin, Kadir; Metzler, Torsten; Lindemann, Udo: ANALYSIS OF THE SYSTEMATIC APPROACH TO DEVELOP COGNITIVE PRODUCTS IN ACADEMIC RESEARCH PROJECTS. 13th International DESIGN Conference - DESIGN 2014, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, 2014, 759-771 mehr…
  • Böhmer, A.I.; Zöllner, A.M.; Kuhl, E.; Lindemann, U.: Medical Device Design Process: A Medical Engineering Perspective. 13th International Design Conference, Design Society, 2014, 749-758 mehr…
  • Böhmer, Annette Isabel; Zöllner, Alexander Martin, Kuhl, Ellen; Lindemann, Udo: Medical Device Design Process: A Medical Engineering Perspective. 13th International Design Conference , Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb , 2014, 749-758 mehr…
  • Böhmer, Annette; Zöllner, Alexander; Kuhl, Ellen; Lindemann, Udo: Towards an Instrumented Tissue Expander. Proceedings of the 2014 IEEE - International Conference on Industrial Engineering and Engineering Management, IEEE, 2014, 14 mehr…
  • Carro Saavedra, C.; Schrieverhoff, P.; Lindemann, U.: A Knowledge-based Approach to Optimize Simulations in the Product Development Process. ICADRE 2014, 2014 mehr…
  • Carro Saavedra, C.; Schrieverhoff, P.; Lindemann, U.: Analysing the Concept of Value to Identify Relevant Stakeholders' Preferences in Design for Adaptability. DESIGN CONFERENCE 2014, 2014, 141-152 mehr…
  • Chucholowski, Nepomuk; Schoettl, Florian; Bauer, Wolfgang; Schenkl, Sebastian A.; Behncke, Florian; Lindemann, Udo: A Process Taxonomy Model for Engineering Design Research. Modelling and Management of Engineering Processes, Springer , 2014Proceedings of the 3rd International Conference 2013, 1-10 mehr…
  • Chucholowski, Nepomuk; Wolfenstetter, Thomas; Wickel, Martina C.; Krcmar, Helmut; Lindemann, U.: Towards Cycle-oriented Traceability in Engineering Change Management. 13th International Design Conference - DESIGN 2014, Design Society, 2014, 1491-1500 mehr…
  • Datashvili, L.; Baier, H.: Derivation of Different Types of Antenna Reflectors from the Principle of Highly Flexible Structures. European Conference on Antennas and Propagation [8., The Hague, The Netherlands, 2014], 2014 mehr…
  • Datashvili, L.; Baier, H.; Endler, S.; Maghaldadze, N.; Friemel, M.; Luo, T.; Bedukadze, G; Chkhikvadze, K.; Ihle, A.; Santiago-Prowald, J.: Demensional stability and shape-accuracy of shell-membrane reflecting surfaces made of fiber-reinforced elastomers. International Conference on Advanced Lightweight Structures and Reflector Antennas [2., 2014, Tbilisi], 2014 mehr…
  • Datashvili, L.; Bedukadze, G.: Challenges in ground testing of large space lightweight structures. International Conference on Advanced Lightweight Structures and Reflector Antennas [2., 2014, Tbilisi], 2014 mehr…
  • Datashvili, L.; Maghaldadze, N.; Endler, S.; Pauw, J.; He, P. ; Baier, H.; Ihle, A.; Prowald, J. S.: Advances in Mechanical Architectures of Large Precision Space Apertures. European Conference on Spacecraft Structures, Materials & Environmental Testing, 2014 mehr…
  • Datashvili, L.; Maghaldadze, N.; Pauw, J.; Endler, S.: Advanced Architectures of Large Space Deployable Reflectors: from Medium to Very Large Sizes. International Conference on Advanced Lightweight Structures and Reflector Antennas [2., 2014, Tbilisi], 2014 mehr…
  • Ehrlenspiel, Klaus; Kiewert, Alfons; Lindemann, Udo; Mörtl, Markus: Kostengünstig Entwickeln und Konstruieren - Kostenmanagement bei der integrierten Produktentwicklung. Springer Vieweg (7.. Aufl.), 2014 mehr…
  • Eichstetter, Markus; Redeker, Christian; Müller, Steffen; Kvasnicka, Pavel; Zimmermann, Markus: Solution spaces for damper design in vehicle dynamics. In: Proceedings. Springer Fachmedien Wiesbaden, 2014 mehr…
  • Eichstetter, Markus; Redeker, Christian; Müller, Steffen; Kvasnicka, Pavel; Zimmermann, Markus: Solution spaces for damper design in vehicle dynamics. 5th International Munich Chassis Symposium, 2014 mehr…
  • Elezi, Fatos; Resch, David; Tommelein, Iris; Bauer, Wolfgang; Maurer, Maik: A Viable System Model Perspective on Variant Management based on a Structural Complexity Management Approach. 16th International DSM Conference, Carl Hanser Verlag GmbH & Co. KG , 2014, 13-22 mehr…
  • Elezi, Fatos; Schmidt, Michael Timo; Tommelein, Iris; Lindemann, Udo: Analyzing Implementation of Lean Production Control with the Viable System Model. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2014 mehr…
  • Endler, S.; Datashvili, L.; Baier, H.; Roose, S.: Enhancement of the Electro-Magnetic Behaviour of Flexible Fiber Composite Materials by Surface Coating. International Conference on Advanced Lightweight Structures and Reflector Antennas [2., 2014, Tbilisi], 2014 mehr…
  • Fender, Johannes; Graff, L.; Harbrecht, H.; Zimmermann, Markus: Identifying Key Parameters for Design Improvement in High-Dimensional Systems With Uncertainty. Journal of Mechanical Design 136 (4), 2014, 041007 mehr…
  • Franke, Stephan: Strategieorientierte Vorentwicklung komplexer Produkte – Prozesse und Methoden zur zielgerichteten Komponentenentwicklung am Beispiel Pkw. Audi AG: Audi-Dissertationsreihe Bd. 91. Cuvillier E, 2014 mehr…
  • Friemel, M.; Maghaldadze, N.; Baier, H.; Datashvili, L.: Alternative Thermoelastic Deformation Measurement Techniques for Space Structures in Laboratoy Conditions. International Conference on Advanced Lightweight Structures and Reflector Antennas [2., 2014, Tbilisi], 2014 mehr…
  • Friemel,M.; Baier,H.: Thermal Testing of CFRP Under A High Number Of Temperature Cycles. SSMET, 2014 mehr…
  • Guertler, M. R.; Holle, M.; Guber, D.; Lindemann, U.: How to Determine a Companys Open Innovation Situation. 13th International Design Conference DESIGN 2014, 2014, 1541-1550 mehr…
  • Guertler, M. R.; Holle, M.; Lindemann, U.: Open Innovation: Industrial Application and Demands – a Qualitative Study. The R&D Management Conference 2014, Fraunhofer Verlag, 2014, 1024-1030 mehr…
  • Guertler, M. R.; Lewandowski, P.; Lindemann, U.: Stakeholder-Analysis featuring Open Innovation. XXV ISPIM Conference - Innovation for Sustainable Economy and Society, 2014 mehr…
  • Guertler, Matthias Rudolf: How to assess actors for an Open Innovation project? JMPM - Journal of Modern Project Management 2 (2), 2014, 56-63 mehr…
  • Hass, Johannes; Rensch, Christian; Salvamoser, Ruben; Münzberg, Christopher; Lindemann, Udo; Mayer, Oliver: Experimental Proof of the Creative Value of TRIZ. The 10th International Conference - TRIZfest-2014, International TRIZ Association - MATRIZ, 2014, 144-152 mehr…
  • Helms, S.; Behncke, F. G. H.; Lindlöf, L.; Wickel, M. C.; Chucholowski, N.; Lindemann, U.: Procedure Model for the Indication of Change Propagation. 13th International Design Conference DESIGN 2014, 2014, 221-230 mehr…
  • Helms, S.; Behncke, F. G. H.; Lindlöf, L.; Wickel, M. C.; Maisenbacher, S.; Lindemann, U.: Classification of methods for the Indication of Change Propagation - A Literature Review. 13th International Design Conference DESIGN 2014, 2014, 211-220 mehr…
  • Helten, Anna Katharina: Einführung von Lean Development in mittelständische Unternehmen - Beschreibung, Erklärungsansatz und Handlungsempfehlungen. Dissertation, 2014 mehr…
  • Hesse, Hans-Josef; Kohn, Andreas; Lehmann, Jörn; Farzaneh, Helena Hashemi; Ihlenburg, Ditmar: Integration of Semantic Technologies for Business Process Support in the Automation Industry. In: Wahlster, Wolfgang; Grallert, Hans-Joachim; Wess, Stefan; Friedrich, Hermann; Widenka, Thomas (Hrsg.): Towards the Internet of Services: The THESEUS Research Program. Springer Science + Business Media, 2014, 405-416 mehr…
  • Hollauer, Christoph; Wickel, Martina; Lindemann, Udo: Learning from past changes - towards a learning-oriented engineering change management. Proceedings of the 2014 IEEE International Conference on Industrial Engineering and Engineering Management, IEEE, 2014 mehr…
  • Holle, M.; Lindemann, U.: Design for Open Innovation (DfOI) – Product Structure Planning for Open Innovation Toolkits. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) 2014, 2014 mehr…
  • Holle, M.; Roth, M.; Guertler, M. R.; Lindemann, U.: From Customer Innovations to Manufactured Products: A Project Outlook. International Conference on Innovation, Management and Technology, 2014, 918-923 mehr…
  • Holle, M.; du Maire, M. N.; Lindemann, U.: Motivation of External Open Innovation Partners. International Conference on Advanced Design Research and Education (ICADRE), 2014, 150-155 mehr…
  • Hooshmand, Amir: Solving Engineering Design Problems through a Combination of Generative Grammars and Simulations. Dissertation, 2014 mehr…
  • Ihle, A.; Datashvili, L.; Schmidt, J.; Hartmann, D.; Proietti Zolla, P.; Santiago-Prowald, J.: Scalable - Innovative Scalable Large Deployable Antenna Reflector. European Conference on Spacecraft Structures, Materials & Environmental Testing, 2014 mehr…
  • Kain, Andreas: Methodik zur Umsetzung der Offenen Produktentwicklung. Dissertation, 2014 mehr…
  • Kaiser, Maria Katharina; Hashemi Farzaneh, Helena; Lindemann, Udo: BIOSCRABBLE – THE ROLE OF DIFFERENT TYPES OF SEARCH TERMS WHEN SEARCHING FOR BIOLOGICAL INSPIRATION IN BIOLOGICAL RESEARCH ARTICLES. 13th International Design Conference - Proceedings, Faculty of Mechanical Engineering and Naval Architecture, 2014, 241 - 250 mehr…
  • Kammerl, Daniel; Bauer, Wolfgang, Mörtl, Markus: Identifikation der Informationsflüsse zwischen Produkt- und Produktionstechnologieplanung. 10. Symposium für Vorausschau und Technologieplanung, 2014 mehr…
  • Kammerl, Daniel; Enseleit, Martin; Orawski, Robert; Mörtl, Markus: Depicting Product-Service Systems in the early phase of the product development. IEEE International Conference on Industrial Engineering and Engineering Management, 2014 mehr…
  • Kasperek, Daniel; Chucholowski, Nepomuk; Maisenbacher, Sebastian; Lindemann, Udo; Maurer, Maik: A Method for Impact Analysis of Cyclic Changes within Innovation Processes of PSS. Procedia CIRP (2014), Elsevier B.V., 2014 6th CIRP Conference on Industrial Product-Service Systems mehr…
  • Kasperek, Daniel; Fink, Stefanie; Maisenbacher, Sebastian; Bauer, Wolfgang; Maurer, Maik: Assessing the Informative Value of Complexity Metrics Within Design Structure Matrices in Early Development Phases of Complex Systems. 2014 IEEE International Systems Conference (SysCon 2014), IEEE, 2014 mehr…
  • Kasperek, Daniel; Lindinger, Markus; Maurer, Maik: A structure-based System Dynamics Approach for Assessing Engineering Design Processes. 32nd International Conference of the System Dynamics Society, 2014ISDC 2014 mehr…
  • Kasperek, Daniel; Maisenbacher, Sebastian; Maurer, Maik: Assessing Process Sequences in Engineering Design by DSM-based System Dynamics Simulation. 4th International Engineering Systems Symposium, CESUN 2014, 2014 mehr…
  • Kasperek, Daniel; Maisenbacher, Sebastian; Maurer, Maik: Structure-based Compilation of System Dynamics Models for Assessing Engineering Design Process Behavior. The 16th International DSM Conference, 2014DSM 2014, 233-242 mehr…
  • Kasperek, Daniel; Maisenbacher, Sebastian; Maurer, Maik: Structure-based Compilation of System Dynamics Models for Assessing Engineering Design Process Behavior. The 16th International DSM Conference, 2014DSM 2014, 233-242 mehr…
  • Kasperek, Daniel; Maisenbacher, Sebastian; Maurer, Maik: Structure-based Analysis of Dynamic Engineering Process Behavior. 2014 IEEE International Systems Conference (SysCon 2014), 2014 mehr…
  • Kirner, geb. Eben, Katharina Gabriele Maria: Zusammenhang zwischen Leistung in der Produktentwicklung und Variantenmanagement – Einflussmodell und Analysemethode. Dissertation, 2014 mehr…
  • Kissel, Maximilian: Mustererkennung in komplexen Produktportfolios. Dissertation, 2014 mehr…
  • Kohn, Andreas: Entwicklung einer Wissensbasis für die Arbeit mit Produktmodellen. Dissertation, 2014 mehr…
  • Kortler, Sebastian: Absicherung von Eigenschaften komplexer und variantenreicher Produkte in der Produktentwicklung. Dissertation, 2014 mehr…
  • Kremer, Simon; Michailidou, Ioanna; von Saucken, Constantin; Lindemann, Udo: User Experience Milestones - Structuring the Development of Experience Products. Design, User Experience, and Usability. Theories, Methods, and Tools for Designing the User Experience , Springer International Publishing, 2014Third International Conference, DUXU 2014, Held as Part of HCI International 2014, Heraklion, Crete, Greece, June 22-27, 2014, Proceedings, Part I, 308-318 mehr…
  • Kuhlmann, Florian; Hannemann, Jan; Traub, Myriam; Böhme, Christoph; Zillner, Sonja; Cavallaro, Alexander; Seifert, Sascha; Decker, Björn; Traphöner, Ralph; Kayser, Sven; Lindemann, Udo; Prasse, Stefan; Marczinski, Götz; Grützner, Ralf; Fasse, Axel; Oberle, Daniel: The THESEUS Use Cases. In: Wahlster, Wolfgang; Grallert, Hans-Joachim; Wess, Stefan; Friedrich, Hermann; Widenka, Thomas (Hrsg.): Towards the Internet of Services: The THESEUS Research Program. Springer Science + Business Media, 2014, 259-287 mehr…
  • Lang, Alexander; Bauer, Lara; Lindemann Udo: Socially indicated Match Making Method, SIM3, an Alternative Way of Identifying the right OI Method. 1st Annual World Open Innovation Conference, 2014 mehr…
  • Lang, Alexander; van Delden, Catharina: New Approaches in Selecting the right Open Innovation Method. In: Innosabi GmbH (Hrsg.): Crowdsourced Innovation. Innosabi GmbH, 2014, 72 - 78 mehr…
  • Langer, M.; Olthoff, C.; Datashvili, L.; Baier, H.; Maghaldadze, N.; Walter, U.: Deployable Structures in the CubeSat Program MOVE. International Conference on Advanced Lightweight Structures and Reflector Antennas, 2014 mehr…
  • Lindemann, Udo: Models of Design. In: Chakrabarti, A; Blessing, L.T.M. (Hrsg.): An Anthology of Theories and Models of Design. Springer (1. Aufl.), 2014, 121-132 mehr…
  • Lindemann, Udo: Supporting Creativity in Engineering Design: A Position Paper. In: Taura, Tashiharu (Hrsg.): Principia Designae - Pre-Design, Design, and Post-Design. Springer Japan (1. Aufl.), 2014, 17-24 mehr…
  • Maier, Jakob F.; Wynn, David C.; Biedermann, Wieland; Lindemann, Udo; Clarkson, P. John: Simulating progressive iteration, rework and change propagation to prioritise design tasks. Res Eng Design 25, 2014, 283-307 mehr…
  • Maisenbacher, Sebastian; Weidmann, Dominik; Kasperek, Daniel; Omer, Mayada: Applicability of Agent-Based Modeling for Supporting Product-Service System Development. Product Services Systems and Value Creation. Proceedings of the 6th CIRP Conference on Industrial Product-Service System, Elsevier, 2014, 356-361 mehr…
  • Medzmariashvili, E.; Santiago Prowald, J.; Mangenot, C.; Datashvili, L.; Tsignadze, N.; Scialino, L., Van´t Klooster, K.; Janikashvili, M.; Tusishvili, O.; Philipenko, L.; Medzariashvili, N.; Jakhua, A.: New Constructions of Lightweight Deployable Reflectors. International Conference on Advanced Lightweight Structures and Reflector Antennas, 2014 mehr…
  • Medzmariashvili, E.; Tsignadze, N.; Santiago Prowald, J.; Datashvili, L.; Tusishvili, O.; Phavlenishvili, G.: Conical V-Fold Bar Ring with Flexible Pre-stressed Center. International Conference on Advanced Lightweight Structures and Reflector Antennas [2., 2014, Tbilisi], 2014 mehr…
  • Michailidou, Ioanna; von Saucken, Constantin; Kremer, Simon; Lindemann, Udo: Managing Complexity in User Experinece Design: Matrix-based Methods for Connecting Technologies and User Needs. Proceedings of the 13th International Design Conference DESIGN 2014, 2014, 559-568 mehr…
  • Michailidou, Ioanna; von Saucken, Constantin; Kremer, Simon; Lindemann, Udo: A User Experience Design Toolkit. Design, User Experience, and Usability. Theories, Methods, and Tools for Designing the User Experience, Springer International Publishing, 2014Third International Conference, DUXU 2014, Held as Part of HCI International 2014, Heraklion, Crete, Greece, June 22-27, 2014, Proceedings, Part I mehr…
  • Morasch, A.; Matias, D.; Baier, H.: Material modelling for crash simulation of thin extruded aluminium sections. International Journal of Crashworthiness, 2014 mehr…
  • Morasch, A.; Wedekind, M.; Matias, D.; Baier, H.: Thermo-mechanical behavior and material failure of steel wire reinforced alumimum. Procedia CIRP (18), 2014, PP. 144-149 mehr…
  • Moya Carreras, D.; Carro Saavedra, C.; Schrieverhoff, P.; Haupt, S.; Lindemann, U.: Identification of Key Parameters for Adaptable Design. ICADRE 2014, 2014 mehr…
  • Muenzberg, C.; Michl, K.; Heigl, H.; Jeck, T.; Lindemann, U.: FURTHER DEVELOPMENT OF TRIZ FUNCTION ANALYSIS BASED ON APPLICATIONS IN PROJECTS. 13th International Design Conference DESIGN 2014, 2014, 333 - 342 mehr…
  • Münzberg, Christopher; Heigl, Hubertus; Schrieverhoff, Phillip; Lindemann, Udo: Development of a plastic recycler applying TRIZ. The 10th International Conference - TRIZfest-2014, International TRIZ Association - MATRIZ , 2014, 117-128 mehr…
  • Nies, Benedikt Johannes: Nutzungsgerechte Dimensionierung des elektrischen Antriebssystems für Plug-In Hybride. Dissertation, 2014 mehr…
  • Omer, Mayada; Ganguly, Anirban; Behncke, Florian; Hollauer, Christoph: A Complexity Driven Approach for Risk Evaluation in Use-Oriented Product-Service Systems Supply Chains. Proceedings of the 2014 9th International Conference on Systems of Systems Engineering (SoSE), IEEE, 2014, 290-295 mehr…
  • Omer, Mayada; Mostashari, Ali; Lindemann, Udo: Resilience Analysis of Soft Infrastructure Systems. Conference on Systems Engineering Research (CSER 2014), Elsevier BV, 2014, 565-574 mehr…
  • Pucillo, Francesco; Michailidou, Ioanna; Cascini, Gaetano; Lindemann, Udo: Storytelling and a narrative analysis based method for extracting users´ motives in UX design processes. Proceedings of NordDesign 2014, Aalto Design Factory Aalto Univeristy, 2014 mehr…
  • Rapp,S.; Kuisl,A.; Zauner,C.; Reinicke,G.; Baier,H.: Experimental Verification of a Micro-Vibration Analysis Software for Pointing Error Prediction of Space Optical Instruments. European Conference on Spacecraft Structures, Materials & Environmental Testing, 2014 mehr…
  • Reik, Alexander; Lindemann, Udo: Analyzing which technology-related information is required at which stage of product planning: A literature-based approach to integrate technology management into strategic product planning. 20th ICE Conference – IEEE TMC Europe Conference, 2014 mehr…
  • Reik, Alexander; Lindemann, Udo: WHAT DOES INNOVATION STRATEGY REQUIRE FROM TECHNOLOGY MANAGEMENT? AN APPROACH FOR INTEGRATING TECHNOLOGY MANAGEMENT ACTIVITIES INTO STRATEGIC PRODUCT PLANNING. 23rd INTERNATIONAL CONFERENCE FOR THE INTERNATIONAL ASSOCIATION OF MANAGEMENT OF TECHNOLOGY, 2014 mehr…
  • Reik, Alexander; Maurer, Maik: Consideration of Dynamics in Knowledge Prioritization: Preparing an Efficient Company-Internal Knowledge Transfer. Innovation Through Knowledge Transfer 2014, 2014 mehr…
  • Roth M., Kasperek D., Lindemann U.: Identifying the Adequate Level of Abstraction Within Structural Modeling. 2014 IEEE International Systems Conference (SysCon 2014) Proceedings, IEEE, 2014, 301–308 mehr…
  • Roth, Michael; Scholz, Simon; Gövert, Kristin; Kasperek, Daniel; Lozano, Christopher; Mund, Hartwig; Lindemann, Udo: Standardisierungskonzept für Kleinserien im Maschinenund Anlagenbau. Tag des Systems Engineering, Carl Hanser, 2014Tag des Systems Engineering 2014, 361–370 mehr…
  • Roth, Michael; Kasperek, Daniel; Lindemann, Udo: Verifying the Abstraction Level of Structural Models. Conference on Systems Engineering Research (CSER 2014), Elsevier BV, 2014, 497-504 mehr…
  • Sauerer, B.; Schatz, M.; Wehrle, E.; Baier,H.: Multistage Structural Optimization in the Design of the Lightweight Electrical Vehicle VisioM. European Altair Technology Conference, 2014 mehr…
  • Schatz, M.; Baier, H.: Durch Berücksichtigung von Fertigungsaufwänden und numerischer Mehrskalenhomogenisierung zur ganzheitlichen Strukturoptimierung von Flechtstrukturen. NAFEMS, 2014 mehr…
  • Schatz, M.; Baier, H.: Structural optimization of braided structures including soft aspects such as manufacturing effort. Mechanics of Composites, 2014 mehr…
  • Schatz, M.; Baier, H.: An approach toward the incorporation of soft aspects such as manufacturing efforts into structural design optimization. Journal of Mechanics Engineering and Automation (JMEA) Vol. 4, No. 11, 2014 mehr…
  • Schatz, M.; Wehrle, E.; Baier, H.: Structural design optimization of lightweight structures considering material selection and sizing. International Conference on Engineering Optimization, 2014 mehr…
  • Schenkl, Sebastian A.; Elser, Hannes; Nilsson, Susanne; Ölund Sandström, Gunilla; Mörtl, Markus; Srinivasan, Venkataraman: A method for assessing the innovativeness of product-service systems. DS 77: Proceedings of the DESIGN 2014 13th International Design Conference, 2014, 985-994 mehr…
  • Schenkl, Sebastian A.; Rösch, Christian; Mörtl, Markus: Literature study on factors influencing the market acceptance of PSS. 6th CIRP Conference on Industrial Product-Service Systems (IPS2 2014) , 2014 mehr…
  • Schenkl, Sebastian A.; Sauer, Roman M.; Mörtl, Markus: A Technology-centered Framework for Product-Service Systems. 6th CIRP Conference on Industrial Product-Service Systems (IPS2 2014) , 2014 mehr…
  • Schenkl, Sebastian A.; Schmidt, Danilo M.; Schockenhoff, Damian; Maurer, Maik: Knowledge Evaluation for PSS Providers. 6th CIRP Conference on Industrial Product-Service Systems (IPS2 2014) , 2014 mehr…
  • Schenkl, Sebastian A.; Behncke, Florian G. H.; Hepperle, Clemens; Langer, Stefan; Lindemann, Udo: Managing Cycles of Innovation Processes of Product-Service Systems. 2013 IEEE International Conference on Systems, Man and Cybernetics (SMC 2013), IEEE, 2014, 918-923 mehr…
  • Schmid, Lisa-Magdalena; Amereller, Maximilian; Lindemann, Udo: Definition of room functionality for automotive development. Proceedings of the FISITA 2014 World Automotive Congress , 2014 mehr…
  • Schmidt, Danilo Marcello; Bauer, Paul; Mörtl, Markus: Product-Service Systems for Influencing Customer Barriers and Customer Acceptance. International Conference on Business Marketing and Management, IACSIT Press, 2014, 213-217 mehr…
  • Schmidt, Danilo Marcello; Elezi, Fatos; Birth, Paul; Mörtl, Markus: A Literature Review of Irrational Customer Choices at the Point of Sales: Revealing the Need for Integration into Product Design. Academy of World Business, Marketing and Management Development Conference, The Academy of World Business, Marketing, and Management Development, 2014, 329-344 mehr…
  • Schmidt, Danilo Marcello; Schenkl, Sebastian Alexander; Maurer, Maik: Evaluation of Knowledge to Future-Proof the Knowledge Base. Proceedings of the DESIGN 2014 13th International Design Conference, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, 2014, 1863-1872 mehr…
  • Schmidt, Danilo Marcello; Schenkl, Sebastian Alexander; Munkhart, Eduard; Nilsson, Susanne; Mörtl, Markus: Interview Study: Decisions and Decision Criteria for Development in Industry. IEEE - International Conference on Industrial Engineering and Engineering Management, Institute of Electrical and Electronics Engineers, 2014 mehr…
  • Schmidt, Danilo Marcello; Schenkl, Sebastian Alexander; Mörtl, Markus: Matrix-based decision-making for compatible systems in product planning concerning technologies for the reduction of CO2-emissions. DSM Conference, Hanser Verlag, 2014, 107-116 mehr…
  • Schmidt, Danilo Marcello; Urquidi Guerrero, Josu; Michailidou, Ioanna; Lindemann, Udo: Differentiated Customer Needs' Analysis for User Experience. IEEE - International Conference on Industrial Engineering and Engineering Management, Institute of Electrical and Electronics Engineers, 2014 mehr…
  • Schmidt, Michael Timo; Elezi, Fatos; Tommelein, Iris; Berghede, Klas; Lindemann, Udo: Supporting Organizational Design Towards Lean with the Viable System Model. 22 nd ANNUAL CONFERENCE of the INTERNATIONAL GROUP for LEAN CONSTRUCTON , IGLC & Akademika forlag, 2014, 2014UNDERSTANDING AND IMPROVING PROJECT BASED PRODUCTION mehr…
  • Schmidt, Michael Timo; Elezi, Fatos; Tommelein, Iris; Lindemann, Udo: Towards Recursive Plan-Do-Check-Act Cycles for Continuous Improvement. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2014 mehr…
  • Schrieverhofff, Philip: Valuation of Adaptability in System Architecture. Dissertation, 2014 mehr…
  • Schöttl, Florian, Brumeißl David, Lindemann, Udo: Modellierung von Flexibilität in Produktionssystemen - Eine Methode zur Strukturierung von System Lifecycle Properties. Tag des Systems Engineering, Carl Hanser, 2014, 193-202 mehr…
  • Schöttl, Florian; März, Daniel; Lindemann, Udo: Vorgehensweise zur Gestaltung robuster Produktionssysteme am Beispiel der Automobilindustrie. Design for X - Beiträge zum 25. DfX-Symposium, TuTech, 2014, 349-360 mehr…
  • Schöttl, Florian; Paefgen, Max-Christian; Lindemann, Udo: Approach for Measuring Change-Induced Complexity Based on the Production Architecture. 47th CIRP Conference on Manufacturing Systems, Elsevier, 2014, 934-939 mehr…
  • Schöttl, Florian; Lindemann, Udo: Design for System Lifecycle Properties – A Generic Approach for Modularizing Systems. Conference on Systems Engineering Research (CSER 2014), Elsevier BV, 2014, 682-691 mehr…
  • Si, L.; Baier, H.: An Advanced Ensemble Impact Monitoring and Identification Technique for Aerospace Composite Cantilever Structures. European Workshop on Structural Health Monitoring [7., Nantes, 2014], 2014 mehr…
  • Staack, Holger; Seibert, Dominic: On the virtual development of pedestrian protection. International Conference Intelligent Collision Protection and Pedestrian Protection , 2014 mehr…
  • Staack, Holger; Seibert, Dominic; Koukal, Andreas; Baier, Horst: Versuchsbasierte Entwicklung eines industriellen Bruchkriteriums für Kunststoffkomponenten in der Fußgängerschutzauslegung. SIMVEC, 2014 mehr…
  • Tischer, M.; Wehrle, E. J.; Baier, H.: Reduced modeling of crash barriers for design optimization of space frame automobile structures. LS-Dyna Forum, 2014 mehr…
  • Toh, W. X.; Hashemi Farzaneh, H.; Kaiser, M.K.; Lindemann, U.: Analysis of Empirical Studies in Design Research. DESIGN 2014 13th International Design Conference, 2014, 59-70 mehr…
  • Toh, W.X.; Hashemi Farzaneh, H.; Lindemann, U.: Analysis of empirical studies in design research. 13th International Design Conference - Proceedings, Faculty of Mechanical Engineering and Naval Architecture, 2014, 59 - 70 mehr…
  • Ungwattanapanit, T.; Baier, H.: Postbuckling Optimization of Composite Stiffened Fuselage Panels using Steered Fibers. RAeS Aircraft Structural Design Conference [4th., 2014], 2014 mehr…
  • Ungwattanapanit, T.; Baier, H.: Postbuckling Optimization of Composite Stiffened Fuselage Panels using Steered Fibers. RAeS Aircraft Structural Design Conference [4th., 2014], 2014 mehr…
  • Ungwattanapanit, T.; Baier, H.: Postbuckling analysis and optimization of stiffened fuselage panels utilizing variable-stiffness laminates. Congress of the International Council of the Aeronautical Sciences, ICAS [29., 2014, St. Petersburg], 2014 mehr…
  • Wehrle, E. J.; Xu, Q.; Baier, H.: Investigation, optimal design and uncertainty analysis of crash-absorbing extruded aluminum structures. Procedia CIRP, 2014, PP. 27-32 mehr…
  • Wehrle,R.; Baier,H.: Establishing manufacturing effort models to be used in optimization of extruded aluminium profiles under structural and manufacturing criteria. ManuLight, 2014 mehr…
  • Weinzierl, M.: Highly Extensible Skin of a Shape-variable Wing Leading Edge of a High-Perfomance Sailplane. OSTIV Congress [8, 2014, Leszno], 2014 mehr…
  • Weinzierl, M.; Schatz, M.; Antonelli, V.; Baier, H.: A Study of the Structural Dynamics of CFRP Chopper Disks. SAMPE Europe [9, 2014, Tampere], 2014 mehr…
  • Wickel, Martina; Chucholowski, Nepomuk; Behncke, Florian; Lindemann, Udo: Comparison of Seven Company-Specific Engineering Change Processes. Modelling and Management of Engineering Processes , Springer Berlin Heidelberg, 2014Proceedings of the 3rd International Conference 2013, 125-136 mehr…
  • Wickel, Martina; Langer, Stefan; Chucholowski, Nepomuk; Lindemann, Udo: A categorization and visualization scheme to determine Engineering Change Effects in companies. International Conference on Advanced Design Research and Education 2014, 2014, 94-99 mehr…
  • Wickel, Martina; Lindemann, Udo;: A Retrospective Analysis of Engineering Change Orders to Identify Potential for Future Improvements. Proceedings of NordDesign 2014, 2014, 692-701 mehr…
  • Wolfenstetter, Thomas; Kernschmidt, Konstantin; Münzberg, Christoph; Kammerl, Daniel; Goswami, Suparna; Lindemann, Udo; Vogel-Heuser, Birgit; Krcmar, Helmut: Supporting the cross-disciplinary development of product-service systems through model transformations. IEEE International Conference on Industrial Engineering and Engineering Management, 2014 mehr…
  • da Rocha-Schmidt, L.; Baier, H.: A Shape Variable Gap Cover Concept for Aerodynamic Control Surfaces Based on Shear Deformation. 63. Deutscher Luft- und Raumfahrtkongress, 2014 mehr…
  • da Rocha-Schmidt, L.; Hermanutz, A.; Baier, H.; Seitz, A.; Bijewitz, J.; Isikveren, A. T.; Scarpa3, F.; Allegri, G.; Remillat, C.; Feuilloley, E.; Majic, F.; O’Reilly, C.; Efraimsson, G.: Progress Towards Adaptive Aircraft Engine Nacelles. 29th Congress of the International Council of the Aeronautical Sciences, 2014 mehr…
  • von Saucken, C; Lachner, F; Lindemann, U: Principles for User Experience: What We Can Learn from Bad Examples. International Conference on Kansei Engineering & Emotion Research, Linköping University, 2014 mehr…
  • von Saucken, C; Michailidou, I; Kremer, S; Lindemann, U: Motive-Oriented Design: Helping Automobile Engineers to Take the User's Perspective! Design, User Experience, and Usability, Springer, 2014DUXU 2014, 370-377 mehr…
  • von Saucken, C; Schenkl, Sebastian; Dahlmann, Patrick; Maurer, Maik: Measures and Methods for Systematic Knowledge Management. 13th International DESIGN Conference, Design Society, 2014, 1925-1936 mehr…
  • von Saucken, Constantin; Gomez, Rafael: Unified Usre Experience Model: Enabling a More Comprehensive Understanding of Emotional Experience Design. 9th International Conference on Design & Emotion, Universidad de los Andes, 2014, 631-640 mehr…
  • von Saucken, Constantin; Lindemann, Udo: User-Centered Design for Research: Following Our Own Recommendations. International Conference on Advanced Design Research and Education, 2014, 118-122 mehr…
  • Ölmez M.; Lindemann U.: Decision-Maker Modeling for Decision Support Application. DSS 2.0 - Supporting Decision Making with New Technologies (Frontiers in Artificial Intelligence and Applications 261), IOS Press, 2014, 429-440 mehr…
  • Ölmez, Manuela; Lindemann, Udo: Managing Attribute Complexity for User-centered Decision Support Systems. Conference on Systems Engineering Research (CSER 2014), Elsevier BV, 2014, 130-137 mehr…

2013

  • Scheurmann, Elke; Maurer, Maik; Schmidt, Danilo; Lindemann, Udo: Reducing risk in innovation. , Proceedings of the 15th International DSM Conference. Carl Hanser Verlag, 2013 mehr…
  • Method and device for lessening the consequences of an accident on a vehicle occupant. 2013, 2013_Zimmermann2013_PatentUS8442726_DeviceLesseningTheConsequences.pdf (anderer Eintrag) mehr…
  • Antonelli, V.; Lohstroh, W.; Baier, H.: Feasibility study on a very large chopper disk for a TOF-TOF spectrometer. ICCM 19 2013 Montreal, Canada, 2013 mehr…
  • Baier, H.: Adaptive Strukturen. In: Handbuch der Luftfahrttechnik, Kap. 4.6, S. 4119-4126. Hanser Verl. 2013, München, 2013 mehr…
  • Baier, H.; Datashvili, L.; Endler, S.; Rose, S.; Stockman, Y.; Rodrigues, G.: Large deployable telescopes - also for µm-wavelengths? CEAS Space Journal 2013, 2013 mehr…
  • Bauer, Wolfgang; Elezi, Fatos; Homann, Florian; Maurer, Maik: The Identification of Limiting and Enabling factors of the Organization on the Development of Platform-based Products. International Conference on Industrial Engineering and Engineering Management (IEEM) 2013, 2013 mehr…
  • Bauer, Wolfgang; Elezi, Fatos; Maurer, Maik: An Approach for Cycle-Robust Platform Design. 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • Bauer, Wolfgang; Elezi, Fatos; Maurer, Maik: Application of DSMs for Analyzing Product and Organizational Structures. 15th International Dependency and Structure Modelling Conference, DSM 2013, Carl Hanser, 2013, 11-18 mehr…
  • Behncke, F. G. H.; Ehrhardt, J.; Lindemann, U.: Models for the optimization of supply chains - a literature review. International Conference on Industrial Engineering and Engineering Management (IEEM) 2013, 2013 mehr…
  • Behncke, Florian G. H.; Kübel, Teresa; Lindemann, Udo: Supplier Evaluation based on a Product’s Architecture. 15th International Dependency and Structure Modelling Conference, DSM 2013, Carl Hanser, 2013, 89-96 mehr…
  • Behncke, Florian; Mauler, Stefan; Lindemann, Udo; Mbang, Sama; Holstein, Manuel; Kalmbach, Hansjörg: Supporting the decision process of engineering changes through the computational process synthesis. International Conference on Research into Design ICoRD'13, Springer India, 201307.-09.01.2013 mehr…
  • Chucholowski, Nepomuk; Langer, Stefan; Behncke, Florian G. H.; Lindemann, Udo: Comparison of engineering change cause analysis in literature and industrial practice. 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • Chudy, P.; Vlk, J.; Leitao, M.; Stroscher, F.: Evoution-driven Controller Design for an Aeroservoelastic Aircraft Model. AIAA MST (Modeling and Simulation Technologies Conference), 2013 mehr…
  • Datashvili, L.: Foldability of hinged-rod systems applicable to deployable space structures. CEAS Space Journal (5), 2013, S. 157 - 168 mehr…
  • Datashvili, L.; Endler, S.; Wei, B.; Baier, H.; Langer, H.; Friemel, M.; Tsignadze, N.; Santiago-Prowald, J.: Study of mechanical architectures of large deployable space antenna apertures: from design to tests. CEAS Space Journal (5), 2013, S. 169-184 mehr…
  • Ehrlenspiel, Klaus; Meerkamm, Harald: Integrierte Produktentwicklung - Denkabläufe, Methodeneinsatz, Zusammenarbeit. Carl Hanser (5., überarbeitete und erweiterte Auflage. Aufl.), 2013 mehr…
  • Elezi, F.; Maier, Th. G.; Lindemann, U.: Engineering Change Management Challenges and Management Cybernetics. 2013 IEEE International Systems Conference (SysCon 2013), 201315.-18.04.2013, 567-573 mehr…
  • Elezi, Fatos; Resch, David; Tommelein, Iris D.; Lindemann, Udo: Improving Organizational Design and Diagnosis by Supporting Viable System Model Application with Structural Complexity Management. 15th International Dependency and Structure Modelling Conference, DSM 2013, Carl Hanser, 2013, 133-140 mehr…
  • Elezi, Fatos; Schmidt, Michael; Tommelein, Iris D.; Lindemann, U.: Enhanced Viability in Organizations: An Approach to Expanding the Requirements of the Viable System Model. International Conference on Industrial Engineering and Engineering Management (IEEM) 2013, 2013 mehr…
  • Fender, Johannes; Duddeck, Fabian; Zimmermann, Markus: On the calibration of simplified vehicle crash models. Structural and Multidisciplinary Optimization 49 (3), 2013, 455-469 mehr…
  • Friemel, M.; Baier, H.: Verbundvorhaben: Höchstinnovative Satkom-Strukturen mit erhöhten thermischen und elektromagnetischen Eigenschaften (HISST2), Schlussbericht zum BMWF Förderkennzeichen 50 YB 1122. BMWF, 2013, mehr…
  • Gmeiner, T.; Shea, K.: An Ontology for the Autonomous Reconfiguration of a Flexible Fixture Device. Journal of Computing and Information Science in Engineering 13 (2), 2013, 11 mehr…
  • Gmeiner, Thomas; Shea, Kristina: A Spatial Grammar for the Computational Design Synthesis of Vise Jaws. ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2013), American Society of Mechanical Engineers, 2013 mehr…
  • Guertler, Matthias R.; Lewandowski, Paulina; Klaedtke, Kevin; Lindemann, Udo: Can Stakeholder-Analysis support Open Innovation? The 6th ISPIM Innovation Symposium – Innovation in the Asian Century, 2013Actors analysis; innovation actors; Lead User; Open Innovation; product development; requirements; stakeholder analysis mehr…
  • Gürtler, Matthias R.: Open Innovation Interview-Studie 2012. CiDaD Working Paper Series 9 (1), 2013, 1-21 mehr…
  • Gürtler, Matthias R.; Lindemann, Udo: Situative Open Innovation - A model for selecting the right external actors and involving them in an efficient way. 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • Gürtler, Matthias R.; Lindemann, Udo: Using Boolean Operators for modeling complex logical dependencies in matrices. 15th International Dependency And Structure Modelling Conference, DSM 2013, Carl Hanser, 2013, 117-123 mehr…
  • Gürtler, Matthias R.; Münzberg, Christopher; Lindemann, Udo: Idea in a bottle – A new method for creativity in Open Innovation. ICCC 2013 - The Fourth International Conference on Computational Creativity, 201312. - 14.06.2013, 194 - 197 mehr…
  • Gürtler, Matthias Rudolf; Kain, Andreas; Lindemann, Udo: Bridging the gap: From Open Innovation to an Open Product-Life-Cycle by using Open-X methodologies. International Conference on Research into Design ICoRD'13, 201307.-09.01.2013 mehr…
  • Gürtler, Matthias; Kortler, Sebastian; Helms, Bergen; Berkovich, Marina; Leimeister, Jan Marco; Krcmar, Helmut; Shea, Kristina; Lindemann, Udo; Maurer, Maik: Von Anforderungslisten zum konzeptionellen Design – Funktionsbasierte Analyse von Anforderungen an Product-Service Systems – 5. In: Thomas, Oliver; Nüttgens, Markus (Hrsg.): Dienstleistungsmodellierung 2012. Springer Fachmedien Wiesbaden, 2013, 96-113 mehr…
  • Hashemi Farzaneh, Helena; Kaiser, Katharina: Influence of communication elements and cognitive effects on creative solution search in groups. 19th International Conference on Engineering Design (ICED13), 2013 mehr…
  • Hashemi Farzaneh, Helena; Kaiser, Maria Katharina; Metzler, Torsten; Lindemann, Udo: Cross-disciplinary approaches – indications of a student design project. International Conference on Research into Design ICoRD'13, Springer India, 201307.-09.01.2013, 1151-1163 mehr…
  • Hashemi Farzaneh, Helena; Reik, Alexander U.; Maurer, Maik: Development of a Knowledge Mapping Approach for Independent Knowledge Elicitation and Representation. InImpact: The Journal of Innovation Impact 5 (1), 2013, 43-53 mehr…
  • Hellenbrand, David: Transdisziplinäre Planung und Synchronisation mechatronischer Produktentwicklungsprozesse. Dissertation, 2013 mehr…
  • Helms, Bergen: Object-Oriented Graph Grammars for Computational Design Synthesis. Dissertation, 2013 mehr…
  • Helms, Bergen; Schultheiß, Hansjörg; Shea, Kristina: Automated Mapping of Physical Effects to Functions Using Abstraction Ports Based on Bond Graphs. Journal of Mechanical Design 135 (5), 2013, 12 mehr…
  • Hepperle, Clemens: Planung lebenszyklusgerechter Leistungsbündel. Dissertation, 2013 mehr…
  • Herberg, A.; Lindemann, U.: A different view on system decomposition – subsystem-centered property evaluation in multiple supersystems. Complex Systems Design & Management Conference CSD&M 2013 – CEUR Workshop, 2013, 153 - 164 mehr…
  • Herzberger, Philipp; Behncke, Florian G. H.; Schenkl, Sebastian; Lindemann, Udo: Interactive Modeling and Evaluation of Product-Service-Systems. 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • Ilie, Delia: Systematisiertes Ziele- und Anforderungsmanagement in der Fahrzeugentwicklung. Dissertation, 2013 mehr…
  • Kaiser, Maria Katharina; Hashemi Farzaneh, Helena; Lindemann, Udo: BIOscrabble - Extraction of Biological Analogies out of Large Text Sources. IC3K 2013 - 5th International Joint Conference on Knowlwdge Discovery, Knowledge Engineering and Knowledge Management, 2013, 10-20 mehr…
  • Kammerl, Daniel; Gast, Dominik; Orawski, Robert; Schenkl, Sebastian Alexander; Mörtl, Markus: Analysis of Product-Service System models as a basis for a modeling framework. 16th International Conference on Quality and Service Sciences (QMOD-ICQSS), 2013, 906-915 mehr…
  • Kasperek, Daniel; Kohn, Andreas; Maurer, Maik: Identifying Uncertainties within Structural Complexity Management. 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • Kasperek, Daniel; Maurer, Maik: Coupling Structural Complexity Management and System Dynamics to represent the Dynamic Behavior of Product Development Processes. 2013 IEEE International Systems Conference (SysCon 2013), 201315.-18.04.2013, 414-419 mehr…
  • Kasperek, Daniel; Peters, Konrad; Maisenbacher, Sebastian; Maurer, Maik: Development of an Assessment Procedure for the Problem-Specific Selection of Most Suitable Modeling Methods for Complex Systems. International Conference on Industrial Engineering and Engineering Management (IEEM) 2013, 2013 mehr…
  • Kasperek, Daniel; Steenweg, Ragna; Maisenbacher, Sebastian; Füller, Kathrin Jasmin; Krcmar, Helmut; Maurer, Maik: Representing Ontologies in Multiple Domain Matrices. International Conference on Industrial Engineering and Engineering Management (IEEM) 2013, 2013 mehr…
  • Kernschmidt, Konstantin; Wolfenstetter, Thomas; Münzberg, Christopher; Kammerl, Daniel; Goswami, Suparna; Lindemann, Udo; Krcmar, Helmut; Vogel-Heuser, Birgit: Concept for an Integration-Framework to enable the crossdisciplinary Development of Product-Service Systems. International Conference on Industrial Engineering and Engineering Management (IEEM) 2013, 2013 mehr…
  • Kirner, K.G.M.; Lindemann, U.: Assessing the Performance of Product Development Processes in a Multi-project Environment in SME. International Conference on Research into Design ICoRD'13, 201307.-09.01.2013 mehr…
  • Kirner, K.G.M.; Siyam, G.I.; Lindemann, U.; Wynn, D.C.; Clarkson, P.J.: Information in Lean Product Development – Assessment of Value and Waste. International Conference on Research into Design ICoRD'13, 201307.-09.01.2013 mehr…
  • Kohn, Andreas; Hollauer, Christoph; Huber, Michael; Lindemann, Udo: Assistentensystem zur Unterstützung der projektspezifischen Arbeit mit Produktmodellen. Stuttgarter Symposium für Produktentwicklung, 2013 mehr…
  • Kohn, Andreas; Lindemann, Udo; Maurer, Maik: Knowledge base for supporting the handling of product models in engineering design. 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • Kohn, Andreas; Reif, Julia; Wolfenstetter, Thomas; Kernschmidt, Konstantin; Goswami, Suparna; Krcmar, Helmut; Brodbeck, Felix; Vogel-Heuser, Birgit; Lindemann, Udo; Maurer, Maik: Improving common model understanding within collaborative engineering design research projects. International Conference on Research into Design ICoRD'13, 201307.-09.01.2013, 643-654 mehr…
  • Lichtenberg, Christian; Kasperek, Daniel; Maisenbacher, Sebastian; Maurer, Maik: Strukturbasierte Modellierung und Bewertung von Entwicklungsprozessen von Produkt-Service Systemen. Tag des Systems Engineering 2013, 2013 mehr…
  • Maier, Th. G.; Elezi, F.; Lindemann, U.: A Snapshot Approach for Applying the Viable System Model in Management Systems. 2013 IEEE International Systems Conference (SysCon 2013), 201315.-18.04.2013, 431-436 mehr…
  • Maisenbacher, S.; Behncke, F. G. H.; Lindemann, U.: Model for Integrated Value Engineering. International Conference on Industrial Engineering and Engineering Management (IEEM) 2013, 2013 mehr…
  • Maisenbacher, S.; Kernschmidt, Konstantin; Kasperek, Daniel; Vogel-Heuser, B.; Maurer, M.: Using DSM and MDM Methodologies to Analyze Structural SysML Models. International Conference on Industrial Engineering and Engineering Management (IEEM) 2013, 2013 mehr…
  • Maurer, M.; Maisenbacher, S.: Modeling and Analyzing Systems in Application. ICoRD'13 - Global Product Development, International Conference on Research into Design, Springer, 20137.-9.1.2013, 707-719 mehr…
  • Metzler, Torsten: Die kognitive Schreibtischlampe "Gertie" zeigt Emotionen. CiDaD News 13 (2), 2013, 1 mehr…
  • Metzler, Torsten; Jowers, Iestyn; Kain, Andreas; Lindemann, Udo: Development of Cognitive Products via Interpretation of System Boundaries. International Conference on Research into Design ICoRD'13, Springer India, 201307.-09.01.2013, 163-174 mehr…
  • Metzler, Torsten; Lindemann, U.: Improving the Development of Companion Robots for Elderly Care by Integrating Meaningful Cognitive Functions. International Conference on Social Robotics, 2013, 1-6 mehr…
  • Metzler, Torsten; Mosch, Michael; Lindemann, Udo: Meta-Design Catalogs for Cognitive Products. International Conference on Research into Design ICoRD'13, Springer India, 201307.-09.01.2013, 303-316 mehr…
  • Metzler, Torsten; Schmid, Hendrik; Lindemann, Udo: Bewertungsmethodik zur systematischen Integration kognitiver Funktionen in Produkte. Stuttgarter Symposium für Produktentwicklung 2013, Fraunhofer Verlag, 201320.06.2013 mehr…
  • Michailidou, Ioanna; von Saucken, Constantin; Lindemann, U.: How to create a UX story. HCI International 2013: Design, User Experience and Usability. Web, Mobile and Product Design, Springer, 2013 mehr…
  • Michailidou, Ioanna; von Saucken, Constantin; Lindemann, U.: Extending product specification with emotional aspects: Introducing User Experience Stories. 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • Nies, Benedikt Johannes; Orawski, Robert; Lindemann, Udo: Customer focused requirement engineering and system design for plug-in hybrid electric vehicles (PHEV). 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • Orawski, Robert; Hein, Christoph; Polenov, Dieter; Holle, Maik; Schenkl, Sebastian; Mörtl, Markus; Lindemann, Udo: Reuse of Requirements: An Approach with a Generic Requirements Pool. 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • Reik, Alexander U.; Hashemi Farzaneh, H.; Maurer, Maik: Identifikation und Transfer von Wissen: Ein Fall für Social Media? nowTech 2013 - Kongress für Wissensmanagement und Social Media, 2013 mehr…
  • Reik, Alexander U.; King, Moritz; Lindemann, Udo: Investigation of the Information Generated by Technology Management Tools and Links to Strategic Product Planning Stages. International Conference on Industrial Engineering and Engineering Management (IEEM) 2013, 2013 mehr…
  • Roth, Michael; Kasperek, Daniel; Lindemann, Udo: Functional Analysis and Modeling of Complex, Evolutionary Grown, Mechatronic Products. International Conference on Industrial Engineering and Engineering Management (IEEM) 2013, 2013 mehr…
  • Santiago Prowald, J.; Baier, H.: Advances in large apertures for space. CEAS Space Journal, POI 10.1007/s 12567-013-0048-3 2013, 2013 mehr…
  • Schatz, M.; Both, J.; Baier, H.: Experimental and numerical investigation of the stress-free temperature in CFRP and hybrid CFRP-metal composites. SEICO 13 2013, Paris, 2013 mehr…
  • Schenkl, Sebastian A.; Bruse, Florian; Lindemann, Udo: Wissensgetriebene Entwicklung nachahmungsrobuster Produkt-Service Systeme. Stuttgarter Symposium für Produktentwicklung 2013, Fraunhofer Verlag, 201320.06.2013 mehr…
  • Schenkl, Sebastian Alexander; Schneider, Franz-Xaver; Kammerl, Daniel; Orawski, Robert; Hutterer, Philipp; Mörtl, Markus: Methodical Deployment of Quality Criteria. 16th International Conference on Quality and Service Sciences (QMOD-ICQSS), 2013, 1576-1586 mehr…
  • Schenkl, Sebastian Alexander; Spörl, Sebastian; Behncke, Florian G. H.; Orawski, Robert; Mörtl, Markus: Deploying decision criteria in a cyclical decision process for the product planning phase. 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • Schiller, M.; Weißmann, M.; Mörtl, M.: Evaluierung von Kosteneinsparpotential in hochautomatisierten Produktionsanlagen. CiDaD News 10 (1), 2013, 9-10 mehr…
  • Schmidt, D. M.; Schenkl, S. A.; Wickel, M. C.; Braun, M.; Maurer, M.: Intepreting Knowledge Maps Using Structural Criteria. 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • Schmidt, D. M.; Schenkl, S. A.; Wickel, M. C.; v. Saucken, C.; Maurer, M.: Multiple-Domain Matrices and Knowledge Maps for Visualizing Knowledge-Driven Scenarios. 15th International Dependency and Structure Modelling Conference, DSM 2013, Carl Hanser, 2013, 55-62 mehr…
  • Schrieverhoff, Phillip; Lindemann, Udo: Managing a methodology-development requirement-process – Best practices and lessons learned. 19th International Conference on Engineering Design 2013 (ICED13), Seoul, Korea, 2013 mehr…
  • Schröer, Bernhard Karl Georg: Lösungskomponente Mensch – Nutzerseitige Handlungsmöglichkeiten als Bausteine für die kreative Entwicklung von Interaktionslösungen. Dissertation, 2013 mehr…
  • Schöttl, F.; Herrmann, N.; Maurer, M.; Lindemann,U.: Systematic Procedure for Handling Complexity in the Automotive Production. 5th International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV2013), Springer, 2013, 255-260 mehr…
  • Schöttl, Florian; Bauer, Wolfgang; Lindemann, Udo: Design for System Lifecycle Properties – Support of Planning Processes by Modularization of Stakeholder Networks. 15th International Dependency and Structure Modelling Conference, DSM 2013, Carl Hanser, 2013, 125-132 mehr…
  • Scialino, L.; Ihle,A.; Migliorelli, M.; Gatti, N.; Datashvili, L.; van´t Klooster, K.; Prowald, J.S.: Large deployable reflectors for telecom and earth observation application. CEAS Space Journal (5), 2013, S. 125-146 mehr…
  • Si, L.; Chen, Z.; Baier, H.: Real-time health monitoring on impact identification of composite structures with distributed built-in sensor network. SPIE Smart Structures / NDE 2013, San Diego, 2013 mehr…
  • Sop Njindam, T.; Metzler, Torsten; Lindemann, U.; Paetzold, Kristin: A Model-Based Assessment for the Solution Space of a Cognitive Coffee Robot Waiter. Complex Systems Design & Management Conference CSD&M 2013 – CEUR Workshop, 2013, 45 - 57 mehr…
  • Steinhaeusser, Tobias; Elezi, Fatos; Tommelein, Iris D.; Lindemann, Udo: Management Cybernetics as a Theoretical Basis for Lean Thinking. 21st International Group for Lean Construction (IGLC) Conference, 2013, 53-62 mehr…
  • Ungwattanapanit, T.; Zhang, Y.; Baier, H.: Hybrid-Stiffness Laminated Fuselage Panels with Window Cutouts Optimized under Stability and Strength Constraints. CCS 17 2013, Porto, 2013 mehr…
  • Wagner, D.; Staack, H.; Klaus, ; Krampe, E.; Wintermantel, E.: Systematic Design Approach for FRP and Multi-Material Crash Concepts in Electric Energy Storage Systems of Hybrid Electric Vehicles. Polymer Processing Society 29th Annual Meeting (PPS-29) 2013, Nürnberg, 2013 mehr…
  • Wehrle, E.: Design optimization of lightweight structures for electrical vehicles including crashworthiness. Leichtbau-Colloquium 2013, Landshut, 2013 mehr…
  • Wehrle, E.; Sauerer, B.; Schatz, M.; Baier, H.: Towards comprehensive structural optimization models and techniques for hybrid material car bodies. Conference on Future Automobile Technology 2013, Garching bei München, 2013 mehr…
  • Wehrle, R.; Ziegler, M.; Baier, H.: Contour optimization of extruded aluminium profile cross-sections, taking into account structural mechanics and manufacturing aspects. 10th World Congress on Structural and Multidisciplinary Optimization 2013, Orlando, 2013 mehr…
  • Wei, B.; Magner, D.; Endler, S.; Datashvili, L.: High precision large space structures: challenges in cable networks design. International Conference on Textile Composites and Inflatable Structures, Structural Membranes, CIMNE 2013, München, 2013 mehr…
  • Wickel, M.; Schenkl, S. A.; Schmidt, D. M.; Hense, J.; Mandl, H.; Maurer, M.: Knowledge structure maps based on Multiple Domain Matrices. InImpact: The Journal of Innovation Impact 5, 2013, 5 - 16 mehr…
  • Wickel, Martina Carolina; Behncke, Florian G. H.; Lindemann, Udo: When to check for deviations in the design process - an approach to determine a systematic checkpoint schedule. 19th International Conference on Engineering Design 2013 (ICED13), 2013 mehr…
  • Xu,Q.; Wehrle,E.; Baier,H.: Knowledge-Based Surrogate Modeling in Engineering Design Optimization – Applications in Engineering. Springer, 2013 mehr…
  • Zimmermann, Markus; von Hoessle, Johannes Edler: Computing solution spaces for robust design. International Journal for Numerical Methods in Engineering 94 (3), 2013, 290-307 mehr…
  • da Rocha-Schmidt, L.; Baier, H.: Morphing Skins and Gap Covers for Aerodynamic Control Surfaces. Deutscher Luft- und Raumfahrtkongress, 2013 mehr…
  • von Saucken, Constantin; Michailidou, Ioanna; Lindemann, Udo: Emotional Mental Model. International Conference on Industrial Engineering and Engineering Management (IEEM) 2013, 2013 mehr…
  • von Saucken, Constantin; Michailidou, Ioanna; Lindemann, Udo: How to Design Experiences: Macro UX versus Micro UX Approach. HCI International 2013: Design, User Experience and Usability. Web, Mobile, and Product Design, Springer, 2013 mehr…
  • von Saucken, Constantin; Reinhardt, Jakob; Michailidou, Ioanna; Lindemann, Udo: Principles for User Experience Design – Adapting the TIPS Approach for the Synthesis of Experiences. 5th International Congress of International Association of Societies of Design Research, IASDR 2013, 2013, 713 - 722 mehr…
  • Ölmez, M.; Schandera, M.; Kissel, M.; Lindemann, U.: Using Decision Classification Criteria for Knowledge Acquisition and Transfer in Multi-Perspective Decision Making Processes. International Conference on Innovation through Knowledge Transfer InnoKT 2013, The Journal of Innovation Impact, 201311.-12.04.2013, 17 - 30 mehr…

2012

  • Onishi, M.; Maurer, M.; Kirner, K.G.M.; Lindemann, U. (Hrsg.): 14th International DSM Conference - Gain competitive advantage by managing complexity. International DSM Conference. Hanser, 2012 mehr…
  • Gausemeier, Jürgen; Glatz, R.; Lindemann, U. (Hrsg.): Präventiver Produktschutz - Leitfaden und Anwendungsbeispiele. Hanser, 2012 mehr…
  • Antonelli,V.; Wedekind,M.; Krämer,L.; Baier,H.: The Effect of Production on the efficiency of CFRP Chopper Discs for Time of Flight (TOF) Spectroscopy. SEICO 12 2012, Paris, 2012 mehr…
  • Baier, H.; Datashvili, L.; Endler, S.: Large Deployable Reflectors - also for sub-µm-wavelengths. Proceedings of the ESA/ESTEC Antenna Workshop 2012, Noordwijk, The Netherlands, 2012 mehr…
  • Baier,H.: High Precision Adaptive and Morphing Structures. CIMTEC 2012, Montecassini, Italy, 2012 mehr…
  • Baier,H.; Rapp,S.: Compensation of residual stress induced shape errors in precision structures. European Conference on Spacecraft Structures, Materials & Environmental Testing 2012, Noordwijk, The Netherlands, 2012 mehr…
  • Baier,H.; Stroscher,F.; Maucher,C.: Elasto-Dynamic Control and Load Alleviation in Components excited by unsteady Air flow. International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2012, Honolulu, 2012 mehr…
  • Bauer, Wolfgang; Biedermann, Wieland; Helms, Bergen; Maurer, Maik: A Student Laboratory for Systems Engineering - Teaching Systems Engineering to Students Without Previous SE-Knowledge Based on an Industry-Oriented Example. IEEE International Systems Conference, 201219-22.03.2012, 665 - 670 mehr…
  • Bauer, Wolfgang; Elser, Hannes; Lindemann, Udo: A matrix-based approach for a qualitative assessment of system architecture specific processes regarding efficiency. 14th International DSM Conference, Hanser, 201213.-14.09.2012, 155-160 mehr…
  • Behncke, Florian G. H.; Wickel, Martina; Lindemann, Udo: Managing the economic performance of research-driven initiatives in the field of transdisciplinary research. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 201210.-13.12.2012 mehr…
  • Biedermann, W.; Diepold, K. J.; Lindemann, U.; Lohmann, B.: Delimiting Structural and Dynamical System Analysis in Engineering Management. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 1649-1654 mehr…
  • Biedermann, W.; Lindemann, U.: Correlation of Structural Characteristica of Product Design Structure Matrices. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 1657- 1666 mehr…
  • Both, J.; Baier, H.: Mode I delamination of hybrid CFRP-metal laminates. Int. Conf. on Composite Materials, 2012 mehr…
  • Both,J.; Wedekind,M.; Baier,H.: "Simulation and experimental characterization of the bearing behavior of CFRP-metal laminates". ECCM 15 (15th European Conference on Composite Materials) 2012, Venedig, 2012 mehr…
  • Crone, J.; Rosemann, B.; Mörtl, M.: Recyclinggerechtes Konstruieren. In: Steinhilper, R.; Rieg, F. (Hrsg.): Handbuch Konstruktion. Carl Hanser, 2012, 487-509 mehr…
  • Daniilidis, Harrys; Bauer, Wolfgang; Eben, Katharina; Lindemann, U.: Compendium for modular and platform based architecting. Conference on Systems Engineering Research (CSER), Elsevier, 201219-22.03.2012 mehr…
  • Daniilidis, Harrys; Bauer, Wolfgang; Eben, Katharina; Lindemann, U.: Systematic goal definition for complexity management projects. IEEE International Systems Conference, Verlagsname, 201219-22.03.2012 mehr…
  • Datashvili, L.: Foldability Aspects of hinged-rod Systems applicable to the Deployable Space Structures. Proceedings of the ESA/ESTEC Antenna Workshop 2012, Noordwijk, Netherlands, 2012 mehr…
  • Datashvili, L.; Endler, S.; Baier, H.; Langer, H.; Friemel, M.; Tsignadze, N.Santiago-Prowald, J.: Study of Mechanical Architectures of Large Deployable Space Antenna Apertures: From Design to Tests. Proceedings of the ESA/ESTEC Antenna Workshop, 2012 mehr…
  • Datashvili,L.; Langer,H.; Endler,S.; Wei,B.; Tsignadze,N.: "Mechanical Architectures of Large Precision Space Apertures". Proc. European Conference on Spacecraft Structures, Materials & Environmental Testing 2012, Noordwijk, 2012 mehr…
  • Empl, D.; Wehrle, R.; Trapani, M.; Pleißner, M.; Plötner, K.; Hofheinz, N.; Baier, H.: Panoramic Passenger Windows Applied to Transport Aircraft. 3rd Aircraft Structural Design Conference 2012, 2012 mehr…
  • Endler,S.; Baier,H.; Datashvili,L.: Nano-fillers in fiber reinforced polymers for performance enhancement of satellite structures. European Conference on Spacecraft Structures, Materials & Environmental Testing 2012, Noordwijk, Netherlands, 2012 mehr…
  • Ertelt, Christoph: Generative Design-to-Fabrication Automation using Spatial Grammars and Heuristic Search. Dissertation, 2012 mehr…
  • Friemel,M.; Perterer,M.; Baier,H.: Experimental characterization of dimensionally stable composite materials and components. Proceedings: 3rd Zwick Academia Day, p. 49-64, 2012, München, 2012 mehr…
  • Fuchs,S.; Wehrle,E.; Matz,S.; Lienkamp,M.: MUTE - ein effizientes und marktfähiges Elektrofahrzeug durch intelligenten Leichtbau. 5. Symposium Faszination Karosserie und Fahrzeugkonzepte 2012, Wolfsburg, 2012 mehr…
  • Gausemeier, Jürgen; Lanza, Gisela; Lindemann, U.: Produkte und Produktionssysteme integrativ konzipieren: Modellbildung und Analyse in der frühen Phase der Produktentstehung. Carl Hanser Verlag (1. Auflage. Aufl.), 2012 mehr…
  • Hashemi Farzaneh, H.; Kaiser, M. K.; Schröer, B.; Srinivasan, V.; Lindemann, U.: Evaluation of Creativity - Structuring Solution Ideas Communicated in Groups Performing Solution Search. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 1871- 1870 mehr…
  • Hashemi Farzaneh, Helena; Kaiser, Maria Katharina; Lindemann, Udo: Creative processes in groups - relating communication, cognitive processes and solution ideas. The 2nd International Conference on Design Creativity (ICDC2012), The Design Society, 201218.-20.09.2012, 13-22 mehr…
  • Hellenbrand, D.; Mörtl, M.; Lindemann, U.: Bewertung von Entwicklungskosten. In: Gausemeier, J.; Lanza, G.; Lindemann, U. (Hrsg.): Produkte und Produktionssysteme integrativ konzipieren – Modellbildung und Analyse in der frühen Phase der Produktentstehung. Carl Hanser, 2012, 125-137 mehr…
  • Helms, Bergen; Shea, Kristina: Computational Synthesis of Product Architectures Based on Object-Oriented Graph Grammars. Journal of Mechanical Design 134 (2), 2012, 021008-1 - 021008-14 mehr…
  • Helten, K.; Lindemann, U.: Structural Modelling and Analysis of Organizational Change During Lean Development Implementation. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 51-60 mehr…
  • Herberg, Arne; Lindemann, Udo: Supporting system architecture assessment by two-level functional modeling: Process oriented analysis and comparison of large-scale systems. 2012 IEEE International System Conference (SysCon 2012), IEEE Service Center, 201219.-22.03.2012, 296-303 mehr…
  • Hoisl, Frank: Visual, Interactive 3D Spatial Grammars in CAD for Computational Design Synthesis. Dissertation, 2012 mehr…
  • Ihle, A.; Breunig, E.; Datashvili, L.; Migliorelli, M.; Scialino, L.; van´t Klosters, K.; Santiago-Prowald, J.: Large Deployable Reflector Technologies For Future European Telecom and Earth Observation Missions. Proceedings of the ESA/ESTEC Antenna Workshop, 2012 mehr…
  • Ihle,A.; Breunig,E.; Datashvili,L.; Migliorelli,M.; Scialino,L.; van´t Klosters,K.; Santiago-Prowald,J.: Large Deployable Reflector Technolgies for Future European Telecom and Earth Observation Missions. Proc. European Conference on Spacecraft Structures, Materials & Environmental Testing 2012, Noordwijk, 2012 mehr…
  • Kain, A.; Kirschner, R.; Lindemann, U.: Utilization of Outside -In Innovation Input for Product Development. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 191-200 mehr…
  • Kaiser, M. K.; Hashemi Farzaneh, H.; Lindemann, U.: An Approach to Support Searching for Biomimetic Solutions Based on System Characteristics and its Environmental Interactions. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 969-978 mehr…
  • Kesper, Heiner: Gestaltung von Produktvariantenspektren mittels matrixbasierter Methoden. Dissertation, 2012 mehr…
  • Kirschner, Rafael Johannes: Methodische Offene Produktentwicklung. Dissertation, 2012 mehr…
  • Kissel, M.; Bradford, N.; Kreimeyer, M.; Lindemann, U.: Product Structure Management as the Backbone of Engineering Design: Exploration of a Reference Model. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 1709- 1718 mehr…
  • Kissel, M.; Schrieverhoff, P.; Lindemann, U.: Design for Adaptability – Identifying Potential for Improvement on an Architecture Basis. NordDesign, 201222.-24.08.2012 mehr…
  • Kohn, A.; Lutter-Günther, M.; Hagg, M.; Maurer, M.: Handling Product Information- Towards an Improved Use of Product Models in Engineering Design. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 1719- 1730 mehr…
  • Kortler, S.; Kohn, A.; Lindemann, U.: Validation of Product Properties Considering a High Variety of Complex Products. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 1731- 1740 mehr…
  • Königseder, C.; Shea, K.; Campbell, M.; I.: Comparing a Graph-Grammar Approach to Genetic Algorithms for Computational Synthesis of PV Arrays. CIRP Design Conference, Springer Verlag, 201228.-30.03.2012 mehr…
  • Langer, S.; Maier, A. M.; Wilberg, J.; Münch, T. J.; Lindemann, U.: Exploring Differences between Average and Critical Engineering Changes: Survey Results from Denmark. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 223- 232 mehr…
  • Lanza, G.; Lindemann, U.; Hellenbrand, D.; Mörtl, M.; Peters, S.: Produktbezogene Kosten über den Produktlebenszyklus. In: Gausemeier, J.; Lanza, G.; Lindemann, U. (Hrsg.): Produkte und Produktionssysteme integrativ konzipieren – Modellbildung und Analyse in der frühen Phase der Produktentstehung. Carl Hanser, 2012, 40-47 mehr…
  • Lehar, Matthew; Zimmermann, Markus: An inexpensive estimate of failure probability for high-dimensional systems with uncertainty. Structural Safety 36-37, 2012, 32-38 mehr…
  • Lindemann, U.; Meiwald, T.; Petermann, M.; Schenkl, S.: Know-how-Schutz im Wettbewerb. Gegen Produktpiraterie und unerwünschten Wissenstransfer. Springer, 2012 mehr…
  • Lindemann, Udo; Orawski, Robert: Hybridantriebe im PKW – eine Problemlösung jetzt oder in Zukunft? VPC - Virtual Powertrain Creation 2012 14. MTZ-Fachtagung, Springer, 201225.-26.09.2012 mehr…
  • Metzler, Torsten; Gerlinghaus, Fabian; Pierce, Brennand; Jowers, Iestyn; Shea, K.; Cheng, Gordon: Design and Emotional Expressiveness of Gertie (An Open Hardware Robotic Desk Lamp). The 21st IEEE International Symposium on Robot and Human Interactive Communication., IEEE, 201209.-13.09.2012, 1-6 mehr…
  • Mörtl, M.: Kostenrechnung in der Konstruktion. In: Steinhilper, R.; Rieg, F. (Hrsg.): Handbuch Konstruktion. Carl Hanser, 2012, 707-724 mehr…
  • Orawski, Robert; Hepperle, Clemens; Schenkl, Sebastian; Mörtl, Markus; Lindemann, Udo: Life-cycle oriented requirement formalization and traceability. Product Lifecycle Management : Towards Knowledge-Rich Enterprises, Verlagsname, 2012 mehr…
  • Orawski, Robert; Kammerl, Daniel; Schenkl, Sebastian; Hepperle, Clemens; Mörtl, Markus: Element Visualization ElViz: Graphical Representation of Planning-Relevant Dependencies between PSS-Elements. 4th CIRP International Conference on Industrial Product Service Systems, Springer Verlag, 201208.-09.11.2012, 73 - 78 mehr…
  • Parvan, M. I.; Miedl, F.; Lindemann, U.: Nature-inspired Process Model for Concept Selection and Evaluation in Engineering Design. NordDesign Conference 2012, 2012, 486 - 493 mehr…
  • Parvan, M.; Oepke, H.; Kaiser, K.; Lindemann, U.: Role Development for Interdisciplinary Collaboration Support in Biomimetics. International Conference on Industrial Engineering and Engineering Management, 201210.-13.12.2012, 832 - 836 mehr…
  • Perterer,M.; Friemel,M.; Baier,H.: Characterization of the influence of Comparative Vacuum Measurement (CVM) sensors in the context of Structural Health monitoring (SHM) systems. 6th European Workshop on Structural Health Monitoring (EWSHM) 2012, Dresden, 2012 mehr…
  • Petersson,Ö.; Baier,H.: Design Optimisation and Sensitivity Analysis Methods for Structural Components in Unsteady Air Flow. Int. Conf. on Rotor Machines Dynamics 2012, Honolulu, 2012 mehr…
  • Plaikner, S.; Kissel, M.; Kreimeyer, M.; Lindemann, U.: An Architecture Framework for Multi-Product Portfolio Management in the Commercial Vehicle Industry. NordDesign 2012, 201222.-24.08.2012 mehr…
  • Pleissner,M.; Trapani,M.; Isikveren,A.; Hornung,M.; Ajaj,R.; Friswell,M.; Wittmann,J.; Baier,H.: "Hierarchical approach for conceptual design of morphing devices. AIAA Conference on Structures, Dynamics and Materials 2012, Honolulu, USA, 2012 mehr…
  • Reik, Alexander U.; Weiß, Stefan; Lindemann, Udo: Lean Monitoring Card: An approach for the multi-perspective evaluation of the success of measures to reduce waste within the frame of Lean Development. CiDAD Working paper Series 8 (4), 2012, 1-12 mehr…
  • Reinicke,G.; Baier,H.; Grillenbeck,A.; Scharfeld,F.; Hunger,J.; Abou-El-Ela,A.; Löhberg,A.: "Active Vibration Damping of Solar Arrays". European Conference on Spacecraft Structures, Materials & Environmental Testing 2012, Noordwijk, 2012 mehr…
  • Rodrigues, G.; Such-Taboada, M.; Datashvili, L.; Tisgnadze, N.; Medzmariashvili, E.; Santiago-Prowald, J.: Isostatic Cable Net for Large Deployable Antenna Reflector. Proceedings of the ESA/ESTEC Antenna Workshop, 2012 mehr…
  • Schenkl, S. A.; Schneider, D.; Mörtl, M.; Lindemann, U.: PSS For Preventing Product Imitation. The Philosopher's Stone for Sustainability. Proceedings of the 4th CIRP International Conference on Industrial Product-Service Systems,, Springer, 2012, 483-488 mehr…
  • Schenkl, S. A.; Behncke, F. G. H.; Lindemann, U.: Assessing Procedures to Set up Protection Concepts against Product Counterfeiting. 2012 18th International Conference on Engineering, Technology and Innovation (ICE), 201218.-20.06.2012, 327-335 mehr…
  • Schenkl, S. A.; Schneider, D.; Mörtl, M.; Lindemann, U.: PSS For Preventing Product Imitation. In: Shimomura, Yoshiki; Kimita, Koji (Hrsg.): The Philosopher's Stone for Sustainability. Proceedings of the 4th CIRP International Conference on Industrial Product-Service Systems, Tokyo, Japan, November 8th - 9th, 2012. Springer, 2012, 483-488 mehr…
  • Schrieverhoff, P.; Bender, T.; Kissel, M.; Lindemann, U.: Evaluation of Architecture Options on System Engineering. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 1791- 1802 mehr…
  • Schrieverhoff, Phillip; Lindemann, Udo: Teaching TRIZ at TU Munich. TRIZ Future 2012, 201224.-26.10.2012, Seitenzahlen von - bis mehr…
  • Schrieverhoff, Phillip; Lindemann, Udo: Design for adaptability – support of upgrade strategies to react to evolving stakeholder needs and requirements. 14th International DSM Conference, Hanser, 201213.-14.09.2012 mehr…
  • Scialino, L.; Migliorelli, M.; Gatti, N.; Breunig, E.; Ihle, A.; Datashvili, L.; van´t Klooster, K.; Santiago Prowald, J.: Reflector Technology Trade-Off for LDA on Telecom and Earth Observation Applications. Proceedings of The ESA/ESTEC Antenna Workshop, 2012 mehr…
  • Sharafi, A.; Elezi, F.; Zuber, F.; Wolf, P.; Krcmar, H.; Lindemann, U.: Determining the Drivers for Long Lead Times of Engineering Change Orders: A Data Mining Approach. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 299-310 mehr…
  • Shea, Kristina: Systematische konzeptbasierte Modellentwicklung. Virtual Vehicle Magazine Nr. 12, II-2012 (Nummer), 2012, 14-15 mehr…
  • Siyam, G.I.; Kirner, K.; Wynn, D.C.; Lindemann, U.; Clarkson, P.J.: Relating Value Methods to Waste Types in Lean Product Development. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 93 -102 mehr…
  • Siyam, G.I.; Kirner, K.G.M.; Wynn, D.C.; Lindemann, U.; Clarkson, P.J.: Value and Waste Dependencies and Guidelines. 14th International DSM Conference, Hanser, 201213.-14.09.2012 mehr…
  • Späth, Rainer; Hesse, Miriam; Kohn, Andreas: Möglichkeiten der Informationsvisualisierung in der Montageabsicherung. DfX-Symposiums 2012, 201204.-05.10.2012 mehr…
  • Srinivasan, V.; Chakrabarti, A.; Lindemann, U.: A Framework for Describing Functions in Design. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 1111- 1122 mehr…
  • Stroscher, F.; Baier, H.: Combining active and passive load alleviation techniques in transport aircraft structural design. Royal Aircraft Society: Aircraft Structural Design Conference, 2012 mehr…
  • Ungwattanapanit, T.; Baier, H.: Strength-Stability Optimization of Hybrid-Stiffness Laminated Plates with Cutouts subjected to Multiple Loads. RAeS Aircraft Structural Design Conference 2012, 2012 mehr…
  • Wedekind, M.; Khoun, L.; Krempl, P.; Baier, H.; Hubert, P.: Impact behavior of thin thermoplastic composites dependant on manufacturing parameters and layup. SAMPE, 2012 mehr…
  • Wehrle, E.; Sauerer, B.; Wehrle, R.; Baier, H.: Ganzheitliche Strukturoptimierung von Fahrzeugkarosserien der Elektromobilität. Fakultätsseminar Mobilität, 2012 mehr…
  • Wei,B.; Datashvili,L.: "Cable web design for precision large deployable reflectors". Proceedings of the Workshop on Large Deployable Antennas 2012, Noordwijk, Holland, 2012 mehr…
  • Xu,Q.; Baier,H.: "Physical-mathematical Structure Concerned Metamodel for Multidisciplinary Design Optimization". Third International Workshop on Surrogate Modelling and Space Mapping For Engineering Optimization 2012, Reykjavik University, Iceland, 2012 mehr…
  • Xu,Q.; Wehrle,E.; Baier,H.: Adaptive surrogate-based design optimization with expected improvement used as infill criterion. Optimization, ISSN 0233-1934 print / ISSN 1029-4945 online, 2012 Taylor & Francis, (link) 2012, , 2012 mehr…
  • Zauner,C.; Gohlke,M.; Friemel,M.; Schmitt,S.; Steglich,D.; Weise,D.: CTE-Measurement of the Bepi Colombo HTHGA C/SIC Tubes using a specialized Laser Dilatometer. 12th European Conference on Spacecraft Structures Materials & Environmental Testing 2012, Noordwijk, 2012 mehr…
  • Zimmermann, Markus: Vehicle Front Crash Design Accounting for Uncertainties. In: Lecture Notes in Electrical Engineering. Springer Berlin Heidelberg, 2012 mehr…
  • da Rocha-Schmidt, L.; Hermanutz, A.; Hofheinz, N.; Baier, H.: Formvariable Steuerflächen und deren aeroelastisches Verhalten am Beispiel des Sagitta Demonstrators. Deutscher Luft- und Raumfahrtkongress, 2012 mehr…
  • von Saucken, C.; Schröer, B.; Kain, A.; Lindemann, U.: Customer Experience Interaction Model. International Design Conference DESIGN 2012, 201221.- 24.05.2012, 1387-1396 mehr…

2011

  • Eppinger, Steven D.; Maurer, Maik; Eben, Katharina; Lindemann, Udo (Hrsg.): Invest on Vizualization - Proceedings of the 13th International DSM Conference Cambridge. Hanser, 2011 mehr…
  • Anton, Thomas: Entwicklungs- und Einführungsmethodik für das Projektierungswerkzeug Pneumatiksimulation. Dissertation, 2011 mehr…
  • Antonelli,V.; He,P.; Baier,H.: Challenges in the design of high energy storage flywheels made of composite material. ICCM 18 2011, Korea, 2011 mehr…
  • Antonelli,V.; Wedekind,M.; Krämer,L.; Baier,H.: The Design of a CFRP Chopper Disk for a Time Of Flight Spectrometer. ICCM 18 2011, Korea, 2011 mehr…
  • Baier,H.; Datashvili,L.; Rapp,S.: Smart and Nano Materials for performance enhancement of Space Structures. Int. Conf. on Smart and Nano Materials 2011, Hongkong, 2011 mehr…
  • Baier,H.; Wehrle,R.: Modellierung von Fertigungsaufwänden in der Strukturoptimierung auf Basis qualitativer Informationen – Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen. VDI-Fortschritt-Berichte, 2011, mehr…
  • Bauer, Wolfgang; Daniilidis, Charalampos; Lindemann, Udo: Approach for a modularization driven system definition using multiple domains. 13th International DSM Conference, Hanser, 201114.-15.09.2011, 77-82 mehr…
  • Bauer, Wolfgang; Maurer, Maik: Future-proof interfaces: systematic identification and analysis. 13th International DSM Conference, Hanser, 201114.-15.09.2011, 89-94 mehr…
  • Behncke, Florian G. H.; Lindemann, Udo: Indicating the criticality of changes during the product life cycle. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Behncke, Florian; Abele, Katrin; Lindemann, U.: Impact of product design decisions within product development on the supplier selection process at the automotive industry. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 201106.-09.12.2011 mehr…
  • Behncke, Florian; Gabriel, Frank; Langer, Stefan; Hepperle, Clemens; Lindemann, U.; Karl, Florian; Pohl, Johannes; Schindler, Sebastian; Gunther, Reinhart; Zaeh, Michael: Analysis of information flows at interfaces between strategic product planning, product development and production planning to support process management - A literature based approach. 2011 IEEE International Conference on Systems, Man and Cybernetics - SMC, 201109.-12.10.2011 mehr…
  • Behncke, Florian; King, Moritz; Lindemann, U.: Educational game concept for the transfer of results from the transdisciplinary research to the new scientific generation. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 201106.-09.12.2011 mehr…
  • Biedermann, Wieland; Diepold, Klaus; Lindemann, Udo: Entscheidungsstrategien zur Festlegung und Priorisierung von Änderungen. Tag des Systems Engineering, Hanser, 201109.-11.11.2011, 141-150 mehr…
  • Biedermann, Wieland; Lindemann, Udo: Prediction of Communication Structures Based on Product Structures. 13th International DSM Conference, Hanser, 201114.-15.09.2011, 291-300 mehr…
  • Biedermann, Wieland; Lindemann, Udo: On the Applicability of Structural Criteria in Complexity Management. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011, 21-32 mehr…
  • Biedermann, Wieland; Lindemann, Udo: Designing Consistent Structural Analysis Scenarios. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011, 133-144 mehr…
  • Both,J.; Barfuß,D.; Baier,H.: Mode II delamination of CFRP-metal laminates at bolted joints. ICCM 18 2011, Jeju, South Korea, 2011 mehr…
  • Both,J.; Morasch,A.; Baier,H.: Load bearing capacity of hybrid CFRP-metal laminates. SEICO 11 2011, Paris, 2011 mehr…
  • Both,J.; Morasch,A.; Wehrle,E.; Baier,H. et al.: Advanced manufacturing and design techniques for lightweight structures. International Aluminium Journal, Vol. 87, S. 60-64 2011, 2011 mehr…
  • Both,J.; Wehrle,E.; Baier,H.: Werkstoffhybrider Leichtbau - Chancen und Risiken auf dem Weg zur Elektromobilität. Werkstoffforum intelligenter Leichtbau, Hannovermesse 2011, Hannover, 2011 mehr…
  • Daniilidis, Charalampos; Enßlin, Vincent; Eben, Katharina; Lindemann, Udo: A classification framework for product modularization methods. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Daniilidis, Harrys; Hellenbrand, David; Bauer, Wolfgang; Lindemann, Udo: Using Structural Complexity Management for Design Process Driven Modularization. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 201106.-09.12.2011 mehr…
  • Datashvili,L.; Baier,H.: A Nonlinear Numerical Method of Shape Finding of Tensioned Membranes. International Conference on Textile Composites and Inflatable Structures, Structural Membranes 2011, CIMNE 2011, Barcelona, 2011 mehr…
  • Datashvili,L.; Baier,H.: Flexible Fiber Composites for Space Structures. In: Fibre Composite Structures. Nova Science Publishers, Inc., 2011, USA, 2011 mehr…
  • Datashvili,L.; Baier,H.; Kuhn,T.; Langer,H.; Apenberg,S.; Wei,B.: A Large Deployable Space Array Antenna: Technology and Functionality Demonstrator. Proc. of ESA Antenna Workshop 2011, Noordwijk, 2011 mehr…
  • Datashvili,L.; Baier,H.; da Rocha-Schmidt,L.: Multi-scale Analysis of Structures made of Triaxially Woven Fabric Composites with Stiff and Flexible Matrix Materials. 52th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 2011, Denver, 2011 mehr…
  • Datashvili,L.; Baier,H.; da Rocha-Schmidt,L.; Wei,B.; Endler,S.; Langer,H.: "Large Aperture Antenna Architectures for Space Missions". Proc. of ESA Antenna Workshop 2011, Noordwijk, 2011 mehr…
  • Däkena, Heino; Hesse, Hans-Josef; Lehmann, Jörn; Knechtel, Martin; Kohn, Andreas: PROCESSUS. In: Heuser, Lutz; Wahlster, Wolfgang (Hrsg.): Internet der Dienste. Springer, 2011, 127-139 mehr…
  • Eben, Katharina; Helten, Katharina; Lindemann, Udo: Product development processes in small and middle-sized enterprises - identification and elimination of inefficiency caused by product variety. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Eberl, Thomas ; Stroph, Ralf ; Pruckner, Alfred: Analyse unterschiedlicher Bedienkonzepte der Fahrzeuglängsführung bei Elektromobilität. 2. Automobiltechnisches Kolloqium München, Verlagsname, 201111.-12.04.2011 mehr…
  • Eberl, Thomas; Jung, Martin; Stroph, Ralf; Pruckner, Alfred: Bedienkonzepte für die Fahrzeuglängsführung bei Elektromobilität. Der Fahrer im 21. Jahrhundert, 201108.-09.11.2011 mehr…
  • Elezi, Fatos; Graebsch, Martin; Hellenbrand, D.; Lindemann, U.: Application of Multi-Domain Matrix Waste Reduction Methodology. International Conference on Research into Design, Research Publishing, 201110-12.01.2011, 514 - 522 mehr…
  • Elezi, Fatos; Pechuan, Alvaro; Langer, S.; Herberg, Arne; Behncke, Florian G. H.; Lindemann, U.: Iteration Management by Identification of Value Stream in Product Development Processes. 13th International DSM Conference, Hanser, 201114.-15.09.2011, 247 - 258 mehr…
  • Elezi, Fatos; Pechuan, Alvaro; Mirson, Alexander; Kortler, Sebastian; Biedermann, Wieland; Lindemann, Udo: Supporting Cycle Management by Structural Analysis of the Organisational Domain in Multi-Project Environment. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Elezi, Fatos; Sharafi, Armin; Mirson, Alexander; Petra, Wolf; Krcmar, Helmut; Lindemann, U.: A Knowledge Discovery in Databases (KDD) Approach for Extracting Causes of Iterations in Engineering Change Orders. ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, ASME, 201128.-31.08.2011 mehr…
  • Filous, Michael N.: Lizenzierungsgerechte Produktentwicklung – Ein Leitfaden zur Integration lizenzierungsrelevanter Aktivitäten in Produktentstehungsprozesse des Maschinen- und Anlagenbaus. Dissertation, 2011 mehr…
  • Friemel,M.; Baier,H.: Verbundvorhaben: Höchstinnovative Satkom-Strukturen mit erhöhten thermischen und elektromagnetischen Eigenschaften (HISST), Schlussbericht zum BMWF Förderkennzeichen 50 YB 0929. BMWF, 2011, mehr…
  • Friemel,M.; Baier,H.; Datashvili,L.: New Experimental Techniques for Mechanical and Thermo-Elastic Characterization of Antenna Reflector Materials and Structures. 33rd ESA Antenna Workshop 2011, Noordwijk, 2011 mehr…
  • Fähling, Jens; Langer, Stefan; Schölkopf, Jan Michael; Leimeister, Jan Marco; Krcmar, Helmut; Lindemann, Udo: Enhancing the selection of methods for customer integration in innovation processes through a process-oriented description framework. International Conference on Research into Design, Research Publishing, 201110.-12.01.2011, 329 - 337 mehr…
  • Gmeiner, T.; Shea, K.: Development of an ontology for the automatic reconfiguration of a vise-type fixture device. IDETC/CIE 2011, ASME, 201128.-31.08.2011 mehr…
  • Gorbea Diaz, Carlos Enrique: Vehicle Architecture and Lifecycle Cost Analysis – In a New Age of Architectural Competition. Dissertation, 2011 mehr…
  • H. Baier, L. Datashvili: Active and Morphing Aerospace Structures - A Synthesis between Advanced Materials, Structures and Mechanisms. International Journal for Aeronautical and Space Science, 12(3), P. 225-240 2011, , 2011 mehr…
  • Hellenbrand, D.; Kissel, M.; Rohloff, J.; Lindemann, U.: Modellierung und Prognose von Entwicklungs- und Recyclingkosten in frühen Entwicklungsphasen. 22. DfX-Symposium 2011, 2011, 183-194 mehr…
  • Hellenbrand, David; Lindemann, Udo: A Framework for integrated Process Modeling and Planning of mechatronic Products. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Helms, Bergen; Schultheiss, Hansjoerg; Shea, K.: Automated Assignement of Physical Effects to Functions Using Ports Based on Bond Graph. ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, ASME, 201128.-31.08.2011 mehr…
  • Helten, Katharina; Eben, Katharina; Lindemann, Udo: Identification and Design of Pilot Projects to Implement Lean Development. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Helten, Katharina; Schenkl, Sebastian; Lindemann, Udo: Biologizing Product Development - Results from a Student Project. International Conference on Research into Design, Research Publishing, 201110.-12.01.2011, 27-34 mehr…
  • Helten, Katharina; Spillmann, Miriam; Brandstetter, Duygu; Lindemann, Udo: Teaching Students in Project Management - A Survey from a Project Semester. 13th International Conference on Engineering and Product Design Education - E&PDE2011, The Design Society Institution of Engineering Designers, 2011 mehr…
  • Hepperle, Clemens; Biedermann, Wieland; Böcker, Alexander; Lindemann, Udo: Design for X-guidelines and lifecycle phases with relevance for product planning – an MDM-based approach. 13th International DSM Conference, Hanser, 201114.-15.09.2011, 215-228 mehr…
  • Hepperle, Clemens; Förg, Armin; Mörtl, Markus; Lindemann, Udo: Consideration of goal interrelations in lifecycle-oriented product planning. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Hepperle, Clemens; Orawski, Robert; Langer, Stefan; Mörtl, Markus; Lindemann, Udo: Temporal aspects in lifecycle-oriented planning of product-service-systems. International Conference on Research into Design, Research Publishing, 201110.-12.01.2011, 338 - 346 mehr…
  • Hoisl, Frank; Shea, Kristina: An interactive, visual approach to developing and applying parametric three-dimensional spatial grammars. Artificial Intelligence for Engineering Design, Analysis and Manufacturing (25), 2011, 333-356 mehr…
  • Höchtl,F.; Perterer,M.; Kiefmann,A.; Senner,V.; Baier,H.: Influence of curvature on impact damage of strongly curved CFRP-structures. SAMPE TECH 2011 2011, Fort Worth, TX, 2011 mehr…
  • Jorgensen, Rune; Behncke, Florian G. H.: Considering sustainable impacts of suppliers throughout the product life cycle in the pursue of a sustainable vision. International Conference for Product Lifecycle Management, Inderscience Enterprises Ltd., 201111.-13.07.2011, 1-10 mehr…
  • Jowers, I.; Earl, C.: Implementation of curved shape grammars. Environment and Planning B: Planning and Design 38 (4), 2011, 616-635 mehr…
  • Jowers, I.; Prats, M.; McKay, A.; Garner, S.: Design exploration with useless rules and eye tracking. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011, 443-455 mehr…
  • Jowers, I.; Prats, M.; Pedreira, N.; McKay, A.; Garner, S.: Supporting Shape Reinterpretation with Eye Tracking. Circuit Bending, Breaking and Mending: Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia, CAADRIA, 201127.-30.04.2011, 101-110 mehr…
  • Kain, A.; Kirschner, R.; Lang, A.; Lindemann, U.: Facing the open innovation dilemma - structuring input at the company's border. 18th International Conference on Engineering Design, 201115.-18.08.2011 mehr…
  • Kain, A.; Kirschner, R.; Lindemann, U.: Open Innovation and User Experience: a chance to gain deeper user insights. 13th Conference on Human-Computer Interaction (INTERACT), Workshop User Experience in Cars, 201105.-09.09.11 mehr…
  • Kirn,J.; Lorkowski,T.; Baier,H.: Development of Flexible Matrix Composites (FMC) for Fluidic Actuators in Morphing Systems. Int. Journal of Structural Integrity, Vol. 2 No. 4, 2011 2011, , 2011 mehr…
  • Kirschner, R.; Kain, A.; Lang, A.; Lindemann, U.: Immersive product improvement IPI - first empirical results of a new method. 18th International Conference on Engineering Design, 201115.-18.08.2011 mehr…
  • Kissel, M.; Hellenbrand, D.; Lindemann, U.; Schullerus, W.: Robustheitsbewertung von Produktkonzepten in frühen Entwicklungsphasen. Wissenschaftsforum Intelligente Technische Systeme 2011, 201119. - 20.05.2011 mehr…
  • Kissel, Maximilian; Hellenbrand, David; Lindemann, Udo: A Methodology to evaluate the structual Robustness of Produtct Concepts. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Kissel, Maximilian; Hellenbrand, David; Schullerus, Wolfgang; Lindemann, Udo: Robustheitsbewertung von Produktkonzepten in frühen Entwicklungsphasen. 8. Paderborner Workshop Entwurf mechatronsicher Systeme, 201119.-20.05.2011, 133-145 mehr…
  • Knoblinger, Christoph; Oehmen, Josef; Rebentisch, Eric; Seering, Warren; Helten, Katharina: Requirements for Product Development Self-Assessment Tools. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Kohn, Andreas; Lindemann, Udo: Search for similar technical solutions by object abstraction using an ontology. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Kohn, Andreas; Maurer, Maik; Schmidt, Helena X.; Lindemann, Udo: Use of existing ontologies as input for Structural Complexity Management - Reducing the effort for analysing and improving engineering systems. KEOD 2011 - International Conference on Knowledge Engineering and Ontology Development, 201125. - 30.10.2011 mehr…
  • Kohn, Andreas; Schmidt, Helena X.; Lindemann, Udo: Erfolgreicher Umgang mit Wissensmodellen in Unternehmen - Handhabung semantischer Modelle zur Erschließung und Nutzung von Wissen über technische Lösungen. KnowTech 2011: Unternehmenswissen als Erfolgsfaktor mobilisieren, 201128. - 29.09.2011 mehr…
  • Kortler, Sebastian; Helms, Bergen; Shea, Kristina; Lindemann, Udo: A More Flexible Way of Modelling Structure With Multiple Domains. 13th International DSM Conference, Hanser, 201114.-15.09.2011 mehr…
  • Kortler, Sebastian; Lindemann, Udo: A Meta Model of the Innovation Process to Support the Decision Making Process Using Structural Complexity Management. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Koukal,A.; Baier,H.; Clausen,A.H.; Seibert,D.: Influence of the fibre content on the mechanical behaviour of polymers for pedestrian protection. 3rd International Conference on Impact Loading of Lightweight Structures (ICILLS) 2011, Valenciennes, 2011 mehr…
  • Krinner, Michael; Elezi, Fatos; Tommelein, Iris; Lindemann, U.: Managing Complexity in Lean Construction Design – Using the MDM Methodology to create organizational Modularity. 13th International DSM Conference, Hanser, 201114.-15.09.2011, 377 - 390 mehr…
  • Kuhn, Thomas: Charakterisierung und multidisziplinäre Entwurfsoptimierung von Membranstrukturen bei Luft- und Raumfahrtanwendungen. Dissertation, 2011 mehr…
  • Kuhn,T.; Langer,H.; Apenberg,S.; Wei,B.; Datashvili,L.: A Very Large Deployable Space Antenna Structure Based on Pantograph Tensioned Membranes. International Conference on Textile Composites and Inflatable Structures, Structural Membranes, CIMNE 2011, Barcelona, 2011 mehr…
  • Lang, A.; Kirschner, R.; Kain, A.; Lindemann, U.: Overcomming the keep the market out premise (KMOP) in product development. 18th International Conference on Engineering Design, 201115.-18.08.2011 mehr…
  • Lang, Alexander; Kirschner, Rafael; Kain, Andreas; Lindemann, Udo: OVERCOMING THE KEEP THE MARKET OUT PREMISE (KMOP) IN PRODUCT DEVELOPMENT. INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, ICED11, 2011 mehr…
  • Langer, Stefan; Herberg, Arne; Körber, Klaus; Lindemann, Udo: Integrated system and context modeling of iterations and changes in development processes. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Li, Fang; Vierheilig, Johannes; Helms, Bergen; Bayrak, Gülden; Vogel-Heuser, Birgit; Shea, Kristina: Towards Management of Information Technology-Cycles in transdisciplinary Innovation Processes. 37th Annual Conference of the IEEE Industrial Electronics Society (IECON11), IEEE, 201107.-10.11.2011 mehr…
  • Lindemann, Udo; Biedermann, Wieland: Die Ingenieurpromotion am Lehrstuhl für Produktentwicklung der TU München. In: Hippler, Horst (Hrsg.): Ingenieurpromotion - Stärken und Qualitätssicherung. Springer, 2011, 187-196 mehr…
  • Maier, Anja; Dönmez, Denniz; Hepperle, Clemens; Kreimeyer, Matthias; Lindemann, Udo; Clarkson, John: Improving communication in design: recommendations from the literature. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Maier, Anja; Langer, Stefan: Engineering change management report 2011: Survey results on causes and effects, current practice, problems, and strategies in Denmark. Technical University of Denmark, Department of Management Engineering, 2011 mehr…
  • Maurer, Maik: Process optimization by DSM-based modelling of inputs and outputs. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Maurer, Maik: Systematic Knowledge Transfer based on Knowledge Correlations. International Conference on Research into Design, Research Publishing, 201110.-12.01.2011, 320-328 mehr…
  • Maurer, Maik; Kesper, Heiner: eFMEA – Raising Efficiency of FMEA by Matrix-Based Function and Failure Networks. International Conference on Research into Design, Research Publishing, 201110.-12.01.2011, 179-186 mehr…
  • McKay, A.; Jowers, I.; Chau, H. H.; de Pennington, A.; Hogg, D. C.: Computer-aided design synthesis: an application of shape grammars. International Journal of Product Development 13 (1), 2011, 4-15 mehr…
  • Meiwald, Thomas: Konzepte zum Schutz vor Produktpiraterie und unerwünschtem Know-how-Abfluss. Dissertation, 2011 mehr…
  • Metzler, Torsten; Shea, Kristina: Lessons Learned from a Project-Based Learning Approach for Teaching New Cognitive Product Development to Multi-Disciplinary Student Teams. IDETC/CIE 2011, ASME, 201129.-31.08.2011, 1-10 mehr…
  • Metzler, Torsten; Shea, Kristina: Taxonomy of Cognitive Functions. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011, 1-12 mehr…
  • Migliorelli,M.; Scialino,L.; Breunig,E.; Ihle,A.; Datashvili,L.; van´t Klooster,K.; Santiago Prowald,J.: Reflector Technology Trade-Off for LDA on Telecom and Earth Observation Applications. Proc. of ESA Antenna Workshop 2011, Noordwijk, 2011 mehr…
  • Mirson, Alexander; Skrypnyuk, Oleg; Elezi, Fatos; Lindemann, U.: MDM-Based Software Modularization by Analysing Inter-Project Dependencies. 13th International DSM Conference, Hanser, 201114.-15.09.2011, 143 - 157 mehr…
  • Moerk, Sindre; Elezi, Fatos; Lindemann, U.: Structural Analysis Crossing Domain Borders. 13th International DSM Conference, Hanser, 201114.-15.09.2011, 37 - 44 mehr…
  • Mohr,B.; Paulus,D.; Baier,H.; Hornung,M.: Design of a 450 Passenger Blended Wing Body Aircraft for Active Control Investigations. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 2011, 2011 mehr…
  • Morasch,A.; Prievitzer,J.; Baier,H.: Zur ganzheitlichen Bewertung von Werkstoffen am Beispiel von naturfaserverstärkten und glasfaserverstärkten Kunststoffen. 60. Deutscher Luft- und Raumfahrtkongress 2011, Bremen, 2011 mehr…
  • Musiol, Jan; Zaeh, Michael F.; Guertler, Matthias: Contribution on Modeling the Remote Ablation Cutting. ICALEO 2011, Laser Institute of America (LIA pub), 201123.-27.10.2011, 536-546 mehr…
  • Mörtl, Markus; Schmied, Christian: Literaturstudie für die FVA offenbart weiteren Forschungsbedarf im Bereich Kostenschätzen. CiDaD News 8 (2), 2011, 4-5 mehr…
  • Müller, Uwe Christian: Structural Monitoring and Displacement Field Estimation based on Distributed Fiber Bragg Grating Sensors. Dissertation, 2011 mehr…
  • Orawski, Robert; Hepperle, Clemens; Mörtl, Markus; Lindemann, Udo: Reoccurring Cyclic Consideration of End-of-Life Requirements During Product Planning. International Conference on Research into Design, Research Publishing, 201110.-12.01.2011, 533 - 540 mehr…
  • Orawski, Robert; Krollmann, Jan; Mörtl, Markus; Lindemann, Udo: Generic Model of the Early Phase of an Innovation Process regarding Different Degrees of Product Novelty. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011 mehr…
  • Parvan, M. I.; Schwalmberger, A.; Lindemann, U.: Application of Basic Design Principles for Solution Search in Biomimetics. 18th International Conference on Engineering Design, 201115.-18.08.2011 mehr…
  • Paulus,D.; Salmon,T.; Mohr,B.; Rößler,C.; Petersson,Ö.; Stroscher,F.; Baier,H.; Hornung,M.: Configuration selection for a 450 passenger ultra-efficient 2020 aircraft. 4th European Conference for Aerospace Sciences (EUCASS) 2011, St. Petersburg, 2011 mehr…
  • Perterer,M.; Baier,H.; Höchtl,F.: Cost-Effective, Phase-Based Thermography Method for Ultrasonic Investigation of defects in CFRP Structures. SAMPE Journal, Vol. 47, Nr. 6 , p 46-52. 2011, , 2011 mehr…
  • Perterer,M.; Baier,H.; Höchtl,F.: Comparison of a Cost-Effective Phase Based Thermography Method with Ultrasonic Investigation of Defects in CFRP Structures. SAMPE TECH 2011 2011, Fort Worth, TX, 2011 mehr…
  • Perterer,M.; Höchtl,F.; Kiefmann,A.; Baier,H.; Senner,V.: Cost-Effective Phase-Modulated Thermography for Damage Inspection of Flat and Strongly Curved CFRP Structures. 2nd Innovative International Composites Summit (I.I.C.S) 2011, Paris, 2011 mehr…
  • Perterer,M.; Höchtl,F.; Kiefmann,A.; Baier,H.; Senner,V.: Kosteneffiziente phasenmodulierte Thermographie zur Schadensdetektion an flachen und stark gekrümmten Bauteilen aus CFK. DGZfP-Jahrestagung 2011, Berichtsband 127-CD 2011, Bremen, 2011 mehr…
  • Perterer,M.; Wedekind,M.; BaierH.: Imperfektionsbewertung von Faserverbund-Metallstrukturen mit zerstörungsfreien Prüfverfahren. Proceedings: Deutscher Luft- und Raumfahrtkongress, p. 655-661, 2011, Bremen, 2011 mehr…
  • Petermann, Markus Alexander: Schutz von Technologiewissen in der Investitionsgüterindustrie. Dissertation, 2011 mehr…
  • Petersson,Ö.; Baier,H.: Multidisciplinary optimization of aircraft structures subject to dynamic aeroelastic loads, including a linear load alleviation system. 15th International Forum on Aeroelasticity and Structural Dynamics (IFASD) 2011, Paris, 2011 mehr…
  • Ponn, Josef; Lindemann, Udo: Produktentwicklung und Konstruktion - Systematisch von Anforderungen zu Konzepten und Gestaltunglösungen. Springer (2. Aufl.), 2011 mehr…
  • Rapp,S.; Baier,H.: Shape Memory Polymer Actuator Patches for Shape Adjustment of Fiber Composite Parts. 19th AIAA/ASME/AHS Adaptive Structures Conference 2011, Denver, 2011 mehr…
  • Reinicke,G.; Baier,H.: Active Vibration Control of Large Satellite Solar Array Panels with Regional Mode Shapes. 14th International Adaptronic Congress 2011, Darmstadt, 2011 mehr…
  • Reinicke,G.; Baier,H.;: An alternative method to evaluate the effect of piezoelectric patch actuators bonded to flexible structures. 22nd International Conference on Adaptive Structures and Technologies 2011, Corfu, Greece, 2011 mehr…
  • Roelofsen, Julia: Situationsspezifische Planung von Produktentwicklungsprozessen. Dissertation, 2011 mehr…
  • Schenkl, Sebastian A.; Orawski, Robert; Elezi, Fatos; Lindemann, Udo: Towards a Lifecycle-oriented Planning of a Platform Portfolio. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 201106.-09.12.2011, 714 - 718 mehr…
  • Schenkl, Sebastian; Kaiser, Katharina; Lindemann, Udo: A Framework for Bottom-Up Biomimetics. 1st International Bionic Engineering Conference, 201118.-20.09.2011 mehr…
  • Schenkl, Sebastian; Ponn, Josef; Lindemann, Udo: Managing Uncertainties of Requirements in Product Platform Development. International Conference on Research into Design, Research Publishing, 201110.-12.01.2011, 195-202 mehr…
  • Schmidt, Helena X.; Kohn, Andreas; Lindemann, Udo: Domain Specific Language in Technical Solution Documents - Discussion of two Approaches to Improve the Semi-automated Annotation. KEOD 2011 - International Conference on Knowledge Engineering and Ontology Development, 201125. - 30.10.2011 mehr…
  • Schmitz, Steffen; Wynn, David C.; Biedermann, Wieland; Lindemann, Udo; Clarkson, P. John: Improving Data Quality in DSM Modelling: A Structural Comparison Approach. 18th International Conference on Engineering Design, Design Society, 201115.-18.08.2011, 319-328 mehr…
  • Schrieverhoff, Phillip; Jorgensen, Rune; Lindemann, Udo: TRIZ as Innovation Driver in Sustainable Product Design. TRIZ Future 2011, 201102.-04.11.2011 mehr…
  • Schrieverhoff, Phillip; Jorgensen, Rune; Lindemann, Udo: Resource and Cost Oriented Innovation Steering in Sustainable Product Design. Eco Design 2011, 201130.11.-02.12.2011 mehr…
  • Schröer, Bernd; Lindemann, Udo: Concretization of User-Representation: Modeling User Action as Part of a Product Solution. 4th World Conference on Design Research, IASDR 2011, International Association of Societies of Design Research, 201131.10.-04.11.2011 mehr…
  • Schröer, Bernd; Löhmann, Sebastian; Lindemann, Udo: Creating User Experience by novel Interaction Forms: (Re)combining Actions and Technologies. 13th Conference on Human-Computer Interaction (INTERACT), Workshop User Experience in Cars, 201105.-09.09.2011 mehr…
  • Schütz, D.; Schraufstetter, M.; Folmer, J.; Vogel-Heuser, B.; Gmeiner, T.; Shea, K.: Highly reconfigurable production systems controlled by real-time agents. 16th Conference on Emerging Technologies & Factory Automation (ETFA), 20115-9 Sept. 2011, 1-8 mehr…
  • Seibert,D.; Koukal,A.: Pedestrian protection and its implications on front-ends. International Conference Automotive Front-End 2011, Wiesbaden, 2011 mehr…
  • Sop Njindam, Thierry; Metzler, Torsten; Paetzold, Kristin; Shea, Kristina: Integrating Failure Analysis into the Conceptual Design of Cognitive Products: Towards a New Paradigm. Symposium Design for X 2011, 201111.-12.10.2011, 1-18 mehr…
  • Stroscher,F.; Sika,Z.; Petersson,Ö.: Reduced order model (ROM) of a blended wing body (BWB) aircraft configuration. 4th European Conference for Aerospace Sciences 2011, St. Petersburg, 2011 mehr…
  • Wedekind,M.; Both,J.; Baier,H.: Modellierung mechanischer Eigenschaften orthotroper Verbundprofile in früher Konstruktionsphase. VDI, Fortschrittsberichte VDI Reihe 2, Nr. 678, S. 387-415 2011, VDI-Verlag, Düsseldorf , 2011, mehr…
  • Wehrle,E.; Both,J.; Wehrle,R.; Baier,H.: Entwurfsoptimierung einer werkstoffhybriden Karosserie für Elektrofahrzeuge. Leichtbau-Colloquium 2011, Landshut, 2011 mehr…
  • Wehrle,E.; Huber,M.; Baier,H.: Entwurfsoptimierung leichter Tragwerksstrukturen unter Berücksichtigung von Fertigungsaufwand und -abweichungen. VDI, Fortschrittsberichte VDI Reihe 2, Nr. 678, S. 319-338 2011, , 2011, mehr…
  • Wehrle,E.; Wedekind,M.; Baier,H.;: Fuzzy modeling of imprecise material parameters in the analysis of metal matrix composite structures. ASME International Mechanical Engineering Congress & Exposition 2011, Denver, 2011 mehr…
  • Wildschek, A.; Hanis, T.; Stroscher, F.: L-infinity-Optimal Feed-forward Gust Load Alleviatkion Design for a large Blended Wing Body Airliner. EUCASS, 2011 mehr…
  • Wölkl, S.; Shea, K.: Modellbibliotheken für die Funktions- und Komponentenmodellierung in der Konzeptentwicklung mit SysML. 8. Paderborner Workshop Entwurf Mechatronischer Systeme, HNI-Verlagsschriftenreihe, 201119.-20-05.2011 mehr…
  • Z.-Q. Yu, S.-L. You, Z.-G. Yang, H. Baier: Effect of Surface Functional Modification of Nano-Alumina Particles on Thermal and Mechanical Properties of Epoxy Nanocomposites. Acvanced Composite Materials 20, p. 487-502 2011, 2011 mehr…
  • Zaeh, Michael F.; Reinhart, Gunther; Lindemann, Udo; Karl, Florian; Biedermann, Wieland: DSM-based Evaluation of Assembly Manufacturing Resources. 13th International DSM Conference, Hanser, 201114.-15.09.2011, 291-300 mehr…
  • Zhang,Y.; Baier,H.: Optimal Parts Allocation for Structural Systems Via Improved Initial Solution Generation. VII. ALIO / EURO Workshop on Applied Combinatorial Optimization 2011, Porto, Portugal, 2011 mehr…
  • von Saucken, Constantin; Schröer, Bernd; Lindemann, Udo: Industrial Designers and Engineers in Product Development. Conflicts and Approaches for Improving Collaboration. 4th World Conference on Design Research, IASDR 2011, International Association of Societies of Design Research, 201131.10.-04.11.2011 mehr…

2010

  • Wynn, David C.; Kreimeyer, Matthias; Eben, Katharina; Maurer, Maik; Lindemann, Udo; Clarkson, John (Hrsg.): Managing Complexity by Modelling Dependencies - Proceedings of the 12th International DSM Conference. Hanser, 2010 mehr…
  • Maurer, M.; Schulze, S.-O. (Hrsg.): Tag des Systems Engineering - Menschen, Kosten Komplexe Produkte, Dienstleistungen. Hanser, 2010 mehr…
  • Method and Device for Holding and Machining a Workpiece. 2010, (anderer Eintrag) mehr…
  • Verfahren und Vorrichtung zum Halten und Bearbeiten eines Werkstückes. 2010, (anderer Eintrag) mehr…
  • Antonelli, V.; Marissen, R.: FE-Modelling of the Rubber Mould Behaviour during Press Forming of Thermoplastic Composites. International Journal of Material Forming 01 (3), 2010, PP. 679-682 mehr…
  • Antonelli,V.; Marissen,R.: FE-Modelling of the rubber mould behaviour during press forming of thermoplastic composites. 13th ESAFORM 2010 conference on material forming 2010, Brescia, 2010 mehr…
  • Baier,H.; Datashvili,L.: Shape morphing and control of flexible surfaces for aerospace applications. Conf. European Aeronautic Science Network 2010, Paris, 2010 mehr…
  • Bannat, A.; Bautze, T.; Beetz, M.; Blume, J.; Diepold, K.; Ertelt, C.; Geiger, F.; Gmeiner, T.; Gyger, T.; Knoll, A.; Lau, C.; Lenz, C.; Ostgathe, M.; Reinhart, G.; Roesel, W.; Ruehr, T.; Schuboe, A.; Shea, K.; Stork genannt Wersborg, I.; Stork, S.; Tekouo, W.; Wallhoff, F.; Wiesbeck, M.; Zaeh, M. F.: Artificial Cognition in Production Systems. Automation Science and Engineering, IEEE Transactions on PP (99), 2010, 1-27 mehr…
  • Biedermann, Wieland; Diepold, Klaus J.; Lindemann, Udo: Modellabstufungen zur Betrachtung struktureller und dynamischer Komplexität. Tag des Systems Engineering, Hanser, 201010.-12.11.2010, 97-108 mehr…
  • Biedermann, Wieland; Strelkow, Ben; Karl, Florian; Lindemann, Udo; Zaeh, Michael F.: Reducing Data Acquisition Effort by Hierarchical System Modelling. 12th International DSM Conference, Hanser, 201022.-23.07.2010, 309-318 mehr…
  • Both,J.; Kremser,F.; Rüger,O.: Werkstoffe und Konzepte: Neue Techniken, neue Materialien - das Mute-Elektrofahrzeug der TU München. Insight Automobil Industrie 12 2010, , 2010 mehr…
  • Braun, Steven; Birkner, Klaus; Petermann, Markus: Kostenneutraler Schutz vor Produktnachahmung. CiDaD Working Paper Series 6 (1), 2010, 5-7 mehr…
  • Daniilidis, Charalampos; Eben, Katharina; Deubzer, Frank; Lindemann, Udo: Simultaneous modularization and platform identification of product family variants. 8th NordDesign Conference, Chalmers University of Technology, 201025.–27.08.2010 mehr…
  • Daniilidis, Charalampos; Lamperstorfer, Thomas; Kirschner, Rafael; Kain, Andreas; Lindemann, Udo: A Systematic Approach to Design a Knowledge Transfer Framework for Process Improvement Projects. IEEE IEEM 2010 - Industrial Engineering and Engineering Management, 201007.-10.12.2010, 183 - 187 mehr…
  • Datashvili,L.: "Multifunctional and Dimensionally Stable Flexible Fibre Composites for Space Applications". Acta Astronautica, Vol. 66, numbers 7-8 April-May , pp. 1081-1086 2010, , 2010 mehr…
  • Datashvili,L.; Baier,H.; Wehrle,E.; Kuhn,T.; Hoffmann,J.: Large Shell-Membrane Space Reflectors. 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 12 - 15 April 2010 2010, Orlando, Florida, USA, 2010 mehr…
  • Datashvili,L.; Baier,H.; Wei,B.; Hoffmann,J.; Wehrle,E.; Schreider,L.; Mangenot,C.; Santiago-Prowald,J.; Scolamiero,L.; Angevain,J.-C.: "Mechanical Investigations of in-space-Reconfigurable Reflecting Surfaces ",. ESA Antenna Workshop 2010, Noordwijk, 2010 mehr…
  • Diepold, Klaus J.; Biedermann, Wieland; Eben, Katharina G. M.; Kortler, Sebastian; Lohmann, Boris; Lindemann, Udo: Combining Structural Complexity Management and Hybrid Dynamical System Modelling. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010, 1045-1054 mehr…
  • Eben, Katharina; Daniilidis, Charalampos; Lindemann, Udo: Interrelating and prioritising requirements on multiple hierarchy levels. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010, 1055 - 1064 mehr…
  • Eben, Katharina; Daniilidis, Charalampos; Lindemann, Udo: How to set up student projects within collaborative research projects. 12th International Conference on Engineering and Product Design Education, The Design Society, 201002.-03.09.2010 mehr…
  • Eben, Katharina; Lindemann, Udo: Structural analysis of requirements - interpretation of structural criterions. 12th International DSM Conference, Hanser, 201022.-23.07.2010, 249-261 mehr…
  • Elezi, Fatos; Graebsch, Martin; Lindemann, Udo: Reducing waste in product development by use of Multi-Domain Matrix methodology. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Ernicke, Moritz; Schenkl, Sebastian; Petermann, Markus; Meiwald, Thomas: Patente: Kosten und Alternativen. CiDaD Working Paper Series 6 (1), 2010, 2-5 mehr…
  • Fillafer,A.; Petersson,Ö.; Baier,H.; Werner,E.: "Design optimization of Fibre-reinforced wing structures with aeroelastic and aerodynamic constraints. NASTRAN user´s Meeting 2010, München, 2010 mehr…
  • Forsen,I.; Granzow,S.; Baier,H.: Mechatronik und Leichtbau: gemeinsame Simulation mittels modaler Korrekturverfahren. Konstruktion, Heft 7-8, S. 51-56 2010, , 2010 mehr…
  • Furtmeier, Fabian; Graebsch, Martin; Elezi, Fatos; Tommelein, Iris; Lindemann, Udo: MDM as a Process Mapping Tool in Lean Construction. 12th International DSM Conference, Hanser, 201022.-23.07.2010 mehr…
  • Gaag, Andreas Franz: Entwicklung einer Ontologie zur funktionsorientierten Lösungssuche in der Produktentwicklung. Dissertation, 2010 mehr…
  • Gorbea, Carlos; Hellenbrand, David; Srivastava, T.; Biedermann, Wieland; Lindemann, Udo: Combatibility Matrix Methodology applied to the identification of vehicle architectures and design requirements. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Hellenbrand, David; Daniilidis, Charalampos; Lindemann, Udo: Integrierte funktionsorientierte Produkt- und Prozessmodellierung mechatronischer Produkte. 7. Paderborner Workshop - Entwurf mechatronischer Systeme, Heinz Nixdorf Institut, 201018.-19.03.2010, 39-52 mehr…
  • Hellenbrand, David; Helten, Katharina; Lindemann, Udo: Approach for development cost estimation in early design phases. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Helms, Bergen; Shea, Kristina: booggie - an object-oriented graph-grammar implementation for engineering design synthesis. Fourth International Conference on Design Computing and Cognition DCC'10, Springer, 201012.-14.07.2010 mehr…
  • Helms, Bergen; Shea, Kristina: Object-oriented concepts for computational design synthesis. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Helten, Katharina; Hellenbrand, David; Lindemann, Udo: A procedural model to assess main influences of production on product design. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Hepperle, Clemens; Bradford, Nikolas; Costantino, Francesco; Orawski, Robert; Langer, Stefan; Lindemann, Udo: Calculating lifecycle interdependencies based on Eco-Design strategies. IEEE IEEM 2010 - Industrial Engineering and Engineering Management, 201007.-10.12.2010, 743 - 747 mehr…
  • Hepperle, Clemens; Langer, Stefan; Scherer, Anne; Schwetz, Philipp; Lindemann, Udo: Consideration of factors influencing the time of launching new products. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010, 1099-1108 mehr…
  • Hepperle, Clemens; Orawski, Robert; Nolte, Benjamin Dominik; Mörtl, Markus; Lindemann, Udo: An integrated lifecycle model of product-service-systems. 2nd CIRP Industrial Product-Service Systems Conference, Linköping University 2010, 201013.-17.04.2010, 159-166 mehr…
  • Herberg, Arne; Langer, Stefan; Lindemann, Udo: Ontogeny and transformation of product models - analysis based on development project documentation. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Herberg, Arne; Langer, Stefan; Lindemann, Udo: Characterizing triggers of reactive cycles within design processes based on process observation. IEEE IEEM 2010 - Industrial Engineering and Engineering Management, 201007.-10.12.2010, 478 - 482 mehr…
  • Hoisl, Frank; Shea, Kristina: Interactive, Visual 3D Spatial Grammars. Fourth International Conference on Design Computing and Cognition DCC'10, Springer, 201012.-14.07.2010, 643-662 mehr…
  • Huber,M.; Neufeld,D.; Chung,J.; Behdinan,K.; Baier,H.: Data Mining Based Mutation Function for optimization problems with mixed continuous-discrete design variables. International Journal of Structural and Multidisciplinary Optimization: Volume 41, Issue 4 (2010), Page 589 (DOI 10.1007/s00158-009-0439-4), 2010, , 2010 mehr…
  • Höchtl,F.; Perterer,M.; Kiefmann,A.; Senner,V.; Baier,H.: Steinschläge und Co. – Impactproblematik von CFK-Strukturen im Fahrradbau. 1. Fahrradentwickler Conference: Leichtbau, Strukturen und Komponenten 2010, München, 2010 mehr…
  • Jowers, I.; Earl, C.: The construction of curved shapes. Environment and Planning B: Planning and Design 37 (1), 2010, 42-58 mehr…
  • Jowers, I.; Hogg, D. C.; McKay, A.; Chau, H. H.; de Pennington, A.: Shape Detection with Vision: Implementing Shape Grammars in Conceptual Design. Research in Engineering Design 21 (4), 2010, 235-247 mehr…
  • Jowers, I.; Prats, M.; Eissa, H.; Lee, J.: A Study of Emergence in the Generation of Islamic Geometric Patterns. New Frontiers: Proceedings of the 15th International Conference on Computer-Aided Architectural Design Research in Asia, CAADRIA, 20107.-10.04.2010, 39–48 mehr…
  • Kain, Andreas; Kirschner, Rafael; Gorbea, Carlos; Kain, Tatiana; Gunkel, Jennifer; Klendauer, Ruth; Lindemann, Udo: An approach to discover innovation potential by means of delta applications. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Kirschner, Rafael; Kain, Andreas; Fischer, Jan; Gunkel, Jennifer; Klendauer, Ruth; Lang, Alexander; Lindemann, Udo: An approach to support the selection of customer integration methods in new product development. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Kissel, Maximilian; Eben, Katharina; Braun, Steven; Schmidt-Colinet, Jakob; Obermeier, Martin; Lindemann, Udo; Vogel-Heuser, Birgit: A framework for evaluating product architecture of automation production facilities. 12th International DSM Conference, Hanser, 201022.-23.07.2010, 183 - 194 mehr…
  • Kohn, Andreas; Lindemann, Udo: Approach towards a more flexible handling of domains in complex systems. 12th International DSM Conference, Hanser, 201022.-23.07.2010, 249-261 mehr…
  • Kohn, Andreas; Peter, Gerhard; Lindemann, Udo: The Challenge of automatically annotating solution documents. KEOD 2010 - International Conference on Knowledge Engineering and Ontology Development, INSTICC Press, 201025.-28.10.2010 mehr…
  • Kortler, Sebastian; Diepold, Klaus Jürgen; Lindemann, Udo: Structural Complexity Management using domain-spanning structural criteria. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Kortler, Sebastian; Helms, Bergen; Berkovich, Marina; Lindemann, Udo; Shea, Kristina; Leimeister, Jan Marco; Krcmar, Helmut: Using MDM-Methods in order to improve managing of iterations in design processes. 12th International DSM Conference, Hanser, 201022.-23.07.2010, 125-138 mehr…
  • Kreimeyer, M.; Bradford, N.; Langer, S.; Biedermann, W.; Lindemann, U.: Systematic aggregation of dependency models - principles and forms of aggregating several domains. 8th International Symposium on Tools and Methods of Competitive Engineering, Delft University of Technology, 201012.-16.04.2010, 1121 - 1134 mehr…
  • Kreimeyer, Matthias F.: A Structural Measurement System for Engineering Design Processes. Dissertation, 2010 mehr…
  • Kuhn,T.; Baier,H.: "Multidisciplinary modeling approaches for membrane structures in aerospace applications". 13th AIAA/ISSMO Multidisciplinary Analysis Optimization (MAO) Conference, 13-15 September 2010, Fort Worth, Texas, USA, 2010 mehr…
  • Labuttis, Johannes; Meiwald, Thomas: Plagiatschutz durch Target Costing. CiDaD Working Paper Series 6 (1), 2010, 8 mehr…
  • Langer, Stefan; Herberg, Arne; Körber, Klaus; Lindemann, Udo: Development of an Explanatory Model of Cycles within Development Processes by Integrating Process and Context Perspective. IEEE IEEM 2010 - Industrial Engineering and Engineering Management, 201007.-10.12.2010, 1796 - 1800 mehr…
  • Langer, Stefan; Knoblinger, Christoph; Lindemann, Udo: Analysis of dynamic changes and iterations in the development process of an electrically powered go-kart. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Lauer, Wolfgang: Integrative Dokumenten- und Prozessbeschreibung in dynamischen Produktentwicklungsprozessen. Dissertation, 2010 mehr…
  • Lederer, Sebastian; Marle, Franck; Hepperle, Clemens; Lindemann, Udo: Analysis of decision-making processes in the development of complex solutions. 12th International DSM Conference, Hanser, 201022.-23.07.2010, 45-53 mehr…
  • Lindemann, U.; Bauer, W.; Petermann, M.; Schenkl, S.; Gausemeier, J.; Kokoschka, M.; Köster, O.: Präventiven Produktschutz betreiben. Konstruktion 59, 2010, 59 - 60 mehr…
  • Lindemann, Udo: Wie kann man Technik darstellen? Wie werden Technikdarstellungen verstanden? In: Kornwachs, Klaus (Hrsg.): Technologisches Wissen - Entstehung, Methoden, Strukturen. Springer, 2010, 81-104 mehr…
  • Maurer, M.; Kesper, H.: Knowledge transfer applying the structural Complexity Management approach. International Conference on Information Retrieval & Knowledge Management (CAMP’10), 201017.- 8.03.2010 mehr…
  • McKay, A.; Chase, S. C.; Garner, S.; Jowers, I.; Prats, M.; Hogg, D. C.; Chau, H. H.; de Pennington, A.; Earl, C.: Design synthesis and shape generation. In: Inns, T. (Hrsg.): Designing for the 21st Century: Interdisciplinary Methods and Findings. Gower Publishing, Aldershot, 2010, 304-321 mehr…
  • Metzler, Torsten; Shea, Kristina: Cognitive Products: Definition and Framework. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010, 865 - 874 mehr…
  • Müller,U.C.; Baier,H.; Zäh,T.; Müller,S.; Koch,A.: Vibration and Shape Control in Opto-Mechanical Systems Using Distributed Fiber-Optic Bragg Grating Sensors. Journal of Vibration and Control, Vol. 16, No. 4, April , pp 539-554 2010, , 2010 mehr…
  • Müller,U.C.; Both,J.; Roths,J.; Baier,H.: High-Precision Thermal Strain Measurements Using Sufface-Mounted Fiber Bragg Grating Sensors. SPIE Smart Structures/NDE 2010, San Diego, 2010 mehr…
  • Naß, Alexander; Petermann, Markus; Schenkl, Sebastian: Vermeidung ungewollten Transfers von Know-how in CAD-Modellen. CiDaD Working Paper Series 6 (1), 2010, 9-10 mehr…
  • Orawski, Robert; Hepperle, Clemens; Mörtl, Markus; Lindemann, Udo: Matching product flexibility on the integrated portfolio of a product-service-system. 2nd CIRP Industrial Product-Service Systems Conference, Linköping University 2010, 201013.-17.04.2010, 269 - 274 mehr…
  • Orawski, Robert; Hepperle, Clemens; Mörtl, Markus; Lindemann, Udo: A framework for a product-service-system portfolio: managing the early planning. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010, 371 - 380 mehr…
  • Parvan, M.; Maurer, M.; Lindemann, U.: Software wizard design for complexity management application. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010, 1-10 mehr…
  • Perterer,M.; Höchtl,F.; Kiefmann,A.; Baier,H.; Senner,V.: Ultrasonic And Thermographic Monitoring of Impact induced damage of CFRP Structures. SAMPE 2010 Spring Conference 2010, Seattle, 2010 mehr…
  • Perterer,M.; Kuhn,T.; Baier,H.: Konstruktions- und Prüfverfahren zur ganzheitlichen Entwicklung und Bewertung von Luftschiffstrukturen. DGLR Workshop XII - Luftfahrzeuge leichter als Luft 2010, Bremen, 2010 mehr…
  • Petermann, Markus; Meiwald, Thomas; Lindemann, Udo: Transferring knowledge of product creation - motivations and consequences. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Petermann, Markus; Meiwald, Thomas; Lindemann, Udo: Share it or not? – A framework for the transfer of product creation knowledge. 8th NordDesign Conference, Chalmers University of Technology, 201024.-27.8.2010 mehr…
  • Petermann, Markus; Meiwald, Thomas; Lindemann, Udo: Inter-firm knowledge transfer in the industrial goods industry – An empirical study of distribution and protection mechanisms. International Forum on Knowledge Asset Design, Università degli Studi della Basilicata, 201024.-26.06.2010 mehr…
  • Petersson,Ö.; Leitner,M.; Stroscher,F.: Structural optimization framework for aircraft subject to transient maneuver and gust loads. 13th AIAA / ISSMO Multidisciplinary Analysis and Optimization Conference 2010, Fort Worth TX, 2010 mehr…
  • Petersson,Ö.; Stroscher,F.; Baier,H.: Multidisciplinary Optimisation of Aircraft Wings including gust loads. 2nd RAeS Aircraft Structural Design Conference 2010, London , 2010 mehr…
  • Pfeiffer,A.; Lee,J.; Han,J.; Baier,H.: Ornithropter Flight Simulation Based on Flexible Multi-Body Dynamics. Journal of Bionic Engineering, 7, pp. 102-111 2010, , 2010 mehr…
  • Prats, M.; Jowers, I.; Pedreira, N.; Garner, S.; McKay, A.: Interpretation of Geometric Shapes – an Eye Movement Study. Proceedings of the 2010 Symposium on Eye-Tracking Research & Applications,, ACM, 201022.-24.03.2010, 243-250 mehr…
  • Rapp,S.; Baier,H.: "Integrated fiber optic sensors for hot spot detection and temperature field reconstruction in satellites". Smart materials and Structures 19 (2010) 075007 2010, , 2010 mehr…
  • Rapp,S.; Baier,H.: Determination of recovery energy densities of shape memory polymers via closed loop, force controlled recovery cycling. Smart Materials and Structures, Vol. 19, 045018 2010, 2010 mehr…
  • Rapp,S.; Baier,H.: "Shape Memory Polymer Actuators for Shape Adjustment of Fiber Composite Parts. Actuator 2010, P080, p. 854-857 2010, Bremen, 2010 mehr…
  • Reinicke,G.; Yoo,E.; Baier,H.: Active Vibration Damping of large Satellite Solar Array Panels. 21st International Conference on Adaptive Structures and Technologies 2010, Pennsylvania, USA, 2010 mehr…
  • Roelofsen, Julia; Lindemann, Udo: A framework for situation specific planning of product development processes. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Rössler,C.; Schömann,J.; Baier,H.: Aerospace application of hydrogen and fuel cells. 18th World Hydrogen Conference 2010, Essen, 2010 mehr…
  • Schenkl, Sebastian; Kissel, Maximilian; Hepperle, Clemens; Lindemann, Udo: Communication paths in biomimetic design – supporting a model-based interdisciplinary information transfer. 8th NordDesign Conference, Chalmers University of Technology, 201025.-27.08.2010, 499-506 mehr…
  • Schenkl, Sebastian; Petermann, Markus; Meiwald, Thomas: ConImit - Innovationsplattform für präventiven Produktschutz. CiDaD Working Paper Series 6 (1), 2010, 11-12 mehr…
  • Schreider,L.; Faro,I.; Depeyre,S.; Belloeil,V.; Datashvili,L.; Baier,H.; Hoffmann,J.; Wei,B.: Potential Membrane Technologies for in Orbit Reconfigurable Reflector. ESA Antenna Workshop 2010, Noordwijk, 2010 mehr…
  • Schröer, Bernd; Herberg, Arne; Daniilidis, Charalampos; Frackenpohl, Thorsten; Lindemann, Udo: Bringing together ID and ED education. 12th International Conference on Engineering and Product Design Education, The Design Society, 201002.-03.09.2010 mehr…
  • Schröer, Bernd; Kain, Andreas; Lindemann, Udo: Supporting creativity in conceptual design: Method 635-extended. 11th International Design Conference DESIGN 2010, 201017.-20.05.2010 mehr…
  • Schröer, Bernd; Lindemann, Udo: Industrial Design Engineering an der TU München. 4. Symposium Technisches Design Dresden, TUDpress, 201024.-25.09.2010, 291-309 mehr…
  • Shea, Kristina: The cognitive factory. Advanced Engineering Informatics 24 (3), 2010, 241-242 mehr…
  • Shea, Kristina; Ertelt, Christoph; Gmeiner, Thomas; Ameri, Farhad: Design-to-fabrication automation for the cognitive machine shop. Advanced Engineering Informatics 24 (3), 2010, 251-268 mehr…
  • Steinhauer, Markus; Shea, Kristina: Efficient Design Space Exploration and Optimization of PHEV Architectures. Design for X, Beiträge zum 21. DfX-Symposium, TuTech Verlag, 2010, 247-258 mehr…
  • Stroscher,F.; Petersson,Ö.; Leitner,M.: "Aircraft Structural Optimization Subject to Flight Loads: Application to a Wide Body Commercial Aircraft Configuration". 1. EASN Workshop on Aerostructures 2010, Paris, 2010 mehr…
  • Wedekind,M.; Both,J.; Baier,H.: Thermo Mechanical Behaviour of Metal Matrix Composite Structures. 13th ESAFORM 2010 conference on material forming 2010, Brescia, 2010 mehr…
  • Wildschek,A.; Stroscher,F.; Klimmek,T.: Gust load alleviation on a large blended wing body airliner. 27th International Congress of the Aeronautical Sciences 2010, , 2010 mehr…
  • Wittmann,J.; Hornung,M.; Baier,H.: Mission performance optimization via morphing wing tip devices. Proc. DGLR-Jahrestagung 2010, Hamburg, 2010 mehr…
  • Xu,Q.; Wehrle,E.; Baier,H.: "Investigation of Surrogate Model Based Structural Design Optimization". ParaoptX 2010, Karlsruhe, 2010 mehr…
  • Yoo, Eunjung: Parametric Model Order Reduction for Structural Analysis and Control. Dissertation, 2010 mehr…
  • Zaeh, Michael F.; Reinhart, G.; Lindemann, Udo; Karl, Florian; Biedermann, Wieland: Evaluating the Innovation Ability of Manufacturing Resources. World Academy of Science, Engineering and Technology (72), 2010, 142-148 mehr…
  • Zauner, Christoph: Zur Modellierung und Reduktion schockinduzierter Strukturschwingungen und deren Nutzung zur Schadensindikation. Dissertation, 2010 mehr…
  • Zirkler, Stefanie Constanze: Transdisziplinäres Zielkostenmanagement komplexer mechatronischer Produkte. Dissertation, 2010 mehr…

2009

  • Kreimeyer, M.; Maier, J.; Fadel, G.; Lindemann, U. (Hrsg.): Proceedings of 11th International DSM Conference. Hanser, 2009 mehr…
  • Antonelli,V.; Carbone,R.; Lindstedt,S.; Marissen,R.: Pressure distibution and surface quality during forming of thermoplastic composites with a collection of rubber particles as mould half. 17th International Conference on Composite Material ICCM 2009, Edinburgh, 2009 mehr…
  • Antonelli,V.; Decoster,D.; Carbone,R.; Marissen,R.: The Influence of Rubber Properties During Hylid Forming. SAMPE Europe Conference, 23.-25.3. 2009, Paris, 2009 mehr…
  • Baier,H.; Datashvili,L.; Hoffmann,J.;: Mechanically Reconfigurable and Massively Shape Morphing Space Structures. 11th European Spacecraft Structures, Materials and Mechanical Testing Conference (ESSMMT), 15.-17.09. 2009, Toulouse, 2009 mehr…
  • Baier,H.; Datashvili,L.; Hoffmann,J.; Kuhn,T.: Large Membrane Space Reflectors. International Conference on Textile Composites and Inflatable Structures (Structural Membranes 2009), 05 - 07. Oktober 2009, Stuttgart, 2009 mehr…
  • Baier,H.; Datashvili,L.; Rapp,S.: Enhancing space satellite performance by integrating smart sensors and actuators for sensing and shape morphing. 2nd International Conference on Smart Materials and Nanotechnology in Engineering (8.-11.7.) 2009, Weihai, China, 2009 mehr…
  • Baier,H.; Datashvili,L.; Rapp,S.; Hoffmann,J.: "Shape Morphing and Contol of Flexible Surfaces for Aerospace Applications". International Scientific Conference on Advanced Lightweight Structures and Reflector Antennas, 14 - 16 Oktober 2009, Tbilisi, Georgien, 2009 mehr…
  • Biedermann, Wieland; Kreimeyer, Matthias; Lindemann, Udo: Measurement System to Improve Data Acquisition Workshops. 11th International DSM Conference, Hanser, 200912.-13.10.2009, 119-130 mehr…
  • Biedermann, Wieland; Strattner, Martin; Maurer, Maik; Lindemann, Udo: Design and Implementation of the GUI of a Software Tool for Structural Complexity Management. International Conference on Integration of Design, Engineering and Management for Innovation, self published, 2009 mehr…
  • Both,J.; Wedekind,M.; Baier,H.: Computational and Experimentel Characterization of Laminated and Extruded Metal-CFRP Composite Materials and Components. EUCOMAS 2009, Augsburg, 2009 mehr…
  • Braun, Stefanie C.; Lindemann, Udo: How to Generate Design Rules for Cost-Efficient Design of Mechatronic Products. 17th International Conference on Engineering Design, Design Society, 200924.-27.08.2009 mehr…
  • Braun, Stefanie C.; Lindemann, Udo: Der Zusammenhang zwischen Komplexität und Kosten als Basis von Handlungsanweisungen zur kostenoptimierten Gestaltung mechatronischer Produkte. 6. Paderborner Workshop - Entwurf mechatronischer Systeme, Heinz Nixdorf Institut, 200902.-03.04.2009, 351-366 mehr…
  • Bueso Bello,J.L.; Dietrich,B.A.; Jochim,F.; Neff,T.; Datashvili,L.: Multi Application Purpose SAR (MAPSAR) Mission - ongoing Work during Phase B. XIV Brazilian Remote Sensing Symposium (SBSR), 25.-30.4. 2009, Natal, Brazil, 2009 mehr…
  • Carbone, R.; Antonelli, V.; Langella, A.; Marissen, R.: Numerical Study for Rubber Particles Collection Involvend in New Thermoforming Composite Process Using Comsol Multiphysics. Comsol User Conference, 2009 mehr…
  • Carbone,R.; Antonelli,V.; Langella,A.; Marissen,R.: Numerical Study for Rubber Particles Collection Involved in New Thermoforming Composite Process Using Comsol Multiphysics. Comsol User Conference (14.-15.10.) 2009, Milan, 2009 mehr…
  • Daniilidis, Charalampos; Eben, Katharina; Lindemann, Udo: A functional analysis approach for product reengineering. TRIZfuture Conference 2009, Editura Politehnica, 2009 mehr…
  • Datashvili,L.: Review and Evaluation of the Existing Designs / Technologies for Space Large Deployable Apertures. International Scientific Conference on Advanced Lightweight Structures and Reflector Antennas, 14 - 16 Oktober 2009, Tbilisi, Georgien, 2009 mehr…
  • Datashvili,L.; Baier,H.: Space Applicable Antenna Reflectors with Flexible Shell-membrane Reflecting Surface. International Scientific Conference on Advanced Lightweight Structures and Reflector Antennas, 14 - 16 Oktober 2009, Tbilisi, Georgien, 2009 mehr…
  • Datashvili,L; Baier,H.: Large Membrane Reflectors. 3rd European Conference on Antennas and Propagation - EuCAP (23.-27.3.) 2009, Berlin, 2009 mehr…
  • Dick, Birgit: Untersuchung und Modell zur Beschreibung des Einsatzes bildlicher Produktmodelle durch Entwicklerteams in der Lösungssuche. Dissertation, 2009 mehr…
  • Diehl, Holger: Systemorientierte Visualisierung disziplinübergreifender Entwicklungsabhängigkeiten mechatronischer Automobilsysteme. Dissertation, 2009 mehr…
  • Diepold, Klaus Jürgen; Winkler, Franz; Lohmann, Boris; Kortler, Sebastian: A Framework for DSM-Based Pre-Modelling Analysis of Complex Systems. 11th International DSM Conference, Hanser, 200912.-13.10.2009, 27 - 39 mehr…
  • Eben, Katharina; Daniilidis, Charalampos; Lindemann, Udo: Problem solving for multiple product variants. TRIZfuture Conference 2009, Editura Politehnica, 2009, 54-61 mehr…
  • Ehrlenspiel, Klaus: Integrierte Produktentwicklung - Denkabläufe, Methodeneinsatz, Zusammenarbeit. Hanser (4., aktualisierte. Aufl.), 2009 mehr…
  • Ertelt, Christoph; Gmeiner, Thomas; Shea, Kristina: A Flexible Fixture and Reconfiguration Process for the Cognitive Machine Shop. 3rd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2009), 200905.-07.10.2009 mehr…
  • Ertelt, Christoph; Rühr, Thomas; Pangercic, Dejan; Shea, Kristina; Beetz, Michael: Integration of Perception, Global Planning and Local Planning in the Manufacturing Domain. 14th IEEE International Conference on Emerging Technologies and Factory Automation, 200922.-26.09.2009 mehr…
  • Ertelt, Christoph; Shea, Kristina: An application of shape grammars to planning for CNC machining. ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, 200930.08.-02.11.2009 mehr…
  • Franke, S.; Kirschner, R.; Kain, A.; Becker, I.; Lindemann, U.: Managing early phases of innovation processes and the use of methods within - empirical results from an industry survey. 17th International Conference on Engineering Design, 200924.-27.08.2009 mehr…
  • Gaag, Andreas; Kohn, Andreas; Lindemann, Udo: Function-based Solution Retrieval and Semantic Search in Mechanical Engineering. 17th International Conference on Engineering Design, Design Society, 200924.-27.08.2009 mehr…
  • Gogava,Z.; Medzmariashvili,E.; Baier,H.; Tan,H.; Griebel,H.;: Space Deployable Parabolic Antenna-Solar Concentrator. International Scientific Conference on Advanced Lightweight Structures and Reflector Antennas, 14 - 16 Oktober 2009, Tbilisi, Georgien, 2009 mehr…
  • Gorbea, C.; Fricke, E.; Lindemann, U.: Life Cycle Cost Modeling of Hybrid Vehicles During Early Product Architecture Development. ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, ASME, 200930.08.-02.09.2009 mehr…
  • Gorbea, C.; Lindemann, U.; Fricke, E.: Innovation and Vehicle Architecture Development in A New Age of Architectural Competition. 17th International Conference on Engineering Design, Design Society, 200924.-27.08.2009 mehr…
  • Graebsch, Martin; Deubzer; Frank; Lindemann, Udo: Graph Representation of Physical Effects Networks in Conceptual Design. 17th International Conference on Engineering Design, Design Society, 200924.-27.08.2009, Seitenzahlen von - bis mehr…
  • Gürtler, Matthias: Verknüpfung unterschiedlicher Sichten auf Entwicklungsprozesse: Matrix-basierter Umgang mit Entscheidungspunkten. In: S., Buchenau G. und Rietz (Hrsg.): Geschäftsprozesse im Projektmanagement. Diplomica Verlag, 2009 mehr…
  • Gürtler, Matthias; Kreimeyer, Matthias; Lindemann, Udo: Extending the Active / Passive Sum Measure to Include Boolean Operators: A Case Study. 11th International DSM Conference, Hanser, 200912.-13.10.2009, 79-92 mehr…
  • Han,J.-H.; Baier,H.; Pfeiffer,A.: Ornithopter Flight Simulation considering Flexible Multi-body Dynamics. accepted for publication in Journal of Bionic Engineering 2009, , 2009 mehr…
  • Havryliv, Mark; Geiger, Florian; Guertler, Matthias; Naghdy, Fazel; Schiemer, Greg: The Carillon and Its Haptic Signature: Modeling the Changing Force-Feedback Constraints of a Musical Instrument for Haptic Display – 10. In: Altinsoy, M. Ercan; Jekosch, Ute; Brewster, Stephen (Hrsg.): Haptic and Audio Interaction Design. Springer Berlin Heidelberg, 2009, 91-99 mehr…
  • Heisig, Peter; Clarkson, Peter John; Hemphälä, Jens; Wadell, Carl; Bergendahl, Margareta Norell; Roelofsen, Julia; Kreimeyer, Matthias; Lindemann, Udo: Challenges and Future Fields of Research for Modelling and Management of Engineering Processes - Report from Workshops with Industry and Academia. Cambridge University Engineering Department, Engineering Design Centre (2. Aufl.), 2009 mehr…
  • Hellenbrand, D.; Lindemann, U.: Systematic Identification of Representative Solutions to support the Concept Selcetion Phase. 17th International Conference on Engineering Design, Design Society, 200924.-27.08.2009 mehr…
  • Hellenbrand, David; Helten, Katharina: VireS – Virtuelle Synchronisation von Produkt- und Produktionssystementwicklung. CiDaD News (Januar 2009 – Jahrgang 06 – Nr. 01), 2009 mehr…
  • Helms, Bergen; Eben, Katharina; Shea, Kristina; Lindemann, Udo: Graph Grammars - A Formal Method for Dynamic Structure Transformation. 11th International DSM Conference, Hanser, 200912.-13.10.2009, 93-103 mehr…
  • Helms, Bergen; Shea, Kristina; Hoisl, Frank: A Framework for Computational Design Synthesis Based on Graph-Grammars and Function-Behavior-Structure. ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 200930.08.-02.09.2009 mehr…
  • Helten, Katharina; Hellenbrand, David; Lindemann, Udo: Robust Product Concepts - An Approach to Assess Concept Suitability for Production in Early Design Phases. 3rd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2009), 200905.-27.10.2009, 498-507 mehr…
  • Helten, Katharina; Hellenbrand, David; Lindemann, Udo: Product Robustness as a Basis for the Improvement of Production Planning Processes - Key Factors in Early Design Phases. 17th International Conference on Engineering Design, Design Society, 200924.-27.08.2009, 197-206 mehr…
  • Hepperle, Clemens; Deubzer, Frank; Wiedemann, Patrick; Lindemann, Udo; Liebl, Johannes; Hallmannsegger, Michael; Hübner, Walter: Customer perception of vehicle dynamics and its transfer to technical characteristics. 17th International Conference on Engineering Design, Design Society, 200924.-27.08.2009 mehr…
  • Hepperle, Clemens; Eben, Katharina; Lindemann, Udo: Elements and ways of integrated product development education - current and future challenges. 11th International Conference on Engineering and Product Design Education (EPDE), 200910.-11.11.2009 mehr…
  • Hepperle, Clemens; Thanner, Stefan; Mörtl, Markus; Lindemann, Udo: An integrated product lifecycle model and interrelations in-between the lifecycle phases. 6th International Conference on Product Lifecycle Management, Inderscience Enterprises Ltd., 200906.-08.07.2009 mehr…
  • Hoisl, Frank: Integrating Computer Aided Design and Shape Grammars for Computational Design Synthesis. forum 3D 2009 3D-Technologien an der Technischen Universität München, Shaker Verlag, 200902.04.2009, 93 - 104 mehr…
  • Hoisl, Frank; Shea, Kristina: Exploring the Integration of Spatial Grammars and Open-Source CAD Systems. 17th International Conference on Engineering Design, Design Society, 200924.-27.08.2009, 6-427 - 6-438 mehr…
  • Huber,M.; Wehrle,E.; Baier,H.: Entwurfsoptimierung. Fortschrittsberichte VDI Reihe 2, Nr. 668, S. 257-274 2009, Düsseldorf, 2009, mehr…
  • Ihle,A.; Ernst,T.; Baier,H.; Datashvili,L.; Hoffmann,J.; Göransson,P.; Fasold,D.; Portela,P.; Santos,M.; Santiago-Prowald,J.: Large Porous Antenna and Spacecraft Structures: Themo-Elastic and Vibro-Acoustic Modelling and Verification Via Tests. 11th European Spacecraft Structures, Materials and Mechanical Testing Conference (ESSMMT), 15.-17.09. 2009, Toulouse, 2009 mehr…
  • Ilie, D.; Kain, A.; Lindemann, U.: Evaluation and prioritization of cross-linked requirements in the automotive development process. ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference(IDETC/CIE 2009), 200930.08.-02.09.2009 mehr…
  • Kain, A.; Gaag, A.; Lindemann, U.; Roesch, O.; Bonin, T.; Zaeh, F. M.: Matrix-based product representation to support flexible multibody simulation. ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference(IDETC/CIE 2009), 200930.08.-02.09.2009 mehr…
  • Kain, A.; Kirschner, R.; Lindemann, U.; Gunkel, J.; Klendauer, R.; Schneider, M.; Wastian, M.: Innovation networks – approaches to derive participants and relations systematically. 17th International Conference on Engineering Design, 200924.-27.08.2009 mehr…
  • Kain, Andreas; Gaag, Andreas: Verknüpfung von systematischer Produktentwicklung und innovativen Simulationsmethoden. CiDaD News (Januar 2009 – Jahrgang 06 – Nr. 02), 2009 mehr…
  • Kain, Andreas; Gaag, Andreas; Lindemann, Udo: Product Representation to support validation of simulation models in Computer aided engineering. 6th International Conference on Informatics in Control, Automation and Robotics, 200902.-05.97.2009 mehr…
  • Kain, Andreas; Kirschner, Rafael; Goldt, Mathias; Lindemann, Udo; Gunkel, Jennifer; Klendauer, Ruth; Schneider, Michael; Wastian, Monika: A method to identify relevant stakeholders to be integrated in New Product Development processes. Research into Design, supporting multiple facets of product development, Research Publishing Service, 200907.-09.01.2009 mehr…
  • Kirschner, R.; Kain, A.: Wartezeit sinnvoll nutzen – mit Produktentwicklung! CiDaD News (Juli 2009 – Jahrgang 06 – Nr. 02 - ISSN 1610-3572), 2009 mehr…
  • Kirschner, R.; Kain, A.; Lindemann, U.: Innovationsnetzwerke als Ausgangspunkt für Kundeneinbindung in der Produktentwicklung. NEWS - Mitteilungen des Berliner Kreises. ISSN 1613-5504 (1/2009), 2009, 1-2 mehr…
  • Kirschner, Rafael: Neue Bordnetze für elektrifizierte Fahrzeuge. CiDaD News (Januar 2009 – Jahrgang 06 – Nr. 02), 2009 mehr…
  • Kirschner, Rafael; Kain, Andreas; Lindemann, Udo; Gunkel, Jennifer; Klendauer, Ruth; Schneider, Michael; Wastian, Monika: An approach to identify optimal phases of NPD processes to integrate stakeholders. Research into Design, supporting multiple facets of product development, Research Publishing Service, 200907.-09.01.2009 mehr…
  • Kirschner, Rafael; Kain, Andreas; Pfab, Christian: Fruitpresso – Frische Ideen für die Forschung. CiDaD News (Januar 2009 – Jahrgang 06 – Nr. 01), 2009 mehr…
  • Klammer, Jesko: Strukturmechanik und Vibroakustik von CFK-Flugzeugrümpfen. Dissertation, 2009 mehr…
  • Kohn, Andreas; Lindemann, Udo: Combination of algorithms and visualization techniques considering user requirements - a case study. 11th International DSM Conference, Hanser, 200912.-13.10.2009, 207-220 mehr…
  • Kortler, Sebastian; Kreimeyer, Matthias; Lindemann, Udo: A Planarity-Based Complexity Metric. 17th International Conference on Engineering Design, Design Society, 200924.-27.08.2009 mehr…
  • Krehmer, Hartmut; Eckstein, Raiko; Lauer, Wolfgang; Roelofsen, Julia; Stöber, Christina; Troll, Alexander; Weber, Nadine; Zapf, Jochen: Coping With Multidisciplinary Product Development - A Process Model Approach. 17th International Conference on Engineering Design, Design Society, 200924.-27.08.2009, 1-241 - 1-252 mehr…
  • Kreimeyer, Matthias: Durchblick für Produktentwickler. TUM Campus (4), 2009, 33 mehr…
  • Kreimeyer, Matthias: The New Community Portal DSMweb.org. 11th International DSM Conference, Hanser, 200912.-13.10.2009, 9-12 mehr…
  • Kreimeyer, Matthias; Braun, Stefanie; Gürtler, Matthias; Lindemann, Udo: Extending Multiple Domain Matrices to Allow for the Modeling of Boolean Operators in Process Models. 17th International Conference on Engineering Design, Design Society, 200924.-27.08.2009, 1-12 mehr…
  • Kuhn,T.; Baier,H.; Datashvili,L.: Charcterization of Membranes for Multidisciplinary Modeling Approaches. International Scientific Conference on Advanced Lightweight Structures and Reflector Antennas, 14 - 16 Oktober 2009, Tbilisi, Georgien, 2009 mehr…
  • Lang, Michael: Integrierte Modellierung für Strukturentwurf und thermoelastische Auslegung von Satellitenreflektoren. Dissertation, 2009 mehr…
  • Langer, Stefan; Hepperle, Clemens: Wissenschaftliche Mitarbeiter im Tutorensystem Garching - Zentrale Aspekte der Betreuung. Zündschlüssel, 2009, 8 mehr…
  • Langer, Stefan; Lindemann, Udo: Managing Cycles in Development Processes - Analysis and Classification of External Context Factors. 17th International Conference on Engineering Design, Design Society, 200924.-27.08.2009, 1-539 - 1-550 mehr…
  • Lauer, Wolfgang; Lindemann, Udo: Dynamic Linking And Retrieval Of Product Models To Product Development Processes. 17th International Conference on Engineering Design, Design Society, 200924.-27.08.2009, 8-31 - 8-42 mehr…
  • Lin, Yi-shih; Shea, Kristina; Johnson, Aylmer; Coultate, John; Pears, Jamie: A Method and Software Tool for Automated Gearbox Synthesis. ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, 200930.08.-02.11.2009 mehr…
  • Lindemann, Udo: Methodische Entwicklung technischer Produkte. Springer (3., korrigierte. Aufl.), 2009 mehr…
  • Lindemann, Udo; Maurer, Maik; Braun, Thomas: Structural Complexity Management - An Approach for the Field of Product Design. Springer, 2009 mehr…
  • Lorenzo,J.; Khureim Castiglioni,S.; Labiole,E.; Baudasse,Y.; Datashvili,L.; Kuhn,T.; Baier,H.; Mangenot,C.; Van\'t Klooster,K.; Fonseca,N.: "Very Large Antenna Apertures for Future Earth Observation Missions". International Scientific Conference on Advanced Lightweight Structures and Reflector Antennas, 14 - 16 Oktober 2009, Tbilisi, Georgien, 2009 mehr…
  • Maurer, M.; Biedermann, W.; Cole, M.; D’Avanzo, J.; Dickmanns, D.: Airport security: From single threat aspects to valid scenarios and risk assessment. 1st Annual Global Conference on Systems and Enterprises (GCSE), 200903.-04.12.2009 mehr…
  • Maurer, M.; Klinger, H.; Benz, A.: Applying the Structural Complexity Management to knowledge transfer in small and medium-sized companies. First International Conference on Innovation through Knowledge Transfer, Research with Impact, InnovationKT’09, 200902.12.2009 mehr…
  • Maurer, Maik; Biedermann, Wieland; Kuhlmann, Andreas; Braun, Thomas: The 2-tupel-constraint and how to overcome it. 11th International DSM Conference, Hanser, 200912.-13.10.2009 mehr…
  • Maurer, Maik; Braun, Thomas; Lindemann, Udo: Information visualization for the Structural Complexity Management Approach. 19th Annual International Symposium of INCOSE, INCOSE, 200920.-23.07.2009 mehr…
  • Müller, Maximilian: MOTICON – Knowledge Integrated Sports Equipment. CiDaD News (Januar 2009 – Jahrgang 06 – Nr. 01), 2009 mehr…
  • Nathrath,N.; Trümper,M.; Rapp,S.; Harder,J.; Walter,U.: Manufacturing Technologies for LISA. 3rd European Conference on Antennas and Propagation (EUCAP) 2009, Berlin, 2009 mehr…
  • Perterer,M.; Kuhn,T.; Baier,H.: Verbundprojekt: ProKnoS - Ganzheitliche Prozessgestaltung für werkstoffhybride Knotenstrukturen – Schlussbericht zum BMWF Förderkennzeichen 20W0602B. verfügbar über Technische Informationsbibliothek Hannover - Deutsche Forschungsberichte (pdf & hardcopy), 2009 mehr…
  • Perterer,M.; Höchtl,F.; Blümel,M.; Kiefmann,A.; Baier,H.; Senner,V.;: Einsatzmöglichkeiten von kosteneffizienten Zerstörungsfreien Prüfmethoden (ZfP) am Beispiel CFK-Fahrradrahmen. DVM Workshop - Prüfverfahren und Qualitätssicherungsmethoden unter Berücksichtigung von CFK-Werkstoffen 2009, Berlin, 2009 mehr…
  • Perterer,M.; Kuhn,T.; Baier,H.: Aktive Thermographie zur Fehleridentifikation an Luftschiffstrukturen. DGLR Workshop XI - Luftfahrzeuge leichter als Luft 2009, Friedrichshafen, 2009 mehr…
  • Petermann, Markus; Meiwald, Thomas: Know-how-Schutz schon in der Entwicklung. CiDaD News (Januar 2009 – Jahrgang 06 – Nr. 02), 2009 mehr…
  • Petermann, Markus; Meiwald, Thomas; Lindemann, Udo: Decision Support for the Selection of Anti-Counterfeiting Measures Based on Modeling Damage Functions. 17th International Conference on Engineering Design, 200924.-27.08.2009 mehr…
  • Petersson,Ö.: Optimization of aircraft wings including dynamic aeroelasticity and manufacturing aspects. 5th AIAA Multidisciplinary Design Optimization Specialist Conference (4.-7.5.) 2009, Palm Springs CA, 2009 mehr…
  • Prats, M.; Lim, S.; Jowers, I.; Garner, S. W.; Chase, S.: Transforming shape in design: Observations from studies of sketching. Design Studies 30 (5), 2009, 503-520 mehr…
  • Rapp,S.; Baier,H.: "Reconstruction of Temperature and Displacement Fields in Satellite Sandwich Panels based on Integrated Fiber Optic Sensors". Smart Structures and Materials 2009, San Diego, 2009 mehr…
  • Rapp,S.; Baier,H.: New materials and structural concepts for compact waveguide antennas including shape memory polymers for actuation. European Conference of Spacecraft Structures, Materials & Mechanical Testing (15.-17.9.) 2009, Toulouse, 2009 mehr…
  • Rapp,S.; Baier,H.; Zuknik,K.-H.; Reutlinger,A.: "Temperature Monitoring in Satellite Sandwich Panels using Integrated Fiber Optic Sensors. ESA workshop on Fiber Optic Sensors for Space Application, Poster Presentation, 17.-19.07. 2009, Noordwijk, NL, 2009 mehr…
  • Rapp,S.; Kang,L.; Han,J.; Mueller,U.; Baier,H.: Deformation field estimation for a 2-dimensional structure using fiber Bragg grating sensors. Smart Materials and Structures, Vol. 18, Nr. 025006 2009,, 2009 mehr…
  • Roose,S.; Stockman,Y.; Rochus,P.; Kuhn,T.; Lang,M.; Baier,H.; Langlois,S.; Casarosa,G.: Optical methods for non contact measurements of membranes. Acta Astronautica, Vol. 65, Num 9-10, Nov. - Dez. 2009 , PP 1317-1329 (online: 10.1016/j.actaastro.2009.03.061), Elsevier 2009,, 2009 mehr…
  • Scharfenberger, C.; Daniilidis, C.; Fischer, M.; Hellenbrand, D.; Kuhl, P.; Richter, C.; Sabbah, O.; Strolz, M.; Färber, G.: Multidisziplinäre Entwicklung von neuen Türkonzepten als ein Teil einer ergonomisch optimierten Ein-/Ausstiegsunterstützung. OEM Forum Fahrzeugtüren und -klappen 2009, VDI-Verlag, 200913.-14.05.2009, 65 - 80 mehr…
  • Schröer, Bernd; Lindemann, Udo: Efficient Sport Product Development for Small Markets. 4th Asia Pacific Congress on Sports Technology, APCST 2009, RMIT University, Melbourne, Victoria 3000, Australia, 200921.09. - 23.09.2009, 441-446 mehr…
  • Shea, Kristina; Wölkl, Stefan; Helms, Bergen: Computer-Aided Concept Models and Methods for Vehicle Design. 2. Grazer Symposium Virtuelles Fahrzeug, 200927.-28.04.2009 mehr…
  • Stankovic, Tino; Shea, Kristina; Storga, Mario; Marjanovic, Dorian: Grammatical Evolution of Technical Processes. ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, 200930.08.-02.11.2009 mehr…
  • Stowe, Harold; Browning, Tyson; Maurer, Maik: The Real World does not like Complexity, but... 11th International DSM Conference, Hanser, 200912.-13.10.2009 mehr…
  • Stroscher, F.; Petersson, Ö.; Leitner, M.: Aeroelastische und ordnungsreduzierte Simulationsmodelle für Strukturoptimierung und Reglersimulation flexibler Flugzeug. Deutscher Luft- und Raumfahrtkongress, 2009 mehr…
  • Van't Klooster,K.; Medzmariashvili,E.; Tserodze,S.; Datashvili,L.; Tsignadze,N.: Large Deployable Reflector Configuration for Spacebased Applications in Telecommunications, Science, and Remote Sensing. International Scientific Conference on Advanced Lightweight Structures and Reflector Antennas, 14 - 16 Oktober 2009, Tbilisi, Georgien, 2009 mehr…
  • Watty, Robert; Kreimeyer, Matthias: Assessment of Theses - A Comparison of Current Approaches Practiced in Engineering Education. International Conference on Engineering and Product Design Education, The Design Society, 200910.-11.11.2009 mehr…
  • Wedekind,M.; Baier,H.: Modellierung und Identifikation von Steifigkeit und Festigkeit orthotroper Verbundprofile. VDI, 2009, mehr…
  • Wehrle,E.: "Possibilistic modeling of engineering uncertainty ". IIASA/GAMM Coping with Uncertainties 2009, Laxenburg, Österreich, 2009 mehr…
  • Wölkl, Stefan; Shea, Kristina: A Computational Product Model for Conceptual Design Using SysML. ASME 2009 International Design Engineering Technical Conferences, Verlagsname, 200930.08.-02.09.2009, Seitenzahlen von - bis mehr…

2008

  • Kreimeyer, M.; Lindemann, U.; Danilovic, M. (Hrsg.): Proceedings of 10th International DSM Conference. Hanser, 2008 mehr…
  • Abuosba, M.; Gaag, A.; Franz, J.: Semantic Knowledge Management – Erschließung von Lösungswissen in der Automatisierungsindustrie. KnowTech 2008: Erhöhen Sie Ihren BQ*, CMP-WEKA, 200808-09. Oktober 2008 mehr…
  • Baier,H.; Datashvili,L.; Schimitschek,J.: Massive shape adaptivitiy in shell-membranes. Proc. Int. Conf. on Comput. and Exp. Science, 2008 mehr…
  • Baier,H.; Huber,M.; Langer,H.: Design optimization of hybrid material structures. Structural and Multidisciplinary Optimization, 2008 mehr…
  • Baier,H.; Mueller,U.; Rapp,S.: Fibre optic sensor networks for monitoring displacement and temperature fields in smart structures. Proc. SPIE Conf. on Smart Structures and Materials, 2008 mehr…
  • Baier,H.; Datashvili,L.: Scalable and stowable precision antenna reflectors. Proc. ESA Conf. on Antennas, 2008 mehr…
  • Baier,H.; Datashvili,L.; Rapp,S.: Smart membranes for aerospace applications. Journal of Smart Materials and Structures, 2008 mehr…
  • Biedermann, W.; Lindemann, U: Cycles in the multiple-domain matrix - Interpretation and applications. 10th International DSM Conference, 2008 mehr…
  • Braun, Stefanie C.; Lindemann, Udo: The Influence of Structural Complexity on Product Costs. IEEE International Conference on Industrial Engineering and Engineering Management, 200808.-11.12.2008, Seitenzahlen von - bis mehr…
  • Braun, Stefanie C.; Lindemann, Udo: Anforderungen und Unterstützung eines Multidisziplinären Kostenmanagements. 19. Symposioum Design for X, 20089.-10.10.2008, 45-56 mehr…
  • Braun, Stefanie; Biedermann, Wieland; Lindemann, Udo: Design to Cost: New Impulses for Target Costing. 10th International Design Conference DESIGN 2008, The Design Society, 200819 - 22.08 2008 mehr…
  • Datashvili,L.: Multifunctional Dimensionally Stable Flexible Composite for Space Applications. Proceedings of the 59 th International Astronautical Congress 2008, 2008 mehr…
  • Datashvili,L.; Baier,H.: Shell-Membrane Reflecting Surface Material for Deployable and Transformable Space Reflectors. Proc. ESA Conf. on Antennas, 2008 mehr…
  • Datashvili,L.; Baier,H.: Precision Deployable Shell-Membrane Antenna Reflector for Space Applications. Proceedings of the 59th International Astronautical Congress 2008, 2008 mehr…
  • Decoster, D.; Antonelli, V.; Marissen, R.; Beukers, A.: Hylid forming an innovation in the rubber press forming of thermoplastic composites. SAMPE Europe 29th International Conference, 2008 mehr…
  • Diehl, Holger; Hellenbrand, David; Lindemann, Udo: Transparent 3D Visualization of machatronic systemstructures. 10th International Design Conference DESIGN 2008, The Design Society, 200819 - 22.05 2008 mehr…
  • Eben, K.; Biedermann, W.; Lindemann, U.: Modeling structural Change over Time – requirements and first methods. 10th International DSM Conference, 2008November 11 - 12, 2008 mehr…
  • Engelhard, Marco; Shea, Kristina: Semantic Web Services for the Cognitive Machine Shop. 1st International Workshop on Cognition for Technical Systems, 200806.-07.10.2008 mehr…
  • Ertelt, Christoph; Engelhard, Marco: Next Generation Fabrication. CiDaD News 5 (1), 2008, 4 mehr…
  • Ertelt, Christoph; Shea, Kristina: Generative design and CNC fabrication using shape grammars. ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, 2008August 3-6 mehr…
  • Fischer, M.; Braun, S.; Hellenbrand, D.; Richter, C.; Sabbah, O.; Scharfenberger, C.; Strolz, M.; Kuhl, P.; Färber, G.: Multidisciplinary development of new door and seat concepts as part of an ergonomic ingress/egress support system. The FISITA World Automotive Congress, FISITA (UK) Limited, 30 Percy St, London W1T 2DB, United Kongdom, 200814-19.09.2008 mehr…
  • Franz, J.; Gaag, A.; Abuosba, M.: The Semantic Enterprise - bringing Meaning to Business Processes. 14th International Conference on Concurrent Enterprising (ICE2008), Centre for Concurrent Enterprising, Univ. of Nottingham, 200823-25 June 2008 mehr…
  • Gaag, A.; Kohn, A.: Semantische Funktionsmodellierung als Basis zur Lösungs- und Anwendungssuche im Maschinen- und Anlagenbau. Design for X, Beiträge zum 19. Symposium, Lehrstuhl für Konstruktionstechnik, 200809.-10.10.2008, S. 119 ff mehr…
  • Gaag, A.; Kohn, A.; Franz, J.: Semantic Enterprise - Unleashing Solution Knowledge in the Area of Mechanical Engineering. 2nd European Semantic Technology Conference (ESTC 2008), 200824-26 September 2008 mehr…
  • Gaag, A.; Ponn, J: „Suchen und Finden“ im Maschinen- und Anlagenbau - Eine Studie in Zusammenarbeit mit dem VDMA. CiDaD Working Paper Series (4), 2008 mehr…
  • Gorbea, C.; Fricke, E.; Lindemann, U.: The Design of Future Cars in a New Age of Architectural Competition. 20th International Conference on Design Theory and Methodology (DTM), 20083-6 August 2008 mehr…
  • Gorbea, C.; Spielmannleitner, T.; Lindemann, U.; Fricke, E.: Analysis of Hybrid Vehicle Architectures Using Multiple Domain Matrices. DSM 09, 200811. - 12. November mehr…
  • Graebsch, Martin; Roelofsen, Julia; Lindemann, Udo: Lean Development in the Automotive Industry: The Snap-Shot Approach. The FISITA World Automotive Congress, 200814..19.09.2008 mehr…
  • Hellenbrand, David; Lindemann, Udo: Using the DSM to Support the Selection of Product Concepts. 10th International DSM Conference, Hanser, 200811. - 12.11.2008, 363-374 mehr…
  • Helms, Bergen: Gesamtfahrzeugsimulation von Traktoren mittels Co-Simulation. LANDTECHNIK 5, 2008 mehr…
  • Helms, Bergen; Shea, Kristina: Representing and Evolving Engineering Knowledge for Computational Design Synthesis. 3rd International Conference on Design Computing and Cognition (DCC 08), Springer, 200823 - 25.06. 2008 mehr…
  • Hepperle, Clemens; Mörtl, Markus; Lindemann, Udo: Innovation Cycles Concerning Strategic Planning of Product-Service-Systems. 10th International Design Conference DESIGN 2008, The Design Society, 200819 - 22.05. 2008 mehr…
  • Hoisl, Frank; Shea, Kristina; Helms, Bergen: Towards Representing, Evolving and Networking Engineering Knowledge for Computational Design Synthesis. 10th International Design Conference DESIGN 2008, The Design Society, 200819.-22.05. 2008, 793-800 mehr…
  • Hornung,C.; Pflanz,G.; Baier,H.: Adaptive feedforward control for active vibration reduction of convertible vehicles. Adaptronic Conf., 2008 mehr…
  • Huber,M.; Petersson,Ö.: Knowledge-based Modeling of Manufacturing Aspects in Structural Optimization Problems. Proceedings of EngOpt 2008 - International Conference on Engineering Optimization, 2008 mehr…
  • Huber,M.; Petersson,Ö.; Baier,H.: Knowledge-based Modeling of Manufacturing Aspects in Structural Optimization Problems. Advanced Materials Research (Vol.43), 2008, pp. 111-112 mehr…
  • Ilie, D.; Fischer, F.; Lindemann, U.: Analysis of the information environment in the context of target and requirements management in the automotive industry. ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, 20083-6 August 2008 mehr…
  • Jowers, I.; Prats, M.; Lim, S.; McKay, A.; Garner, S.; Chase, S.: Supporting reinterpretation in computer-aided conceptual design. Sketch Based Interfaces and Modeling, Eurographics Association, 200811.-13.06.2008, 151-158 mehr…
  • Kain, A.; Damm, T.: Innovationsprozesse im Fokus von AKINET. CiDaD News 5, 2008 mehr…
  • Kain, A.; Kirschner, R.; Lindemann, U.; Wastian, M.; Schneider, M.; Klendauer, R.; Gunkel, J.: An approach to model time dependent process-stakeholder networks. 10th International DSM Conference, 2008November 11 - 12, 2008 mehr…
  • Kain, Andreas; Hoisl, Frank; Shea, Kristina: A method and software prototype to support on-line planning on CNC machines. ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, ASME, 200803.08-06.08.2008 mehr…
  • Kirschner, R.; Damm, T.: AKINET – Aktive Kundeneinbindung in Innovationsnetzwerke. CiDaD News (5), 2008 mehr…
  • Kirschner, Rafael; Kain, Andreas; Franke, Stephan; Dick, Birgit; Lindemann, Udo: Active Customer Integration to Innovation Networks: A Project Outlook. 10th International Design Conference DESIGN 2008, The Design Society, 200819.05- 22.05 2008 mehr…
  • Kreimeyer, Matthias; Braun, Stefanie; Gürtler, Matthias; Lindemann, Udo: Relating two Domains via a Third – An Approach to Overcome Ambiguous Attributions using Multiple Domain Matrices. ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, ASME, 200803. - 06.08.2008t mehr…
  • Kreimeyer, Matthias; Daniilidis, Charampos; Lindemann, Udo: A Framework to Classify Process Improvement Projects. 10th International Design Conference DESIGN 2008, The Design Society, 200819. - 22.05 2008 mehr…
  • Kreimeyer, Matthias; Daniilidis, Charampos; Lindemann, Udo: A Procedural Model for Process Improvement Projects. Ediprod, Zielona Gora, 200810. - 12.09.2008, 275-282 mehr…
  • Kreimeyer, Matthias; Deubzer, Frank; Herfeld, U.; Lindemann, Udo: Effiziente Zusammenarbeit von Konstruktion und Berechnung. CADplus 3, 2008, 38-40 mehr…
  • Kreimeyer, Matthias; Deubzer, Frank; Herfeld, U.; Lindemann, Udo: Strategies Towards Maturity Of Product Information Objects To Manage Concurrent Engineering Processes. Tools and Methods of Competitive Engineering, Delft University of Technology, 200821.-25.04.2008 mehr…
  • Kreimeyer, Matthias; Gürtler, Matthias; Lindemann, Udo: Structural metrics for decision points within Multiple-Domain Matrices representing design processes. 2008 IEEE International Conference on Industrial Engineering and Engineering Management, IEEE, 200808-11.12. 2008 mehr…
  • Kreimeyer, Matthias; König, Carsten; Braun, Thomas: Structural Metrics To Assess Processes. 10th International DSM Conference, Hanser, 200811 - 12.11.2008, 245-259 mehr…
  • König, Carsten; Kreimeyer, Matthias; Braun, Thomas: Multiple-Domain Matrix As A Framework For Systematic Process Analysis. 10th International DSM Conference, Hanser, 200811 - 12.11.2008, 231-244 mehr…
  • Langer, Stefan; Kreimeyer, Matthias; Müller, P.; Lindemann, Udo; Blessing, L.: Entwicklungsprozesse hybrider Leistungsbündel – Evaluierung von Modellierungsmethoden unter Berücksichtigung zyklischer Einflussfaktoren. Dienstleistungsmodellierung - Methoden, Werkzeuge und Branchenlösungen, Physica, 200814.03.2008 mehr…
  • Lauer, Wolfgang; Faerber, M.; Roelofsen, Julia; Jochaud, F.; Jablonski, S.; Lindemann, Udo: Process Management System for the Integration of Situation Dependent Process Planning. 2008 IEEE International Conference on Industrial Engineering and Engineering Management, 200808-11.12. 2008 mehr…
  • Lauer, Wolfgang; Felgen, Luc; Ponn, Joseph; Hübner, Wolfgang; Lindemann, Udo: Support of the Product Development Process by a New Approach using Multiple Views on Physical Effects. The FISITA World Automotive Congress, FISITA (UK) Limited, 30 Percy St, London W1T 2DB, United Kongdom, 200814.-19.09. 2008 mehr…
  • Lauer, Wolfgang; Lindemann, Udo: Initial Steps of Developing a Process Integrative Structuring of Documents Containing Product Information. 10th International Design Conference DESIGN 2008, The Design Society, 200819. - 22.05. 2008 mehr…
  • Lim, S.; Prats, M.; Jowers, I.; Chase, S.; Garner, S.; McKay, A.: Shape exploration in design: formalising and supporting a transformational process. International Journal of Architectural Computing 6 (4), 2008, 415-433 mehr…
  • Lorenz, Markus: Handling of Strategic Uncertainties in Integrated Product Development. Dissertation, 2008 mehr…
  • Maier, A.; Kreimeyer, Matthias; Hepperle, Clemens; Eckert, C.; Lindemann, Udo; Clarkson, P. J.: Exploration of Correlations between Factors Influencing Communication in Complex Product Development. Concurrent Engineering: Research and Applications 1, 2008 mehr…
  • Maier, Anja; Kreimeyer, Matthias; LIndemann, Udo; Clarkson, P. J.: Reflecting communication: a key factor for successful collaboration between embodiment design and simulation. Journal of Engineering Design, 2008 mehr…
  • Maurer, Maik; Braun, Thomas: The Why-Matrix. 10th International DSM Conference, Hanser, 200811-12.11.2008 mehr…
  • McKay, A.; Jowers, I.; Chau, H. H.; de Pennington, A.; Hogg, D. C.: Computer aided design: an early shape synthesis system. In: Yan, X. -T.; Eynard, B.; Ion, W. J. (Hrsg.): Global Design to Gain a Competitive Edge: An Holistic and Collaborative Design Approach based on Computational Tools. Springer, 2008, 3-12 mehr…
  • Meiwald, Thomas; Petermann, Markus: Die richtigen Maßnahmen gegen Produktpiraterie ergreifen. ident 5, 2008, 52-53 mehr…
  • Meiwald, Thomas; Petermann, Markus; Gorbea, Carlos; Kortler, Sebastian: Fighting Product Piracy: Selecting action measures for OEMs based on links to situational influencing factors. Self-oprimizing Mechatronic Systems: Design the Future, W. V. Westfalia Druck GmbH, 200820.-21.02.2008 mehr…
  • Meiwald, Thomas; Petermann, Markus; Lindemann, Udo: Erstellung eines Schutzkonzeptes zur Vermeidung von Produktpiraterie. Industrie Management 6, 2008, 45-48 mehr…
  • Mueller,U.; Zeh,T.; Mueller,M.S.; Koch,A.W.; Baier,H.: Vibration and Shape Control in Opto-Mechanical Systems using distributed Fiber Optic Bragg Grating Sensors. Journal of Vibration and Control, 2008 mehr…
  • Perterer,M.; Müller,U.; Baier,H.: Advanced inspection techniques for life-cycle monitoring of aerospace structures. Proceedings International Symposium on NDT in Aerospace 2008,, 2008 mehr…
  • Petermann, Markus; Meiwald, Thomas: Contra Imitatio (ConImit) - Innovationsplattform für präventiven Schutz vor Produktpiraterie. CiDaD News 2, 2008, 11-12 mehr…
  • Petermann, Markus; Meiwald, Thomas; Lindemann, Udo: Factors Influencing the Vulnerability of Manufacturers to Product Imitations. 10th International Design Conference DESIGN 2008, The Design Society, 200819.-22.05.2008 mehr…
  • Ponn, J.; Lindemann, U.: Konzeptentwicklung und Gestaltung technischer Produkte. Springer, 2008 mehr…
  • Rapp,S.; Lang,M.; Letschnik,J.; Nathrath,N.; Trümper,M.; Fasold,D.; Walter,U.; Baier,H.; Krämer,L.: CFK Struktur einer leichten Intersatelliten Antenne (LISA). Proc. der DGLR Tagung, 2008 mehr…
  • Rapp,S.; Reutlinger,A.; Zuknik,K.H.; Baier,H.;: An integrated temperature sensor network for satellite sandwich panels. Proceedings of the IAC Congress 2008, 2008 mehr…
  • Rapp,S.; Zuknik,K.; Reutlinger,A.; Baier,H.: A demonstrator for an integrated temperature sensor network for satellite panels. 4th European Workshop on Structural health Monitoring, 2008 mehr…
  • Roelofsen, Julia; Fuchs, S.; Fuchs, D.; Lindemann, Udo: Enabling an Internal Process Benchmark Using PDM-data. 9th Biennial ASME Conference on Engineering Systems Design and Analysis ESDA08, 20087-9.07.2008 mehr…
  • Shea, K.; Engelhard, M.; Helms, B; Merz, M.: Teaching An Integrated New Product Development Seminar On Cognitive Products. 10th International Design Conference DESIGN 2008, The Design Society, 2008May 19 - 22, 2009 mehr…
  • Shea, Kristina; Engelhard, Marco; Ertelt, Christoph; Hoisl, Frank: A Framework for a Cognitive Design-to-Fabrication System. 7th International Symposium on Tools and Methods of Competitive Engineering (TMCE 2008), 200821. – 25. April 2008, 1185-1200 mehr…
  • Stowe, Harold; Browning, Tyson; Maurer, Maik: Integrated Dynamic Planning (IDP). 10th International DSM Conference, Hanser, 200811-12.11.2008 mehr…
  • Treiber,J.; Mueller,U.; Han,J.-H.; Baier,H.: Filtering techniques in the dynamic deformation estimation using multiple strains measured by FBGs. International Symposium Smart Structures/NDE, 2008Vol. 6932 of Proc. of SPIE, pages 69322A1-69322A9 mehr…
  • Wagner, C.; Graebsch, Martin; Seering, W.; Lindemann, Udo: Specification Risk Analysis: Introducing a Risk Management Method for Product Architectures. 10th International Design Conference DESIGN 2008, 200819.-22.05.2008 mehr…
  • Wedekind,M.; Baier,H.: Mechanical Modelling of Wire Reinforced Metal Matrix Extrusion. Advanced Materials Research, Vol. 43 (Vol.43), 2008, pp 145-156 mehr…
  • Zaeh, M. F.; Beetz, M.; Shea, Kristina; Reinhart, G.; Stursberg, O.; Ostgathe, M.; Lau, C.; Ertelt, C.; Pangercic, D.; Ruehr, T.; Ding, H.; Paschedag, T.: An Integrated Approach to Realize the Cognitive Machine Shop. 1st International Workshop on Cognition for Technical Systems, 200806.-07.10.2008 mehr…
  • Zaeh, M. F.; Beetz, Michael; Shea, Kristina; Reinhart, G.; Bender, K.; Ostgathe, Martin; Vogl, Wolfgang; Wiesbeck, M.; Engelhard, Marco; Ertelt, Christoph; Friedrich, M.; Ruehr, Thomas; Lau, Christian: The Cognitive Factory. In: ElMaraghy, Hoda (Hrsg.): Changeable and reconfigurable manufacturing systems. Springer, 2008 mehr…

2007

  • Lindemann, U.; Danilovic, M.; Deubzer, F.; Maurer, M.; Kreimeyer, M. (Hrsg.): Proceedings of 9th International DSM Conference. Shaker, 2007 mehr…
  • Antonelli, V.; Terzi, A.; Labordus, M.: Structural design of the superbus. XVI. International Conference on Composite Materials, 2007 mehr…
  • Antonelli, V.; Terzi, A.; Labordus, M.; Basien, MJ.: Design an production of the superbus. M&P-Coast to coast and around the world. SAMPE International, 2007 mehr…
  • Antonelli, V.; Terzi, A.; Ockels, WJ; Beukers, A.: Preliminary design of the superbus. SAMPE Europe 28th International Conference, 2007 mehr…
  • Baier,H.: Funktionalisierte Leichtbau-Sandwiches and Strukturmembrane. Leichtbau-Forum EuroLite, 2007 mehr…
  • Baier,H.; Datashvili,L.; Rapp,S.: Smart membranes for aerospace applications. Int. Conf. on Smart Materials and Nanotechnology in Engineering (SMN07), 2007 mehr…
  • Baier,H.; Datashvili,L.; Rapp,S.: Functional membranes - a basis for satellite architectures of the future. European Conference on Aerospace Science (CEAS), 2007 mehr…
  • Baier,H.; Döngi,F.; Müller,U.: Simulation of Adaptronic Systems. In: H. Janocha (ed.) (Hrsg.): Adaptronics and Smart Structures. Springer Verl. (2nd ed. Aufl.), 2007, pp. 75-94 mehr…
  • Baier,H.; Rapp,S.: In-orbit monitoring and readjustment of satellite structures. European Conference on Aerospace Science (CEAS), 2007 mehr…
  • Baumberger, C.; Blessing, I.; Lindemann, Udo: Entwicklung und Herstellung von individualisierten Produkten. In: Krause, Frank-Lothar; Franke, Hans-Joachim; Gausemeier, Jürgen (Hrsg.): Innovationspotenziale in der Produktentwicklung. Hanser, 2007, 107-115 mehr…
  • Baumberger, C.; Grote, K.-H.; Lindemann, Udo; Sohn, D.: Rapid Prototyping. In: Krause, Frank-Lothar; Franke, Hans-Joachim; Gausemeier, Jürgen (Hrsg.): Innovationspotenziale in der Produktentwicklung. Hanser, 2007, 177-182 mehr…
  • Baumberger, Georg Christoph: Methoden zur kundenspezifischen Produktdefinition bei individualisierten Produkten. Dissertation, 2007 mehr…
  • Bolognini, F.; Seshia, A.A.; Shea, K.: A computational design method for MEMS using COMSOL. European COMSOL Conference 2007, 200723.-24.10.2007 mehr…
  • Bolognini, F.; Seshia, Ashwin A.; Shea, Kristina: Exploring the Use Of Multi-Domain Computational Synthesis in MEMS Design: An Algorithmic Simulation-Based Method. 16th International Conference on Engineering Design ICED'07, 200728.-30.08.2007 mehr…
  • Braun, S. C.; Hellenbrand, D.; Lindemann, U.: Kostentransparenz in der Mechatronik. Shaker Online, 2007 mehr…
  • Braun, Stefanie C: Kostenfrüherkennung mechatronischer Produkte. CiDad News 1, 2007, 10 mehr…
  • Braun, Stefanie C.; Diehl, Holger; Petermann, Markus; Hellenbrand, David; Lindemann, Udo: Function Driven Process Design for the Development of Mechatronic Systems. 9th International DSM Conference, 200711.-12.11.2007 mehr…
  • Braun, Stefanie C.; Lindemann, Udo: A Multilayer Approach for Early Cost Estimation of Mechatronical Products. 16th International Conference on Engineering Design ICED'07, 200728.-30.08.2007 mehr…
  • Braun, Stefanie C.; Lindemann, Udo: Multiplanare Vernetzungen – Abhängigkeiten zwischen Produktkonzept, Produkterstellungsprozess und Ressourcenverbrauch in der Mechatronik. 5. Paderborner Workshop - Entwurf mechatronischer Systeme, 200722-23.03.2007 mehr…
  • Braun, Stefanie; Lindemann, Udo: Kostenfrüherkennung mechatronischer Produkte mittels Analyse multiplanarer Vernetzungen. VDI Mechatronik 2007 - Innovative Produktentwicklung, 200723.-24.05.2007 mehr…
  • C. Zauner, H. Baier, M. Reindl,: Shock and elastic waves in space structures: simulation, attenuation and usage for monitoring. European Conference on Aerospace Science (CEAS), 2007 mehr…
  • Datashvili,L.; Baier,H.; Schimitschek,J.; Lang,M.; Huber,M.: High Precision Large Deployable Space Reflector Based on Pillow-Effect-Free Technology. 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2007 mehr…
  • Deubzer, F.; Kreimeyer, Matthias; Herfeld, U.; Lindemann, Udo.: A Strategy for Efficient Collaboration in Virtual Product Development Environments. 16th International Conference on Engineering Design ICED'07, 200728.-30.08.2007 mehr…
  • Dick, Birgit; Ponn, Josef: PLM-Methodenhandbuch – systematische Unterstützung für den gesamten Produktlebenszyklus. CiDad News 2, 2007, 3 mehr…
  • Diehl, Holger; Lindemann, Udo: 3D-Skizzieren mit Hilfe von Augmented Reality. Forum 3D, 3D-Technologien an der Technischen Universität München, 2007 mehr…
  • Diehl, Holger; Lindemann, Udo: Integration eines 3D-Skizziertools in den Produktentwicklungsprozess. 6. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung, 2007 mehr…
  • Dorn, Claudia S.; Krüger, Jens; Müller, Achim: Schlechte Kommunikation führt zu Verschwendung. CADplus Business and Engineering 2, 2007, 57-58 mehr…
  • Eckert, C. M.; Jowers, I.; Clarkson, P. J.: Knowledge requirements over long product lifecycles. 16th International Conference on Engineering Design, 200728.-31.08.2011 mehr…
  • Ehrlenspiel, Klaus; Kiewert, Alfons; Lindemann, U.: Kostengünstig Entwickeln und Konstruieren - Kostenmanagement bei der integrierten Produktentwicklung. Springer (6., überarb. u. korr. Aufl.. Aufl.), 2007 mehr…
  • Ehrlenspiel, Klaus; Kiewert, Alfons; Lindemann, Udo: Cost Efficient Design. ASME Press. Springer, 2007 mehr…
  • Felgen, Luc: Systemorientierte Qualitätssicherung für mechatronische Produkte. Dissertation, 2007 mehr…
  • Forzi, T.; Peters, M.; Diehl, H.: Wissensmodell für das Wissensmanagement in Netzwerken. In: Schuh, Günther; Schlick, Christopher; Lindemann, Udo (Hrsg.): Integriertes Wissensmanagement in Netzwerken. VDI, 2007 mehr…
  • Frank, Tobias; Herfeld, Ulrich; Kreimeyer, Matthias; Lindemann, Udo: Parametrische Optimierung im CAD-CAE-Prozess der Karosserieentwicklung. ANSYS Conference & 25th CADFEM Users’ Meeting 2007, CADFEM, 200721.-23.11.2007 mehr…
  • Franke, Hans J.; Baumberger, C.; Grotkamp, S.; Lindemann, Udo; Maurer, M.; Straube, D.: Komplexitätsmanagement. In: Krause, Frank-Lothar; Franke, Hans-Joachim; Gausemeier, Jürgen (Hrsg.): Innovationspotenziale in der Produktentwicklung. Hanser, 2007, 3-33 mehr…
  • Gorbea, Carlos; Fricke, Ernst; Lindemann, Udo: Pre-Selection of Hybrid Electric Vehicle Architectures During the Initial Design Phases. 9th International DSM Conference, 200716.-18.10.2007 mehr…
  • Graebsch, Martin: Lean Development in Deutschland:Ergebnisworkshop rundet die erfolgreiche Studie ab. CiDaD News 1, 2007 mehr…
  • Graebsch, Martin; Lindemann, Udo; Weiß, Stefan: Lean Development. Dr. Hut, 2007 mehr…
  • Graebsch, Martin; Seering, Warren; Lindemann, Udo: Assessing Information Waste in Lean Product Development. 16th International Conference on Engineering Design ICED'07, 200728.-31.08.2007 mehr…
  • Grieb, Jöran: Auswahl von Werkzeugen und Methoden für verteilte Produktentwicklungsprozesse. Dissertation, 2007 mehr…
  • Grieb, Jöran; Kreimeyer, Matthias; Lindemann, Udo: Methodical Support of Multidisciplinary Globally Distributed Design Projects. ProSTEP iViP Science Days 2007, 200725.-26.09.2007 mehr…
  • Gundlach, Carsten; Lindemann, Udo; Ried, Horst: Proceedings of the TRIZ-future conference 2007. Kassel University Press GmbH, 2007 mehr…
  • Hepperle, Clemens; Maier, Anja M.; Kreimeyer, Matthias; Lindemann, Udo; Clarkson, John P.: Analyzing Communication Dependencies in Product Development Using the Design Structure Matrix. 9th International DSM Conference, 200716.-18.10.2007 mehr…
  • Hepperle, Clemens; Mörtl, Markus; Lindemann, Udo: BIONIK - Mit Methode zu technischen Lösungen durch Inspiration aus der Natur. Innovationsquelle Natur - Innovationsquelle Bionik, 200718.10.2007 mehr…
  • Herfeld, Ulrich: Matrix-basierte Verknüpfung von Komponenten und Funktionen zur Integration von Konstruktion und numerischer Simulation. Dissertation, 2007 mehr…
  • Hornung,C.; Pflanz,G.; Baier,H.: Active vibration control study for convertible vehicles based on disturbance analysis. Proc. Adaptronic Congress, 2007 mehr…
  • Hornung,C.; Pflanz,G.; Baier,H.: Störgrößenuntersuchung am Cabrioletfahrzeug für die gezielte Auslegung von Regelungsstrategien zur aktiven Schwingungsreduzierung. Proceedings Adaptronic Congress, 2007 mehr…
  • Huber,M.; Petersson,Ö.; Baier,H.: Completeness of Problem Formulation via Knowledge-based Models. EUROMECH Colloquium 482 - Efficient Method for Robust Design and Optimization, 2007 mehr…
  • Keijzer, W.; Kreimeyer, M.; Schack, R.; Lindemann, U.; Zäh, M.: Vernetzungsstrukturen in der Digitalen Fabrik. Dr.-Hut, 2007 mehr…
  • Keijzer, Willem: Wandlungsfähigkeit von Entwicklungsnetzwerken – Ein Modell am Beispiel der Automobilindustrie. Dissertation, 2007 mehr…
  • Kleiner,M.; Baier,H.; Fleischer,J.; Löhe,D.; Weinert,K.; Zäh,M.; Schikorra,M.: Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen – Ergebnisbericht der Phase I, 1.1.2003 - 31.12.2006. VDI Verl., 2007 mehr…
  • Koussios, S.; Beukers, A.; Bergsma, OK; Bersee, Hen; Antonelli, V.: Continuous fibre reinforced composites: Integral design for filament winding. Aachen-Dresden International Textile Conference, 2007 mehr…
  • Kreimeyer, Matthias; Deubzer, F.; Danilovic, M.; Fuchs, S. D.; Herfeld, U.; Lindemann, Udo: Team composition to enhance collaboration between embodiment design and simulation departments. 16th International Conference on Engineering Design ICED'07, 200728.-30.08.2007 mehr…
  • Kreimeyer, Matthias; Diehl, Holger: Langfristige, strategische Produktplanung für Investitionsgüter. CiDaD News 2, 2007, 7 mehr…
  • Kreimeyer, Matthias; Eichinger, Markus; Lindemann, Udo: Aligning multiple domains of design processes. 16th International Conference on Engineering Design ICED'07, 200728.-30.08.2007 mehr…
  • Kreimeyer, Matthias; Eichinger, Markus; Lindemann, Udo: Assessment of Process Networks using Graph and Network Theory Based Key Figures. 4th Future Business Technology Conference, Eurosis-ETI, 200725.-27.04.2007 mehr…
  • Kreimeyer, Matthias; Keijzer, Willem; Lindemann, Udo: Methodisches Handeln bei Krisen in der Produktentwicklung. Konstruktion 9, 2007, 104-106 mehr…
  • Kuhn,T.; Rößler,C.; Baier,H.: Multidisciplinary Design Methods for the Hybrid Universal Ground Observing (HUGO) Airship. 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO), 2nd Centre of Excellence for Integrated Aircraft Technologies (CEIAT), International Conference on Innovation and Integration in Aerospace Sciences and 17th Lighter-Than-Air Systems Technology Conference (LTA), 2007 mehr…
  • Lauer, Wolfgang; Nißl, Alexandra; Braedt, Henrik; Lindemann, Udo: Tug Together - Supportive Tool for Distributed Design Teams. 16th International Conference on Engineering Design ICED'07, 200728.-31.08.2007 mehr…
  • Lauer, Wolfgang; Ponn, Josef; Lindemann, Udo: Purposeful Integration of Product Models into the Product Development Process. 16th International Conference on Engineering Design ICED'07, 200728.-31.08.2007 mehr…
  • Lindemann, Udo; Lauer, Wolfgang: Prozessorientierte Strukturierung von Produktmodellen in Produktentwicklungsprozessen. Berliner Kreis Newsletter 2, 2007, 1 mehr…
  • Lindemann, Udo; Maurer, Maik: Facing Multi-Domain Complexity in Product Development. The Future of Product Development – Proceedings of the 17th CIRP Design Conference, Springer, 2007 mehr…
  • Lindemann, Udo; Petermann, Markus; Meiwald, Thomas: Qualifizierte Auswahl von Maßnahmen gegen Produktpiraterie. Berliner Kreis Newsletter 1 (8), 2007 mehr…
  • Maier, Anja; Hepperle, Clemens; Kreimeyer, Matthias; Eckert, Claudia; Lindemann, Udo; Clarkson, John: Associations Between Factors Influencing Engineering Design Communication. 16th International Conference on Engineering Design ICED'07, 200728.-31.08.2007 mehr…
  • Malherbe, Laurent; Herfeld, Ulrich; Kreimeyer, Matthias; Deubzer, Frank; Deneux, Dominique: De la mise en relation des structures produit et fonctionnelle dans le développement automobile pour gerer les flux informationelles. 10eme Colloge National AIP-PRIMECA: Les Innovations en Conception des Produits et des Systèmes de Production, AIP-Primeca, 200718.-20.04.2007 mehr…
  • Maurer, Maik: Structural Awareness in Complex Product Design. Dissertation, 2007 mehr…
  • Maurer, Maik; Kesper, Heiner; Lindemann, Udo: Optimization of a system’s overall structural criticality using evolutionary algorithms. International Conference on Industrial Engineering and Systems Mangement (IESM 2007), Tsinghua University Press, 200730.05.-02.06.2007 mehr…
  • Maurer, Maik; Lindemann, Udo: Facing Multi-domain Complexity in Product Development. CiDaD Working Paper Series 3, 2007, 1-12 mehr…
  • Maurer, Maik; Lindemann, Udo: Structural awareness in complex product design – The Multiple-Domain Matrix. 9th International DSM Conference, Shaker, 200716.-18.10.2007 mehr…
  • Meiwald, T.; Pecquet, N.: Maschinenbau macht sich schlau. KontakTUM 1, 2007, 3 mehr…
  • Meiwald, T.; Petermann, Markus: Keine Chance für Plagiate - Technische Maßnahmen gegen Produktpiraterie. Intelligenter Produzieren 6, 2007, 24-25 mehr…
  • Mörtl, M.: Heute schon kreativ gewesen? Einfache Methoden für neue Ideen und Übungsbeispiele. Innovationsmanagement - Von der Idee zur praktischen Umsetzung., Haus der Technik e.V., 2007Ismaning, 27.03.2007-28.03.2007 mehr…
  • Mörtl, Markus: Heute schon kreativ gewesen? Einfache Methoden für neue Ideen und Übungsbeispiele. Innovationsmanagement - Von der Idee zur praktischen Umsetzung, Haus der Technik e.V., 200727.-28.03.2007 mehr…
  • Pecquet, N.; Kirschner, R.: "Implicit knowledge in product innovation" - Projektüberblick. CiDaD News 2, 2007, 6 mehr…
  • Pecquet, N.; Kirschner, R.; Lindemann, Udo: Wirkung und Bedeutung von Kommunikation im Innovationsprozess. Design for X, Beiträge zum 18. Symposium, Lehrstuhl für Konstruktionstechnik, 200711.-12.10.2007 mehr…
  • Petermann, Markus; Meiwald, Thomas: Produktpiraterie aktiv verhindern: Gestaltungsmöglichkeiten bei Produkt und Entwicklungsprozess. CiDaD News 02, 2007, 5 mehr…
  • Petermann, Markus; Trevelyan, James; Felgen, Luc; Lindemann, Udo: Cross Cultural Collaboration in Design Engineering – Influence Factors and their impact on work performance. 16th International Conference on Engineering Design, 200728.-30.08.2007 mehr…
  • Ponn, Josef: Situative Unterstützung der methodischen Konzeptentwicklung technischer Produkte. Dissertation, 2007 mehr…
  • Ponn, Josef; Kreimeyer, Matthias; Lindemann, Udo: Methodical Evaluation of Single and Group Projects. 9th International Conference on Engineering and Product Design Education (E&PDE), Hadleys, 200713.-14.09.2007 mehr…
  • Rapp,S.: Deformation field estimation using fiber bragg gratings. European Conference on Aerospace Science (CEAS), 2007 mehr…
  • Rapp,S.; Kang,L.; Mueller,U.; Han,J.; Baier,H.: Dynamic shape estimation by modal approach using fiber Bragg grating strain sensors. Smart Structures and Materials 2007 - Sensors and Smart Structures Technologies, 2007 mehr…
  • Renner, Ingo: Methodische Unterstützung funktionsorientierter Baukastenentwicklung am Beispiel Automobil. Dissertation, 2007 mehr…
  • Roelofsen, Julia; Baumberger, Christoph; Lindemann, Udo: An approach towards situation-specific planning of design processes. 16th International Conference on Engineering Design ICED'07, Dr. Hut, 200728.-30.08.2007 mehr…
  • Roelofsen, Julia; Lauer, Wolfgang; Lindemann, Udo: Product Model Driven Development. 14th European Concurrent Engineering Conference, 200725.-27.04.07 mehr…
  • Roose,S.; Stockman,Y.; Rochus,P.; Kuhn,T.; Baier,H.; Casarosa,G.; Langlois,S.: Optical methods for non-contact measurements of membrane space structures. Proc. 10th European Conference on Spacecraft Structures, Materials & Mechanical Testing and 1st CEAS European Air and Space Conference, 2007 mehr…
  • Roose,S.; Stockmann,Y.; Rochus,P.; Kuhn,T.; Baier,H.; Casarosa,G.; Langlois,S.: Optical methods for non contact measurements of membranes. International Astronautical Congress (IAC-07-C2.2.1), 2007 mehr…
  • Schimitschek,J.; Datashvili,L.; Kuhn,T.; Baier,H.: Charakterisierung, Modellierung und Funktionalisierung von Membranstrukturen. DGLR Workshop X, Luftfahrzeuge leichter als Luft, Leichtbau im Rahmen der leichter-als-Luft-Technologie, 2007 mehr…
  • Schneider, S.: Model for the evaluation of engineering design methods. Dissertation, 2007 mehr…
  • Schuh, Günther; Schlick, Christopher; Lindemann, Udo: Integriertes Wissensmanagement in Netzwerken. In: Schuh, Günther; Schlick, Christopher; Lindemann, Udo (Hrsg.): VDI, 2007 mehr…
  • Schuster, Ilona; Dick, Birgit; Schaub, Petra-Badke; Lindemann, Udo: Evaluation of a methodological training in design education. 16th International Conference on Engineering Design ICED'07, 200728.-30.08.2007 mehr…
  • Shea, Kristina: Design Automation Tools for Early Phase Engineering. ProSTEP iViP Science Days 2007, 200725.-26.09.2007 mehr…
  • T. Kuhn, C. Rößler, H. Baier,: Multidisziplinäre Optimierung am 'Hybrid Universal Ground Observing Airship' (HUGO). DGLR Workshop X, Luftfahrzeuge leichter als Luft, Leichtbau im Rahmen der leichter-als-Luft-Technologie, 2007 mehr…
  • Terzi, A.; Antonelli, V.; Ockels, WJ.: A surprising news. Composite Magazine, 2007 mehr…
  • Wildemann, Horst; Ann, Christoph; Broy, Manfred; Günthner, Willibald A.; Lindemann, Udo: Plagiatschutz - Handlungsspielräume der produzierenden Industrie gegen Produktpiraterie. Forschungsbericht. TCW Transfer-Centrum, 2007 mehr…
  • Wildschek,A.; Maier,R.; Baier,H.: Wild tunnel testing of an adaptive control system for vibration suppression on aircraft. Proc. AIAA Conf. of Guidance, Navigation and Control, 2007 mehr…
  • Wildschek,A.; Maier,R.; Baier,H.: Argumentation of active wing-bending control with a supplementary adaptive feed-forward control algorithm. Proceedings of 2nd Europ. Conference of Aerospace Science (EUCASS), 2007 mehr…
  • Zäh, M.; Ostgathe, M.; Friedrich, M.; Hoisl, Frank: Kognitive Produktionssysteme – auf dem Weg zur intelligenten Fabrik der Zukunft. ZWF (9), 2007, 525-530 mehr…

2006

  • Lindemann, U.; Reichwald, R.; Zäh, M. F. (Hrsg.): Individualisierte Produkte - Komplexität beherrschen in Entwicklung und Produktion. Springer, 2006 mehr…
  • Antonelli, V.; Marissen, R.; Bersee, Hen; Beukers, A.: The effect of the thermal expansion of the rubber mould on the pressure forming of thermoplastis. SAMPE Europe International Conference, 2006 mehr…
  • Baier,H.; Datashvili,L.; Natrath,N.: The deployable precision shell-membrane reflector SMART. Proc. Euro. Conf. on Antennas and Propagation, Eucap 2006, 2006 mehr…
  • Baier,H.; Datashvili,L.; Schimitschek,J.: Faserverbundbauteile mit weichen Matrixwerkstoffen. Workshop Composite Materials, 2006 mehr…
  • Baier,H.; Huber,M.; Langer,H.: Design Optimization for hybrid material structures. Int. Journal for Structural and Multidisciplinary Optimization, 2006 mehr…
  • Baier,H.; Müller,U.: Simulation of Adaptronic Structures. Automatisierungtechnik 6, 2006, 270-276 mehr…
  • Baier,H.; Seesselberg,C.; Specht,B.: Optimierung in der Strukturmechanik. LLS Verlag, 2006 mehr…
  • Baumberger, C.; Braun, B.; Lindemann, U.; Maurer, M.: Strategic diversification by network portfolio analysis. 9th International Design Conference DESIGN 2006, Institution of Engineering Designers, 200615.-18.05.2006, 177-184. mehr…
  • Baumberger, C.; Lindemann, U.: Requirement oriented process planning and configuration. NordDesign 2006, Faculty of Engineering, University of Iceland, 200616.-18.08.2006, 244-254 mehr…
  • Berger, Ulrich Eugen: Bauteilüberwachung durch Analyse von Schwingungen und Festkörperwellen. Dissertation, 2006 mehr…
  • Braun, S.; Gero, J.: Self-training System that learns through Experimentation. 9th International Design Conference DESIGN 2006, Institution of Engineering Designers, 200615.-18.05.2006, 193-198 mehr…
  • Datashvili,L.; Baier,H.: Membranes and Thin Shells for Space Reflectors. 10th ASCE Aerospace Division International Conference on Engineering, Construction and Operations in Challenging Environments, 2006 mehr…
  • Datashvili,L.; Baier,H.; Encinar,J.; Legay,H: Mechanical Investigation of a Multi-Layer Reflectarray for Ku-Band Space Antennas. Journal of Aerospace Science and Technology (AST) 10, 2006, 618-627 mehr…
  • Datashvili,L.; Lang,M.; Huber,M.; Baier,H.: Accuracy study of a space deployable antenna reflecting surface under 0G and 1G conditions. In: DGLR Jahrbuch Bd. III 2006. DGLR, 2006 mehr…
  • Deubzer, F.; Kreimeyer, M.; Danilovic, M.: Design of Integrated Teams in Automotive Industry – A DMM Application. 8th International Design Structure Matrix Conference, The Boeing Company, 2006 mehr…
  • Deubzer, F.; Kreimeyer, M.; Petermann, M.; Lindemann, U.: Analyse und Modellierung komplexer Systeme und Prozesse unter kognitiven Randbedingungen. Cognitive Systems Engineering in der Fahrzeug- und Prozessführung, DGLR, 200624.-25.10.2006, 257-266 mehr…
  • Deubzer, Frank; Kreimeyer, Matthias; Lindemann, Udo: Exploring Strategies in Change Management - Current Status and Activity Benchmark. 9th International Design Conference DESIGN 2006, Institution of Engineering Designers, 200615.-18.05.2006, 815-822 mehr…
  • Dick, B.; Lindemann, U.: Adaptation of Methods to Crises Situations in Product Development. Norddesign, Faculty of Engineering, University of Iceland, 200616.-18.08.2006, 56-83 mehr…
  • Eichinger, M.; Maurer, M.; Lindemann, U.: Using Multiple Design Structure Matrices. 9th International Design Conference DESIGN 2006, Institution of Engineering Designers, 200615.-18.05.2006, 229-236 mehr…
  • Encinar,J.; Datashvili,L.; Zornoza,J.; Arrebola,M.; Sierra-Castaner,M.; Besada,J.; Baier,H.; Legay,H.: Dual-Polarization Dual-Coverage Reflectarray for Space Applications. Journal IEEE Transactions on Antennas and Propagation Vol. 54, No. 10, Oct., 2006, 2827-2837 mehr…
  • Erdell, Elmar: Methodenanwendung in der Hochbauplanung – Ergebnisse einer Schwachstellenanalyse. Dissertation, 2006 mehr…
  • Felgen, L.: Energiemanagement im Kraftfahrzeug - Systemdenken als Basis für Effizienz? , Dr. Hut, 200624.11.2006 mehr…
  • Felgen, L.; Gahr, A.; Lindemann, U.:: Monitoring Tool for a Customer Orientated Quality Management. 9th International Design Conference DESIGN 2006, The Design Society, 200615.-18.05.2006 mehr…
  • Gahr, Andreas Helmut: Pfadkostenrechnung individualisierter Produkte – eine flexible entwicklungsbegleitende Kalkulation. Dissertation, 2006 mehr…
  • Grieb, J.; Lindemann, U.:: Communication Media in Distributed Collaboration – Analysis in Design Experiments. 9th International Design Conference DESIGN 2006, The Design Society, 200615.-18.05.2006, 541-548 mehr…
  • Grohmann,B.; Baier,H.: Design, Modelling and Testing of Adaptive structures for active trailing edges of helicopter rotors. Proc. De MEASS Conf 2006, 2006 mehr…
  • Grohmann,B.; Maucher,C.; Baier,H.: Multidisciplinary design and optimization of active trailing edge for smart helicopter rotor blade. Proc. Int. Symp. on Design, Modelling and Exp. of Adaptive Structures, 2006 mehr…
  • Hegemann,J.; Baier,H.: Simulation of propagating ultrasonic waves in composites. Proc. Europ. NDT Conference (ECNDT), 2006 mehr…
  • Hegemann,J.; Baier,H.; Pfeiffer,A.: Modelling and simulation of ultrasonic wave propagation in complex composite materials. Proc. Conf. on Damage in Composite Materials (CDCM), 2006 mehr…
  • Herfeld, U.; Kreimeyer, M.; Deubzer, F.; Frank, T.; Lindemann, U.; Knaust, U.: Verknüpfung von Komponenten und Funktionen zur Integration von Konstruktion und Simulation in der Karosserieentwicklung. Berechnung und Simulation im Fahrzeugbau, VDI Verlag GmbH, 200627. - 28. 9. 2006, 259-276 mehr…
  • Heßling, Thomas: Einführung der Integrierten Produktpolitik in kleinen und mittelständischen Unternehmen. Dissertation, 2006 mehr…
  • Huber,M.; Baier,H.: Qualitative Knowledge and Manufacturing Considerations in Multidisciplinary Structural Optimization of Hybrid Material Structures. Advanced Materials Reserach: Flexible Manufacture of Lightweight Frame Structures 10, 2006, 143-152 mehr…
  • Jung, Christoph: Anforderungsklärung in interdisziplinärer Entwicklungsumgebung. Dissertation, 2006 mehr…
  • Keijzer, W.; Kreimeyer, Matthias; Schack, R.; Lindemann, Udo; Zäh, R.: Isolierung versus Vernetzung - wie arbeitet die Branche zusammen? 3rd Internationaler Fachkongress Digitale Fabrik in der Automobilindustrie, mic-management information center GmbH, 200623.-24.05.2006 mehr…
  • Keijzer, W.; Schack, R.; Kreimeyer, M.: Immer noch zu IT-lastig. Automobil-Produktion May, 2006, 64-65 mehr…
  • Kiefmann, Andreas; Krinninger, Maximilian; Lindemann, Udo; Senner, Veit; Spitzenpfeil, Peter: A new Six Component Dynamometer for Measuring Ground Reaction Forces in Alpine Skiing. ISEA 2006, Springer, 200611.-14.07.2006, 87-92 mehr…
  • Kreimeyer, M.: Studie: Effiziente Zusammenarbeit von Konstruktion und Simulation in der Produktentwicklung. CiDaD News (1), 2006, 9-10 mehr…
  • Kreimeyer, M.; Eichinger, M.; Maurer, M.; Deubzer, F.: Misalignment between implicit and real process structures. 8th International Design Structure Matrix Conference, The Boeing Company, 2006 mehr…
  • Kreimeyer, M.; Herfeld, U.; Deubzer, F.; Lindemann, U.: Effiziente Zusammenarbeit von Konstruktions- und Simulationsabteilungen in der Automobilindustrie. CiDaD Working Paper Series 02 (01), 2006 mehr…
  • Kreimeyer, M.; Heymann, M.; Lauer, W.; Lindemann, U.: Die Konstruktionsmethodik im Wandel der Zeit – Ein Überblick zum 100sten Geburtstag von Prof. Wolf Rodenacker. Konstruktion (10), 2006, 72-74 mehr…
  • Kreimeyer, Matthias; Braun, Stefanie; Baumberger, C.; Meiwald, Thomas; Petrovic, K.; Bernitz, M.; Stüber, N.: Product Development Seminars - Key Factors for Successful Product Development in Student Teams. 4th Engineering & Product Design Education International Conference - Educating Designers for a Global Context, Institution of Engineering Designers, 20067.-8.9.2006, 335-340 mehr…
  • Kreimeyer, Matthias; Herfeld, U.; Deubzer, Frank; Dequidt, C.; Lindemann, Udo: Function-driven product design in virtual teams through methodical structuring of requirements and components. 8th Biennial ASME Conference on Engineering Systems Design and Analysis ESDA2006, ASME, 20064.-7.7.2006 mehr…
  • Kreimeyer, Matthias; Neumüller, K.; Lindemann, Udo: A Management Model for the Design Process in Vehicle Safety Development. 9th International Design Conference DESIGN 2006, Institution of Engineering Designers, 200615.-18.05.2006, 1525-1532 mehr…
  • Kuhn,T.; Berger,U.; Lang,M.; Baier,H.: Verbundprojekt: MOSL - Konzeptionelle Bauweisenuntersuchungen für Luftschiffstrukturen – Schlussbericht zum BMWF Förderkennzeichen 20W0305B. eutsches Zentrum f ̈ ur Luft- und Raumfahrt e.V., 2006, mehr…
  • Kuhn,T.; Rößler,C.; Baier,H.: Konzeptstudien zum 'Hybrid Universal Ground Observing Airship' (HUGO-Airship). DGLR Workshop IX - Luftfahrzeuge leichter als Luft; Skalierungsgesetze, 2006 mehr…
  • Lang,M.; Baier,H.; Ernst,T.: Surface accuracy prediction and optimization of a high precision Q/V-Band reflector. 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2006 mehr…
  • Legay,H.; Cailloce,Y.; Scialino,L.; Pellegrino,S.; Datashvili,L.; Cannon,W.; Pranajaya,F.; Beattie,A.; Encinar,J.; Barba,M.; Van´t Klooster,K.;: System Applications and Realisation of Novel Deployable Antenna Concepts. European Conference on Antennas and Propagation, EuCAP, 2006 mehr…
  • Lindemann, U.; Baumberger, C.: Individualisierte Produkte. In: Lindemann, U.; Reichwald, R.; Zäh, M. F. (Hrsg.): Individualisierte Produkte - Komplexität beherrschen in Entwicklung und Produktion. Springer, 2006, 7-16 mehr…
  • Lindemann, U.; Baumberger, C.: Adaptionsprozesse für individualisierte Produkte. In: Lindemann, U.; Reichwald, R.; Zäh, M. F. (Hrsg.): Individualisierte Produkte - Komplexität beherrschen in Entwicklung und Produktion. Springer, 2006, 129-150 mehr…
  • Lindemann, U.; Gaag, A.; Schneider, S.; Wach, J.-J.; Herden, M.-O.; Rasel, T.; Anton, T.: Simulation pneumatischer Systeme als Hilfsmittel der Projektierung von Bremssteuerungen für Schienenfahrzeuge. 8. Internationale Schienenfahrzeugtagung, Eurailpress Tetzlaff-Hestra, 20064.-8. 10. 2006, 94-96 mehr…
  • Lindemann, U.; Gahr, A.: Kostenmanagement individualisierter Produkte. In: Lindemann, U.; Reichwald, R.; Zäh, M. F. (Hrsg.): Individualisierte Produkte - Komplexität beherrschen in Entwicklung und Produktion. Springer, 2006, 179-198 mehr…
  • Lindemann, U.; Maurer, M.: Entwicklung und Strukturplanung individualisierter Produkte. In: Lindemann, U.; Reichwald, R.; Zäh, M. F. (Hrsg.): Individualisierte Produkte - Komplexität beherrschen in Entwicklung und Produktion. Springer, 2006, 41-62 mehr…
  • Lindemann, U.; Maurer, M.; Pulm, U.; Ballestrem, F.; Clarkson, J.: The Subjective Aspects of Design Structure Matrices – Analysis of Comprehension and Application and Means to Overcome Differences. 8th Biennial Conference on Engineering Systems Design and Analysis (ASME-ESDA06), ASME-Books, 20064.-7.7.2006 mehr…
  • Lindemann, U.; Schneider, S.; Wach, J.-J.; Herden, M.-O.; Anton, T.: Optimisation of brake systems by the implementation of pneumatic simulation. 5th International Fluid Power Conference Aachen, Shaker Verlag, 200620.-22.03.2006, 161-170 mehr…
  • Maier, A.; Kreimeyer, Matthias; Herfeld, U.; Deubzer, Frank; Lindemann, Udo; Clarkson, P. J.: Reflecting Communication: A Key Factor for Successful Collaboration between Embodiment Design and Simulation. 9th International Design Conference DESIGN 2006, Institution of Engineering Designers, 200615.-18.05.2006, 1483-1490 mehr…
  • Maurer, M.; Pulm, U.; Eichinger, M.; Lindemann, U.: Extending Design Structure Matrices and Domain Mapping Matrices by Multiple Design Structure Matrices. 8th Biennial Conference on Engineering Systems Design and Analysis (ASME-ESDA06), ASME-Books, 20064.-7.7.2006 mehr…
  • Meiwald, T.; Unser, R.; Rackensperger, D.; Clausen, T.; Labermeyer, M.; Lindmeann: Crossover Design: Lessons Learned From An Interdisciplinary Team Contest. International Design Research Symposium., The Korean Society of Mechanical Engineers, 200610.-11.11.2007, 130-136 mehr…
  • Müller, Franz Daniel: Intuitive digitale Geometriemodellierung in frühen Entwicklungsphasen. Dissertation, 2006 mehr…
  • Müller,U.; Zeh,T.; Baier,H.: Vibration and deformation control in opto-mechanical systems by distributed fibre optic Bragg Grating sensors. 8th Int. Conf. on Motion and Vibration Control (Movic), 2006 mehr…
  • Müller,U.; Zeh,T.; Koch,A.; Baier,H.: "iber Optic Bragg Grating Sensors for High-Precision Structural Deformation Control in Optical Systems", Smart Structures and Materials 2006: Smart Sensor Monitoring Systems and Application. Proceedings of SPIE / Smart Structures and Materials 2006: Smart Sensor Monitoring Systems and Application, 2006, pp. 64-75 mehr…
  • Neff,T.; Dietrach,B.; Baier,H.; Datashvili,L.: The MAPSAR mission: objective and status, Proc. of Conf. on Emerging and Future Technologies for Space-Based Operations Support. Nato Research and Tech. Organisation, 2006 mehr…
  • Nißl, Alexandra Maria: Modell zur Integration der Zielkostenverfolgung in den Produktentwicklungsprozess. Dissertation, 2006 mehr…
  • Oehmen, J.; Dick, B.; Lindemann, U.; Seering, W.:: Risk Management in Product Development - Current Methods. 9th International Design Conference DESIGN 2006, Institution of Engineering Designers, 200615.-18.05.2006, 1551-1558 mehr…
  • Pecquet, N.: Reflexion impliziter Anteile bei der Konzeptbewertung in frühen Phasen des Innovationsprozesses. 17. Symposium Design for X, Friedrich-Alexander-Universität Erlangen-Nürnberg, Lehrstuhl für Konstruktionstechnik, 200612.-13.10.2006, 105-114 mehr…
  • Ponn, J.; Deubzer, F.; Lindemann, U.: Intelligent Search for Product Development Information - an Ontology-based Approach. 9th International Design Conference DESIGN 2006, The Design Society, 200615.-18.05.2006, 1203-1210 mehr…
  • Ponn, J.; Lindemann, U.: Systematisches Vorgehen und gezielter Methodeneinsatz unter Berücksichtigung der Entwicklungssituation. 17. Symposium Design for X, Friedrich-Alexander-Universität Erlangen-Nürnberg, Lehrstuhl für Konstruktionstechnik, 200612.-13.10.2006, 69-80 mehr…
  • Ponn, J.; Lindemann, U.: Method Knowledge Transfer in Product Development via Stories from Student Design Projects. International Design Research Symposium., The Korean Society of Mechanical Engineers, 200610.-11.11.2006, 222-232 mehr…
  • Ponn, J.; Lindemann, U.: An Approach towards Situational Design Process Planning and Target-Oriented Application of Design Methods. International Design Research Symposium., The Korean Society of Mechanical Engineers, 200610.-11.11.2006, 90-99 mehr…
  • Ponn, J.; Lindemann, U.: What Information can we extract from the Documentation of Student Design Projects? 9th International Design Conference DESIGN 2006, The Design Society, 200615.-18.05.2006, 1211-1220 mehr…
  • Ponn, J.; Lindemann, U.: CiDaD - A Method Portal for Product Development. 9th International Design Conference DESIGN 2006, The Design Society, 200615.-18.05.2006, 1221-1228 mehr…
  • Ponn, J.; Lindemann, U.: How can we extract Experience from Student Design Projects and transfer it to new Projects? 4th Engineering & Product Design Education International Conference - Educating Designers for a Global Context, Institution of Engineering Designers, 200607.-08.09.2006, 409-414 mehr…
  • Prats, M.; Earl, C.; Garner, S.; Jowers, I.: Shape exploration of designs in a style: towards generation of product designs. Artificial Intelligence for Engineering Design, Analysis, and Manufacturing 20 (3), 2006, 201-215 mehr…
  • Pühlhofer,T.; Baier,H.; Krämer,L.; Unruh,T.: Design, Manufacturing and testing of high speed rotating CFRP chopper discs. SAMPE EUROPE International Conference 2006, 2006 mehr…
  • Schneider, S.: Methodenanwendung im Produktentwicklungsalltag. German Chapter of the IEEE Engineering Management Society, Workshop on Innovation Challenge, 200617.11.2006 mehr…
  • Schneider, Sebastian; Anton, T.: Simulating pneumatic brake systems with AMESIM. European AMESIM User Conference, ASME-Books, 200629.-31.03.2006 mehr…
  • Schneider, Sebastian; Erdell, Elmar; Lindemann, Udo: Enhancing buildings with engineering design methods. Norddesign, Faculty of Engineering, University of Iceland,, 200616.-18.08.2006, 343-353 mehr…
  • Schneider, Sebastian; Meissner, Moritz; Lindemann, Udo: A Survey about the Use of Methods in German Industry. Norddesign, Faculty of Engineering, University of Iceland,, 200616.-18.08.2006, 400-407 mehr…
  • Schröder,R.; Puls,J.; Hajnsek,I.; Jochim,F.; Baier,H.; Datashvili,L.; da Silva,M., W. Paradella,: The MAPSAR Mission: Objectives, Design and Status. European Conference on Synthetic Aperture Radar (EUSAR), 2006 mehr…
  • Stricker, Hans Michael: Bionik in der Produktentwicklung unter der Berücksichtigung menschlichen Verhaltens. Dissertation, 2006 mehr…
  • Tan,H.; Lang,M.; Datashvili,L.; Baier,H.: Inflation and deployment simulation of rigidizable beam for large deployable reflectors. International Journal of Computational Methods Vol. 3, No. 2, 2006, 219-228 mehr…
  • Wildschek,A.; Maier,R.; Jeanneau,M.; Baier,H.: Active wing load alleviation with an adaptive feed-forward control algorithm. Proc. AIAA Conf. on Guidance, Naviagation and Control. Conf. 2006, 2006 mehr…

2005

  • Antonelli, V.: The Behaviour of Rubber During Pressure Forming of Thermoplastic Composites. SAMPE Europe Conference, 2005 mehr…
  • Antonelli, V.; Kuilen, J.-W.G van de; Pauw, I.: The Design of a Timber Guardrail for Highways. IWGC3, 2005 mehr…
  • Baier,H.; Datashvili,L.; Helwig,G.: Advancing material composites for new types of antennas. Proc. ESA Antenna Workshop, 2005 mehr…
  • Baier,H.; Datashvili,L.; Müller,U.: Optimisation and experimental characterisation of hybrid material space structures. ESA Conf. on space structures, materials and testing, 2005 mehr…
  • Baier,H.; Huber,M.: Integration von qualitativem Wissen in die Strukturoptimierung am Beispiel komplexer Fertigungsanforderungen. 23. CADFEM User´s Meeting, 2005 mehr…
  • Baier,H.; Huber,M.: Integration of Qualitative Knowledge and Fuzzy Constraints in MDO Problems. EUROGEN 2005, 2005 mehr…
  • Baier,H.; Huber,M.; Raffaelli,L.: Modellbasierte Optimierung und experimentelle Charakterisierung der Thermo- und Kryo-Mechanik werkstoffhybrider Bauteile. 2. Landshuter Leichtbaucolloquium, 2005 mehr…
  • Baier,H.; Huber,M.; Raffaelli,L.: Modellbasierte Optimierung und experimentelle Charakterisierung der Thermo- und Kryo-Mechanik werkstoffhybrider Bauteile. Materialwissenschaft und Werkstofftechnik Vol. 36, No. 6, 2005, S. 248 - 253 mehr…
  • Baier,H.; Huber,M.; Raffaelli,L.: Thermo-Mechanik werkstoffhybrider Bauteile bei tiefen Temperaturen. Landshuter Leichtbaukolloquium, 2005 mehr…
  • Baier,H.; Müller,M.; Zauner,C.: Structure-Control-Optics Interaction in High Precision Telescopes. Structure-Control-Optics Interaction in High Precision Telescopes, 2005 mehr…
  • Baier,H.; Zauner,C.: Structure-Control-Optics Interaction in high precision telescopes. IUTAM Congress on Control of Nonlinear Mechanical Systems, 2005 mehr…
  • Baldock, K; R., Shea; K.: Combining continuum topology optimization and structural design guidelines for bracing system design in multistory steel building frames. Soft Computing in Engineering, The 12th International Workshop of the European Group for Intelligent Computing in Engineering (EG-ICE), 2005 mehr…
  • Baldock, R.; Shea, K.; Eley, D.: Evolving optimized braced steel frameworks for tall buildings using modified pattern search. International Conference on Computing in Civil Engineering, ASCE 2005, 2005 mehr…
  • Baumberger, C.: Methods of requirement specification in the context of product individualization and mass customization. 3rd World Congress on Mass Customization and Personalization 2005, HKUST, 200518.-21.09.2005 mehr…
  • Berger,U.; Baier,H: Ultraschallbasierende Überwachung von Leichtbaustrukturen. GESA-Symposium 2005, 2005 mehr…
  • Berger,U.; Kuhn,T.; Baier,H.: Alternative Strukturbauweisen und deren Zustandsüberwachung bei Luftschiffen. Deutscher Luft- und Raumfahrtkongress 2005, 2005 mehr…
  • Braun, Thomas E.: Methodische Unterstützung der strategischen Produktplanung in einem mittelständisch geprägten Umfeld. Dissertation, 2005 mehr…
  • Das,K.; Kamle,S.; Baier,H.; Lang,M.: Static Shape Control Of Stiffened Laminated Composite Plate Using Piezoelectric Actuators. Proc. of International Conference on Computational & Experimental Engineering and Science (ICCES 05), 2005 mehr…
  • Datashvili,L.; Lang,M.; Baier,H.; Sixt,T.: Membranes for large and Precision deployable Reflectors. Proc. of European Conference on Spacecraft Structures, Materials & Mechanical Testing 2005, 2005 mehr…
  • Datashvili,L.; Nathrath,N.; Lang,M.; Baier,H.; Fasold,D.; Pellegrino,S.; Soykasap,O.; Tan,L.; Kueh,A.; Mangenot,C.; Santiago-Prowald,J.: New Concepts and Reflecting Materials for Space Borne Large Deployable Reflector Antennas. Proc. of 28th ESA Antenna Workshop on Space Antenna Systems and Technologies, 2005 mehr…
  • Deubzer, F.; Herfeld, U.; Kreimeyer, M.; Lindemann, U.: A structured holistic approach for the integration of CAD and CAE environments. ProSTEP iViP Science Days 2005 - Cross Domain Engineering, ProSTEP iViP Association, 200528.-29.09.2005 mehr…
  • Deubzer, F.; Kreimeyer, M.; Junior, T.; Rock, B.: Der Änderungsmanagement Report 2005. CiDaD Working Paper Series Nr.01/05 (01), 2005, 1-12 mehr…
  • Dick, B.: Hannover Messe 2005 - Medizintechnik, komplexe Produktstrukturen und Kostenmanagement. CiDaD Nr.02/05, 2005, 10 mehr…
  • Dick, B.: Festkolloquium zu Ehren von em. Prof. Dr.-Ing. Klaus Ehrlenspiel. CiDaD Nr.02/05, 2005, 1 mehr…
  • Dick, B.; Jokele, B.; Lindemann, U.: Best Practice Principles for the Prevention of Crisis in Product Development. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005, 355-356 mehr…
  • Dick, B.; Nißl, A.; Petermann, M.: Starthilfe für den akademischen Alltag - Tutorensystem Garching in Australien. TUM Mitteilungen Nr.05/05, 2005, 24-25 mehr…
  • Diehl, H.; Abicht, F.; Lindemann, U.: Realisation of a low cost VR-CAD-System using Open Source Software. Virtual Concept 2005 Biarriz, Springer, 200508.-10.11.2005 mehr…
  • Diehl, H.; Forzi, T.; Hutterer, P.; Kremer, A.; Peters, M.; Winkelmann, K.; Wöhe, S.: Pragmatisches Wissensmanagement am Praxisbeipsiel Bauer Maschinen GmbH. In: Schlegel, Thomas; Spath, Dieter (Hrsg.): Entwicklung innovativer Dienstleistungen - Wissen, Kreativität, Lernen. Fraunhofer IRB, 2005, 261-271 mehr…
  • Erdell, E.; Lindemann, U.: Implementation of Methods in Architecture and Civil Engineering. Construction in the 21st Century (CITC-III), National Technical Universtity of Athens (NTUA), 200515.-17.09.2005 mehr…
  • Erdell, E.; Lindemann, U.: Processes and Methods for Sustainable Planning in Architecture and Civil Engineering. The Centre for Sustainable Design 2005, The Centre of Sustainabe Design, 200523.-25.10.2005, 107-112. mehr…
  • Erdell, E.; Lindemann, U.; Schneider, S.: Ecologic Optimisation of a Buliding with Methods. 12th CIRP Seminar on Life Cycle Engineering, Laboratoire, 200503.-05.04.2005 mehr…
  • Felgen, L.: Lead-Seminar für Führungskompetenz. CiDaD Nr.01/05 (01), 2005, 7 mehr…
  • Felgen, L.; Deubzer, F.; Lindemann, U.: Vorgehensmodell zur Identifikation kritischer Merkmale von mechatronischen Systemen. In: Mechatronik 2005 - Innovative Produktentwicklung, Tagung Wiesloch, 1. bis 2. Juni 2005. VDI, 2005, 253-272 mehr…
  • Felgen, L.; Deubzer, F.; Lindemann, U.: Complexity management during the analysis of mechatronic systems. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005, 409-411 mehr…
  • Fuchs, Daniel Karl: Konstruktionsprinzipien für die Problemanalyse in der Produktentwicklung. Dissertation, 2005 mehr…
  • Gahr, A.; Lindemann, U.: Individual Pathways - a cost management approach for product development in mass customization. 3rd Interdisciplinary World Congress on Mass Customization and Personalization (MCPC 2005), HKUST, 200518.-21.09.2005 mehr…
  • Gleichmar, Reiner: Approximationen und paralleles Rechnen bei der multidisziplin ƒ aren Strukturoptimierung. Dissertation, 2005 mehr…
  • Gourtovaia, M.; Shea, K.: ifForm developer's manual. Technical Report CUED/C-EDC/TR133., 2005 mehr…
  • Grieb, J.; Felgen, L.: Verteilte Entwicklung in interkulturellen Teams. Kolloquium zum 40jährigen Bestehen des Lehrstuhls für Produktentwicklung, 200507.10.2005, 21-30 mehr…
  • Grieb, J.; Fürst, F.; Diehl, H.; Lindemann, U.: 3D-Shared-Whiteboard - Ein Kommunikationsmedium für die verteilte Entwicklung. Konstruktion Nr.09/05, 2005, 107-113 mehr…
  • Grieb, J.; Lindemann, U.: Design Communication in Industry: A Survey Analysis. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005, 586-587 mehr…
  • Grieb, J.; Lindemann, U.: Providing Commmunication Media for Distributed Design. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005, 97-98 mehr…
  • Heiserer, Franz Xaver: Fast Reanalysis for Large Scale Multicriteria Structural Optimizatio. Dissertation, 2005 mehr…
  • Herfeld, U.; Kreimeyer, M.; Deubzer, F.; Lindemann, U: Application of CAD-Integrated FEM Analysis as a Step Towards Better Integration of Simulation into the Design Process. 9th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology, 200526.-30.09.2005, 1077-1080 mehr…
  • Hutterer, Philipp: Reflexive Dialoge und Denkbausteine für die methodische Produktentwicklung. Dissertation, 2005 mehr…
  • Jung, Chr.; Pecquet, N.; Herbig, B.: Implizites Wissen im Produktionsinnovatiosnprozess. CiDaD Nr.01/05 (01), 2005, 1-3 mehr…
  • Jung, Chr.; Voss, B.; Krane, M.; Schad, H.; Heimisch, W.; Lange, R.; Bauernschmitt, R.: Effect of “physiological” pulsatile perfusion on renal blood flow during cardiopulmonary bypass. 34.Jahrestagung der Deutschen Gesellschaft für Thorax-, Herz- und Gefäßchirurgie, 200513.-16.02.2005 mehr…
  • Jänsch, J.; Bruch, C.; Nissl, A.; Strasser, C.: The Importance of the Integration of Design Methods in Robust Engineering Design. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005, 536-537 mehr…
  • Kreimeyer, M.; Deubzer, F..; Herfeld, U.; Lindemann, U: Holistic Integration of CAD and CAE: Analysis and Combination of Diverse Current Approaches. 9th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, 200526.-30.09.2005, 1081-1084 mehr…
  • Kreimeyer, M.; Deubzer, F.; Herfeld, U..; Lindemann, U.: A Survey on Efficient Collaboration of Design and Simulation in Product Development. 23rd CADFEM Users' Meeting - International Congress on FEM Technology, CADFEM, 200509.-11.11.2005 mehr…
  • Kreimeyer, M.; Ponn, J.; Lindemann, U.: Analysis and Benchmark of Methods for Process Modeling. 9th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, 200526.-30.09.2005, 449-452 mehr…
  • Kuhn,T.; Berger,U.; Lang,M.; Baier,H.: Advanced tailplane designs and repair mechanisms for the semirigid airship Zeppelin NT. 5th AIAA Aviation, Technology, Integration, and Operations Conference (ATIO) and 16th AIAA Lighter-than-Air and Balloon Systems Conference (LTA), 2005 mehr…
  • Lang,M.; Baier,H.; Ernst,T.: High precision thin shell reflectors - design concepts, structural Optimization and shape adjustment techniques. Proc. of European Conference on Spacecraft Structures, Materials & Mechanical Testing 2005, 2005 mehr…
  • Langer, Harald: Extended Evolutionary Algorithms for Multiobjective and Discrete Design Optimization of Structures. Dissertation, 2005 mehr…
  • Lindemann, U.; Chakrabarti, A.; Grieb, J.; Felgen, L.: Examining Influence Factors in Cross-Cultural Distributed Design. 2nd German-Israeli Symposium for Design and Manufacture, Fraunhofer IRB, 200507.-08.07.2005, 23-33 mehr…
  • Lindemann, U.; Jung, Chr.; Feyrer, A.: Methode zur Unterstützung der Anforderungsklärung in fremddisziplinär bestimmten Projekten. ZWF Nr.1-2/05 (1-2), 2005, 53-58 mehr…
  • Lindemann, U.; Maurer, M.; Kreimeyer, M.: Intelligent strategies for structuring products. In: Clarkson, J. (Hrsg.): Engineering Design - Theory and Practice. Engineering Design Center, 2005, 106-115 mehr…
  • Lindemann, U.; Pecquet, N.; Jung, Ch.: Agiler Helfer im OP -Telemanipulationssystem Mobile Keyhole Surgery. TUM Mitteilungen Nr.04/05, 2005, 45-46 mehr…
  • Lindemann, Udo; Kiewert, A.: Kostenmanagement im Entwicklungsprozess - marktgerechte Kosten durch Target Costing. In: Schäppi, Bernd; Andreasen, Mogens M.; Kirchgeorg, Manfred; Radermacher, Franz - Josef (Hrsg.): Handbuch Produktentwicklung. Hanser, 2005, 397-417 mehr…
  • Maurer, M.: Produktkomplexität beherrschen mit MOFLEPS. CiDaD Nr.02/05 (02), 2005, 6-8 mehr…
  • Maurer, M.; Biedermann, W.: Specification of Individualized Products by Neural Networks. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005 mehr…
  • Maurer, M.; Boesch, N-O.; Sheng, G.; Tzonev, B.: A Tool for Modelling Flexible Product Structures - MOFLEPS. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005 mehr…
  • Maurer, M.; Lindemann, U.: Individualized Product Design by Evolutionary Algorithms. Knowledge-Based Intelligent Informations and Engineering Systems, 9th International Conference, Springer, 200514.-16.09.2005, 1359-1365 mehr…
  • Maurer, M.; Lindemann, U.: Sensitivity as an Assessment Criterion for Product Spectra. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005 mehr…
  • Maurer, M.; Rupp, T.; Lindemann, U.: Efficient Product Customization by Structure Synthesis. 3rd Interdisciplinary World Congress on Mass Customization and Personalization (MCPC 2005), HKUST, 200518.-21.09.2005 mehr…
  • Mörtl, M.: FlexMaUS: A methodology to fulfil the demands of sustainable production systems and less life-cycle costs during ramp-up. AEIPRO & Dpt. de Expresión Gráfica, Diseno y Proyectos de la Universidad de Málaga.: IX Congreso Internacional de Ingeniería de Proyectos: Proyectemos un Futuro Sostenible, 200522.-24.06.2005 mehr…
  • Müller, Michael: Modeling of the Structure-Optics-Interaction in Large Astronomical Telescopes. Dissertation, 2005 mehr…
  • Müller,U.; Baier,H.: Strain and Temperature Measurement with Fiber Optic Sensors in Composite Structures. Applications for Control and Health Monitoring, submittet to the GESA-Symposium, 2005 mehr…
  • Nißl, A.: Forschungsvorhaben zur Integration der Zielkostenverfolgung in die Produktentwicklung. CiDaD Nr.01/05, 2005, 5-6 mehr…
  • Nißl, A.: Target Costing - Kostenkontrollassistent für die Antriebstechnik. Antriebstechnik Nr.07/05, 2005, 28-30 mehr…
  • Nißl, A.; Lindemann, U.: Approach for an Integrated Achievement of the Cost Target. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005, 313-314 mehr…
  • Nißl, A.; Lindemann, U.: Integration of sourcing aspects into target costing. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005, 202-203 mehr…
  • Nißl, A.; Ponn, J.; Lindemann, U.: The Tutorensystem Garching: Education on social Competencies for Engineering Students. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005, 599-600 mehr…
  • Oosterom, R.; Ostayen, Raj van; Antonelli, V.; Bersee, Hen: The effect of friction between UHMWPE and PMMA bone cement on stresses in total shoulder arthroplasty. Journal of engineering in medicine (219(6)), 2005, pp. 425-435 mehr…
  • Pache, Martin Walter: Sketching for Conceptual Design – Empirical Results and Future Tools. Dissertation, 2005 mehr…
  • Pfeiffer,E.; Kaiser,C.; Schoeppinger,C.; Reutlinger,A.; Wierach,P.; Müller,M.; Müller,U.; Sciacovelli,D.: Design and Construction of an Active Piezo Actuated Tripod Allowing for Compensation of Focal Plane Distortions. European Conference on Spacecraft Structures, Materials and Mechanical Testing, 2005 mehr…
  • Ponn, J.; Braun, T.; Pecquet, N.; Lindemann, U.: CiDaD - Individual and Situational Assistance in Methodical Product Development. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005 mehr…
  • Ponn, J.; Lindemann, U.: Navigation durch die Produktkonkretisierung. 16. Symposium Design for X, Friedrich-Alexander-Universität Erlangen-Nürnberg, Lehrstuhl für Konstruktionstechnik, 200513.-14.10.2005, 87-97 mehr…
  • Ponn, J.; Lindemann, U.: Characterization of Design Situations and Processes and a Process Module Set for Product Development. 15th International Conference on Engineering Design ICED'05, Institution of Engineers Australia, 200515.-18.08.2005 mehr…
  • Raffaelli, Leonardo: Thermomechanics of Fibre Reinforced Epoxies for Cryogenic Pressurized Containment. Dissertation, 2005 mehr…
  • Reger,J.; Schneider,T.; Baier,H.: Multilevel Optimization with Parameterisation of Geometry for Components under Creep Loads in High Temperature Environments. EUROGEN 2005, 2005 mehr…
  • Sass, l.; Shea, K.; Powell, M.: Design production: constructing freeform designs with rapid prototyping. ECAADE 2005 Digital Design: the quest for new paradigms, Technical University of Lisbon, 2005, 261-268 mehr…
  • Schneider, S.; Lindemann, U.: Usage of methods in student projects. Studying Designers ´05 Aix-En-Provence, University of Provence, 200517.-18.10.2005, 267-276 mehr…
  • Schneider, S.; Lindemann, U.: On the interaction of processes, tasks and methods. 15th International CIRP Design Seminar 2005, 200522.-26.05.2005, 104-107. mehr…
  • Schneider, S.; Lindemann, U.: Anforderungen an ein Bewertungssystem für Methoden. 16. Symposium Design for X, Friedrich-Alexander-Universität Erlangen-Nürnberg, Lehrstuhl für Konstruktionstechnik, 200513.-14.10.2005, 11-16. mehr…
  • Schneider, S.; Pecquet, N.: Workshop@PE für Produktentwickler: Methodenanwendung im Produktentwicklungsalltag. TUM Mitteilungen Nr.05/05, 2005, 13 mehr…
  • Shea, K.; Gourtuvaia, M.: eifForm user's manual. Technical Report CUED/C-EDC/TR132., 2005 mehr…
  • Shea, K.; Luebkeman, C: CDO: computational design + optimization in building practice. The Arub Journa, 2005, 3 mehr…
  • Starling, A.C.; Shea, K.: A parallel grammar for simulation-driven mechanical Computational Design. ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 2005 mehr…
  • Starling, A.C.; Shea, K.: Virtual synthesisers for mechanical gear systems. 15th International Conference on Engineering Design ICED'05, Institution of Engineers, 200515.-18.08.2005, S. 120-121 mehr…
  • Stetter, R.; Baumberger, C.; Lindemann, U.: Success factors in collaboration management in industrial product development. Knowledge-Based Intelligent Informations and Engineering Systems, 9th International Conference, Institution of Engineers Australia, 200514.-16.09.2005 mehr…
  • Stetter, R.; Lindemann, Udo: The transfer of methods into industry. In: Clarkson, J.; Eckert, C. (Hrsg.): Design process improvement - A review of current practice. Springer, 2005, 436-461 mehr…
  • Wach, J.J.; Anton, T.; Graebsch, M.; Schneider, S.: Workshop Krisenmanagement: Probleme im Spannungsfeld zwischen Vermeidung und Bewältigung. CiDaD Nr.02/05, 2005, 4-5 mehr…
  • Zimmermann, M.; Wineman, A.: On the Elastic Behavior of Scission Materials. Mathematics and Mechanics of Solids 10 (1), 2005, 63-88 mehr…
  • Zimmermann, Markus: A continuum theory with long-range forces for solids. Dissertation, 2005 mehr…

2004

  • Gausemeier, J.; Lindemann, U.; Schuh, G. (Hrsg.): Planung der Produkte und Fertigungssysteme für die Märkte von morgen. VDMA, 2004 mehr…
  • Antonelli, V.; Labordus, M.; Nederveen, P.J.: Composite End-Closures for an Authonomous Underwater Vehicle, Design and Manufacturing. International Conference on Flow Processes in Composite Materials, 2004 mehr…
  • Baier,H.; Huber,M.; Gleichmar,R.: Integrierte strukturmechanische und fertigungsorientierte Entwurfsoptimierung. International Journal for Industry, Research and Application (Vol. 80 (12)), 2004, pp. 1417 - 1420 mehr…
  • Baier,H.; Huber,M.; Pühlhofer,T.: Multidisciplinary design optimization in early design configuration phases. Proceedings of modeFRONTIER 2004 User's Meeting, 2004 mehr…
  • Baier,H.; Langer,H.: Integrated Design Optimization of Structural and Actuator Parameters in Reflector Shape Control. Proceedings SPIE - Astronomical Telescopes and Instrumentation, 2004 mehr…
  • Baier,H.; Pühlhofer,T.; Huber,M.; Langer,H.: Configuration Design Optimization with Geometrical and Physical Constraints by Combining CAD-, FEM- and Optimization -Tools. 22. CADFEM User´s Meeting, 2004 mehr…
  • Baier,H.; Tan,H.; Datashvili,L.: Deployment dynamics of inflatable fabric prepreg tubes with application concepts for stowable reflectors. Proceedings 2nd European Workshop on Inflatable Space Structures, 2004 mehr…
  • Baldock, R.; Shea, K.: Structural systems optimization techniques for the building industry. Next Generation - Intelligent Systems in Engineering, The 11th International Workshop of the European Group for Intelligent Computing in Engineering (EG-ICE), 2004, 11-15 mehr…
  • Baumberger, C.: Industriekolloquium des Sonderforschungsbereichs 582 in München. , 200429.04.2004, 5-6 mehr…
  • Baumberger, C.; Gahr, A.: Individualisierte Produkte im Fokus der intergrierten Produktentwicklung. CiDaD Nr.01/01 (01), 2004, 3-4 mehr…
  • Baumberger, C.; Gahr, A.; Lindemann, U.: Zielkostenorientierte Steuerung individualisierter Entwicklungsprozesse. In: I2P 2004 - Integrierte Informationsverarbeitung in der Produktentstehung. VDI, 2004, 133-155 mehr…
  • Baumberger, C.; Gahr, A.; Schneider, S.: Verein Zentrum für Entwicklungsmethoden zur Förderung der Weiterentwicklung von Methoden. CiDaD Nr.01/01 (01), 2004, 7 mehr…
  • Baumberger, C.; Lindemann, U.: Skilling Engineering Students Softly - A Project Review on the Educational Program Tutorensystem Garching. International engineering and product design education conference, 200402.-03.09.2004, 135-142 mehr…
  • Baumberger, C.; Lindemann, U.; Pulm, U.; Skull, M.; Stetter, R.; Kaindl, W.: Methods of Monitoring the testing status of variant rich products. 8th International Design Conference DESIGN 2004, 200418.-21.05.2004, 111-116 mehr…
  • Baumberger, C.; Stegmann, R.; Stotko, C.: Szenario 2015 - Eine Vision der marktnahen Produktion individualisierter Produkte. Industriekolloquium Sonderforschungsbereich 582, 200429.04.2004, 2.1-2.20. mehr…
  • Berger, T.; Braun, T.; Breuer, T.; Grawatsch, M.; Leffin, T.; Vienenkötter, A.: Leitfaden und Methoden. In: Gausemeier, Jürgen; Lindemann, Udo; Schuh, Günther (Hrsg.): Planung der Produkte und Fertigungssysteme von morgen. VDMA, 2004, 43-185 mehr…
  • Berger,U.; Baier,H.: Experimental and Analytical Investigations in Structural Health Monitoring with LAMB-Waves. Proceedings vom 2nd European Workshop on Structural Health Monitoring, 2004 mehr…
  • Berger,U.; Müller,U.; Baier,H.: Strukturüberwachung mit integrierter faseroptischer Sensorik und Lamb-Wellentechnik. Deutscher Luft- und Raumfahrtkongress 2004, 2004 mehr…
  • Braun, S.; Roloefsen, J.; Schneider, S.: Ferienakademie 2003. TUM - Report Nr.02/04 (02), 2004, 21 mehr…
  • Braun, T.: Vorgehen zur Strategischen Produkt- und Prozessplanung. In: Gausemeier, J.; Lindemann, U.; Schuh, G. (Hrsg.): Planung der Produkte und Fertigungssysteme für die Märkte von morgen. VDMA, 2004, 17-42 mehr…
  • Braun, T.: Strategische Produktplanung. CiDaD Nr.02/01 (02), 2004, 1-3 mehr…
  • Braun, T.; Gausemeier, J.; Lindemann, U.; Orlik, L.; Vienenkötter, A.: Design Support by Improving Method Transfer - A Procedural Model and Guidelines for Strategic Product Planning in Small and Medium-sized Enterprises. 8th International Design Conference DESIGN 2004, 200418.-21.05.2004, 143-148 mehr…
  • Braun, T.; Lindemann, U.: Method adaptation - A way to improve methodical product development. 8th International Design Conference DESIGN 2004, 200418.-21.05.2004, 977-982 mehr…
  • Braun, T.; Müller, F.: Das neue CiDaD-Portal - webbasierte Unterstützung für den Methodeneinsatz in der Produktentwicklung. CiDaD Nr.01/01 (01), 2004, 2 mehr…
  • Datashvili,L.; Lang,M.; Baier,H.: Advanced reflector concepts. Deutscher Luft- und Raumfahrtkongress 2004, 2004 mehr…
  • Diehl, H.; Lindemann, U.; Müller, F.; Schneider, S.: A new approach for gesture-based sketching. 8th International Design Conference DESIGN 2004, 200418.-21.05.2004, 735-740 mehr…
  • Diehl, H.; Müller, F.; Lindemann, U.: From raw 3D-Sketches to exact CAD product models - Concept for an assistant-system. Workshop on Sketch-Based Interfaces and Modeling 2004, 200430.-31.08.2004 mehr…
  • Diehl, H.; Müller, F.; Lindemann, U.: Konzept zur Konkretisierung von 3D-Skizzen in einer Virtual-Reality-Umgebung. Augmented & Virtual Reality in der Produktentstehung, Heinz Nixdorf Institut, 200417.-18.06.2004, 73-82 mehr…
  • Diehl, H.; Müller, F.; Schneider, S: Virtual Reality zur Unterstützung kreativer Entwicklungsprozesse. CiDaD Nr.01/01 (01), 2004, 5-6 mehr…
  • Encinar,J.; Zornoza,J.; Arrebola,M.; Datashvili,L.; Baier,H.; Legay,H.; Toso,G.: Design of a Three-Layer Printed Reflectarray for Dual Polarisation and Dual Coverage. 27th ESA Antenna Technology Workshop on Innovative Periodic Antennas, 2004 mehr…
  • Felgen, L.; Grieb, J.; Lindemann, U.; Pulm, U.; Chakrabarti, A.; Vijaykumar, G.: The impact of cultural aspects in the design process. 8th International Design Conference DESIGN 2004, Sveucilisna tiskara, 200418.-21.05.2004, 1475-1480 mehr…
  • Felgen, L.; Grieb, J.; Pulm, U.: Spielzeug der Kulturen. TUM - Report, 2004, 38-39 mehr…
  • Felgen, L.; Grieb, J.; Pulm, U.: Kooperation IISc und TUM: Der Einfluss kultureller Aspekte auf den Entwicklungsprozess. CiDaD News Nr.01/01 (01), 2004, 4 mehr…
  • Fest, E.; Shea, K.; Smith, I.: Active tensegrity structure. ASCE Journal of Structural Engineering 130 (10), 2004, 1454-1465 mehr…
  • Gahr, A.: Mitlaufende Kostenkalkulation in der Produkterstellungsphase. CiDaD Nr.02/01 (02), 2004, 6-7 mehr…
  • Gahr, A.; Lindemann, U.: Ein methodischer Ansatz zur induzierten Kostenkalkulation individualisierter Produkte. 15. Symposium Design for X, Friedrich-Alexander-Universität Erlangen-Nürnberg, Lehrstuhl für Konstruktionstechnik 2004,, 200414.-15.10.2004, 159-168 mehr…
  • Gahr, A.; Lindemann, U.; Saltykov, A.: Implementation of target costs in mass customization design process. 8th International Design Conference DESIGN 2004, 200418.-21.05.2004, 1027-1032 mehr…
  • Gan, MD.; Verheus, AS; Antonelli, V.: Tilting bird - Design of a composite safety fence. 7th World Pultrusion Conference, 2004 mehr…
  • Gausemeier, J.; Lindemann, U.; Braun, T.; Orlik, L.; Vienenkötter, A.: Ein Vorgehensmodell zur strategischen Produkt- und Prozessplanung in kleinen und mittleren Unternehmen. Konstruktion 56 (3), 2004, 65-70 mehr…
  • Gourtovaia, M.; Shea, K.; Bracewell, R.: Developing Intuitive and Interactive Software Demonstrators for Computational Design Methods. Next Generation - Intelligent Systems in Engineering, the 11th International Workshop of the European Group for Intelligent Computing in Engineering (EG-ICE), 2004, 1-10 mehr…
  • Gramann, J.: Vergessene Erfindungen. CiDaD Nr.01/01 (01), 2004, 6 mehr…
  • Gramann, Jens: Problemmodelle und Bionik als Methode. Dissertation, 2004 mehr…
  • Grieb, J.: Hannover Messe 2004: Individualisierte Produkte und Bionik im Fokus. CiDaD News Nr.02/01 (02), 2004, 7-8 mehr…
  • Heßling, T.; Lindemann, U.: Introduction of the integrated product policy in small and medium-sized enterprises. 8th International Design Conference DESIGN 2004, 200418.-21.05.2004, 1057-1062 mehr…
  • Hu, X. Y.; Khoo, B. C., Zhang, D.L.; Jiang, Z.L.: The cellular structure of a two-dimensional H 2/O 2/Ar detonation wave. Combustion Theory and Modelling (8), 2004, pp.- 1-21 mehr…
  • Hu, X. Y.; Khoo, B. C.; Zhang, D. L.; Jiang, Z. L.: The structure and evolution of a two-dimensional H_2/O_2/Ar cellular detonation. Shock Waves (14), 2004, pp. 37-44 mehr…
  • Hu, X. Y.; Khoo, B.C.: An interface interaction method for compressible multifluids. Journal of Computational Physics (198), 2004, pp. 35-64 mehr…
  • Hutterer, P.: Was brauchen Entwickler? - Eine Beobachtung vor der Entwicklung und Bereitstellung neuer Methoden und Tools. CiDaD News Nr.02/01 (02), 2004, 3-4 mehr…
  • Hutterer, P.; Eris, O.; Jung, M.; Leifer, L.; Lindemann, U.; Mabogunje, A.: What do Designers really need? - An Explorative Experiment before Developing Teaching Tools and Methods. Cognition and Exploratory Learning in Digital Age CELDA 2004, 200415.-17.12.2004, 419-422 mehr…
  • Hutterer, P.; Stößer, R.; Diehl, H.; Forzi, T.; Peters, M.; Winkelmann, K.: Angewandtes Wissensmanagment ist immer ein individueller Weg - Praxiserfahrungen und kritische Erfolgsfaktoren am Beispiel der W.E.T. Automotive Systems AG. KnowTech 2004, 200418.-19.10.2004, 67-76 mehr…
  • Jowers, I.; Prats, M.; Earl, C.; Garner, S.: On curves and computation with shapes. International Symposium on Generative CAD Systems, School of Architecture, Carnegie Mellon University, 200412.-14.07.2004, 439-457 mehr…
  • Jung, Chr.; Gramann, J.: Optimisation of the pressure and flow ration under extracorporeal circulation. 2004, mehr…
  • Langer,H.; Pühlhofer,T.; Baier,H.: A Multiobjective Evolutionary Algorithm with Integrated Response Surface Functionaltities for Configuration Optimization with Discrete Variables. Proceedings 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference 2004, 2004 mehr…
  • Lindemann, U.: Entwicklungsmethodik in der industriellen Praxis. Konstruktion 56 (4), 2004, 3 mehr…
  • Lindemann, U.: Action orientation of methods to support engineering design. Management of Design Complexity, 200407.-09.10.2004, 45-50 mehr…
  • Lindemann, U.; Baumberger, C.: Marktchance Individualisierung - Chancen und Herausforderungen. Industriekolloquium Sonderforschungsbereich 582, 200429.04.2002, 1.1 - 1.8. mehr…
  • Lindemann, U.; Baumberger, C.: Bewertung von Innovationsleistungen in der Unternehmung. ZWF Nr.99/04 (7/8), 2004, 365-375 mehr…
  • Lindemann, U.; Baumberger, C.; Pulm, U.: Koordination und Controlling verteilter Produktentwicklungsprozesse. TFB 29. Montageautomatisierung durch Integration von Konstruktion und Planung. Arbeits- und Ergebnisbericht, TU München, 2004, 47-76 mehr…
  • Lindemann, U.; Braun, T.; Collin, H.; Pecquet, N.; Ponn, J.: Transfer von Produktentwicklungs-Know-how in Lehre und Praxis. ZWF Nr.99/04 (11/2004), 2004, 653-658 mehr…
  • Lindemann, U.; Gramann, J.: Bionik: Chance oder Modeerscheinung. Konstruktion 56 (4), 2004, 67-70 mehr…
  • Lindemann, U.; Gramann, J.: Engineering design using biological principles. 8th International Design Conference DESIGN 2004, 200418.-21.05.2004, 355-360 mehr…
  • Lindemann, U.; Hutterer, P.: Environmental Problems: Motivation for SMEs towards green thinking? TMCE 2004, Millpress, 200413.-17.04.2004, 1161 mehr…
  • Lindemann, U.; Ponn, J.: Produktindividualisierung - wirtschaftliche Planung und Gestaltung. Industriekolloquium Sonderforschungsbereich 582 - Marktnahe Produktion individualisierter Produkte, Herbert Utz, 200429.04.2004 mehr…
  • Lindemann, U.; Schuh, G.; Braun, T.; Leffin, T.: Implementierung strategischer Produkt- und Prozessplanung in die unternehmerische Praxis. PPS Management Nr.09/04 (4/2004), 2004, 17-20 mehr…
  • Lindemann, U.; Schuh, G.; Kohlhase, N.; Braun, T.; Breuer, T.: Erfolgreich Entwicklungsprojekte planen - Wie LEWA die richtige Methode ausgewählt, angepasst und implementiert hat. ZWF 99 (2004) (6), 2004, 296-301 mehr…
  • Mateika, M.; Hesselbach, J.; Heßling, T.; Lindemann, U.; Schneider, S.: Environmental oriented product planning: Sucess factors and obstacles. TMCE 2004, 200412.-16.04.2004, 1157-1158 mehr…
  • Maurer, M.: Rechnerwerkzeuge für die Planung von individuellen Produkten. Industriekolloquium Sonderforschungsbereich 582, 200429.04.2004 mehr…
  • Maurer, M.: Strukturanalyse komplexer Produktspektren. ZWF Nr.99/04 (10/2004), 2004, 533 mehr…
  • Maurer, M.; Janitza, D.; Ott, A.: Product- and CAD-Structure Planning Processes for Mass Customization Products. 7th biennial conference on engineerung systems design and analysis, 200419.-22.07.2004 mehr…
  • Maurer, M.; Pulm, U.; Lindemann, U.: Utilization of graph constellations for the development of customizable product spectra. ICSC Interdisciplinary Research, 200429.02.-02.03.2004 mehr…
  • Maurer, M.; Pulm, U.; Lindemann, U.: A process model for designing fuzzy product structures. 8th International Design Conference DESIGN 2004, 200418.-21.05.2004, 383-388. mehr…
  • Maurer, Maik; Lindemann, Udo: Identification of Structural Characteristics in Product Spectra. In: Knowledge-Based Intelligent Information and Engineering Systems. Springer, 2004, 1157-1163 mehr…
  • Müller, F.; Lex, S.; Briegel, C.; Lindemann, U.: An innovative user interface for intuitive 3D-sketching in an augmented reality environment. 8th International Design Conference DESIGN 2004, 200418.-21.05.2004, 793-798 mehr…
  • Müller,M.; Wilhelm,R.; Scales,K.; Baier,H.: Integrated Modeling for the VLTI: Validation and Results. proceedings SPIE - Astronomical Telescopes and Instrumentation, 2004 mehr…
  • Müller,U.; Raffaelli,L.; Reutliner,A.; Latka,I.; Ecke,W.; Tumino,G.; Baier,H.: Integration and Operation of Fiber Optic Sensors in Cryogenic Composite Tank Structures. Proceedings 2nd European Workshop on Structural Health Monitoring, 2004 mehr…
  • Nißl, A.; Lindemann, U: Zielkostenerreichung im Rahmen globaler Beschaffungsmöglichkeiten. 15. Symposium Design for X, 200414.-15.10.2004, 153 - 158 mehr…
  • Nißl, A.; Lindemann, U.: Reaching the Cost Target - Current Status in SMEs. 8th International Design Conference DESIGN 2004, 200418.-21.05.2004, 883-888 mehr…
  • Pauw, de I.; Kuilen, JWG van de; Antonelli, V.; Bak, W.: Wooden Guardrail – from policy to practice. Drukkery de Ryn/Velp, 2004 mehr…
  • Pfeiffer,E.; Kaiser,C.; Ernst,T.; Schöppinger,C.; Reutlinger,A.; Wierach,P.; Müller,M.: Aktive Deformationskontrolle anhand einer Dreibeinstruktur eines Raumfahrtteleskops. Proceedings Adaptronic Congress, 2004 mehr…
  • Ponn, J.; Baumberger, C.; Lindemann, U.: Guidelines for the Development of individualized products. 8th International Design Conference DESIGN 2004, Sveucilisna tiskara, 200418.-21.05.2004, 465-470 mehr…
  • Ponn, J.; Braun, T.; Lindemann, U.: Zielgerichtete Produktentwicklung durch modulare Prozessstrukturen und situationsgerechte Methodenauswahl. 15. Symposium Design for X, 200414.-15.10.2004, 113-122 mehr…
  • Ponn, J.; Lindemann, U.; Diehl, H.; Müller, F.: Sketching in early conceptual phases of product design: guidelines and tools. EUROGRAPHICS Workshop on Sketch-Based Interfaces and Modeling, Eurographics Association, 200430.-31. 8.2004, 27-32 mehr…
  • Prats, M.; Jowers, I.; Earl, C.; Garner, S.: Improving product design via a shape grammar tool. 8th International Design Conference, The Design Society, 200418.-21.05.2004, 477-482 mehr…
  • Pulm, Udo: Eine systemtheoretische Betrachtung der Produktentwicklung. Dissertation, 2004 mehr…
  • Pühlhofer,T.; Langer,H.; Baier,H.; Huber,M.: Multicriteria and Discrete Configuration and Design Optimization with Applications for Satellites. Proceedings 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference 2004, 2004 mehr…
  • Schneider, S.: TRIZ-Implementierung in KMU. TRIZ-Implementierung in KMU, 200423.-24.06.2004, 26 mehr…
  • Schneider, S.; Erdell, E.; Lindemann, U: Approach for method transfer to civil engineering. Nord Design 2004 - Product Design in Changing Environment, 200418.-20.08.2004 mehr…
  • Schneider, S.; Lindemann, U.: Implementation of modern aspects on design education. International engineering and product design education conference, 200402.-03.09.2004, 354 mehr…
  • Shea, K.: Explorations in using an aperiodic spatial tiling as a design generator. DCC'04, 1st International Conference on Design Computing and Cognition 2004, 2004, 137-258 mehr…
  • Shea, K.: Directed randomness. In: Lech, N.; Turnball, D.; Williams, C. (Hrsg.): Digital tectonics. Wiley, 2004, 10-23 mehr…
  • Shea, K.; Aish, R.; Gourtovaia, M.: Towards integrated performance-driven generative design tools. Automation in Construction, Special Issue on the eCAADe 03 Conference 14(2), 2004, 253-264 mehr…
  • Shea, K.; Zhao, X.: A novel noon Mark Cantilever support: from design generation to realization. IASS 2004: Shell and Spatial Sturctures from Models to Realization, 2004 mehr…
  • Suppapitnarm, A.; Parks, G.T.; Shea, K.; Clarkson, P.J.: Conceptual design of bicycle frames by multiobjective shape annealing. Engineering Optimization 36 (2), 2004, 165-188 mehr…
  • Tan,H.; Baier,H.;: Inflation and deployment simulation for folded tubes made of rigidizable fabric prepreg. Proceedings 6th World Congress on Computational Mechanics, 2004 mehr…
  • Zauner,C.; Baier,H.: Aktoren und Mechatronik-Komponenten zur Vibrationskontrolle und für weitere Anwendungen in Satelliten. Mechatronik (Heft 5), 2004 mehr…
  • Zauner,C.; Baier,H.: Module im Weltraum – Tests mechatronischer Elemente für die Raumfahrt. Design&Elektronik (Heft 03), 2004, Seite 60 mehr…
  • Zauner,C.; Baier,H.: Formkontrolle und Schockreduktion bei Satelliten und hochpräzisen Systemen. Proceedings Adaptronic Congress 2004, 2004 mehr…
  • Zhao, C.; Shea, K.: Performance-based structural synthesis of spatial truss systems. 2nd International Conference of Steel and Composite Structures, ICSCS'04, 2004 mehr…
  • Zhao, X.; Shea, K.: Computational Synthesis of Three-dimensional Discrete Structures. 8th International Symposium on Structural Engineering for Young Experts, 2004, 42-49 mehr…

2003

  • Lindemann, U. (Hrsg.): Human Behaviour in Design. Springer, 2003 mehr…
  • Antonelli, V.; Bergsma, O.K.: The Design of the Composite End Closures for an Autonomous Underwater Vehicle. WITpress, 2003 mehr…
  • Baier,H.; Müller,M.: Active Precision Structures and Components in Precision Payloads. 54th International Astronautical Congress (IAC), 2003 mehr…
  • Baier,H.; Reindl,M.: Adaptive structures and mechatronic components for vibration and shape control of satellite precision payloads. European Space Mechanisms and Tribology Symposium (ESMATS), 2003 mehr…
  • Baumberger, Chr.; Leitschuh, T.; Mauser, P.; Schneider, S.: Tutorensystem fest etabliert. TUM Mitteilungen Nr.01/03-04, 2003, 31-32 mehr…
  • Baumberger, Chr.; Lindemann, U.; Ponn, J.: Development of Individualized Mechatronic Products - Rapid Adaptation of Product Properties Due To Individual Customer Demands. 2nd Interdisciplinary World Congress on Mass Customization and Personalization 2003 (MCPC03), TU, 200306.-08.10.2003 mehr…
  • Baumberger, Chr.; Lindemann, U.; Ponn, J.: Prozessanforderungen und - gestaltung der Übersetzung individueller Kundenwünsche in Produktdefinitionen. 14. Symposium Design for X, Friedrich-Alexander-Universität Erlangen-Nürnberg, Lehrstuhl für Konstruktionstechnik, 200313. und 14. Oktober 2003, 129-136 mehr…
  • Baumberger, Chr.; Lindemann, U.; Pulm, U.: The Strategic Process For Developing A Building Set For Complex Products. 14th International Conference on Engineering Design ICED'03, Design Society, 200319.-21.08.2004 mehr…
  • Baumberger, Chr.; Pulm, U.; Lindemann, U.: Coordination And Controlling Of Distributed Product Development Processes. 14th International Conference on Engineering Design ICED'03, Design Society, 200319.-21.08.2003 mehr…
  • Bayerisches Staatsministerium: IPP-Methodenblätter. , Hrsg.: Umweltfragen; , Bayerisches Staatsministerium für Landesentwicklung und: (IPP-Methodenblätter zum Download), 2003, mehr…
  • Bayerisches Staatsministerium: Neue Wege für innovative KMU - Ergebnisse des Pilotprojekts IPP in kleinen und mittleren Unternehmen (KMU). Grafex, 2003 mehr…
  • Braun, T.; Lindemann, U.: Supporting the Selection, Adaptation and Application of Methods in Product Development. 14th International Conference on Engineering Design ICED'03, Design Society, 200319.-21.08.2003 mehr…
  • Domer, B.; Raphael, B.; Shea, K.; Smith, I.: A study of two stochastic search methods for structural control. ASCE Journal of Computing in Civil Engineering 194 (4), 2003, 515-526 mehr…
  • Eckert, C.; Pulm, U.; Jarratt, T.: Mass Customisation, Change and Inspiration - Changing Designs to Meet New Needs. 14th International Conference on Engineering Design ICED'03, Design Society, 200319.-21.08.2003 mehr…
  • Ehrlenspiel, K.: On the Importance of the Unconscious and the Cognitive Economy in Design. In: Lindemann, U. (Ed.) (Hrsg.): Human Behaviour in Design. Springer, 2003, 25-41 mehr…
  • Ehrlenspiel, K.: Rodenacker, Wolf Georg. In: (Hrsg.), Historische Kommission bei der Bayerischen Akademie der Wissenschaften (Hrsg.): Neue Deutsche Biographie. Duncker & Humblot, 2003, 692-693 mehr…
  • Fest, E.; Shea, K.; Domer, B.; Smith, I.: Adjustable Tensegrity Structures. ASCE Journal of Structural Engineering 129 (4), 2003, 515-526 mehr…
  • Forzi, T.; Winkelmann, K.; Killich, S.; Hutterer, P.; Chwallek, C.: Etablierung der Dienstleistung Wissensmanagement in vernetzten Organisationsstrukturen. In: Luczak, H. (Hrsg.) (Hrsg.): Kooperation und Arbeiten in vernetzten Welten. Ergonomia, 2003, 261-265 mehr…
  • Fuchs, D. K.; Jokele, B.: Classification Of Product Information In General Context-Individual Dynamic Modelling To Support Quick Understanding. 3rd International Conference Advanced Engineering Design 2003 (AED2003), Czech Technical University in Prague, 200301.-04.06.2003 mehr…
  • Förster, Michael: Variantenmanagement nach Fusionen in Unternehmen des Anlagen- und Maschinenbaus. Dissertation, 2003 mehr…
  • Hol, J.; Antonelli, V.: Progressive Damage Modelling of FML´s. Implementation in a UMAT subroutine. ABAQUS User Conference, 2003 mehr…
  • Huber,M.; Baier,H.: Entwurf eines hochgenauen entfaltbaren Membranreflektors für Satelliten. Proc. DGLR Jahrestagung, 2003 mehr…
  • Janitza, D.; Lacher, M.; Maurer, M.; Pulm, U.; Rudolf, H.: A product model for Mass-Customisation products. 7th International Conference, KES 2003 (Part 2), Springer, 2003Sep 03, 1023-1029 mehr…
  • Jokele, B.; Fuchs, D. K.: Entwicklungstätigkeit in zeitkritischen Situationen. 14. Symposium Design for X, Friedrich-Alexander-Universität Erlangen-Nürnberg, Lehrstuhl für Konstruktionstechnik, 200313.-14.10.2003 mehr…
  • Jokele, B.; Fuchs, D.K.: Reducing Time for Product Development Process by Evaluation in the Phase of Solution Searching. 3rd International Conference Advanced Engineering Design 2003 (AED2003), Czech Technical University in Prague, 200301.-04.06.2003 mehr…
  • Kettembeil, S.; Baumberger, Chr.: Ufos im Maschinenwesen. TUM Mitteilungen Nr.01/03-04, 2003, 30 mehr…
  • Klammer,J.; Baier,H.: Vibroakustik und Wärmetransport doppelschaliger CFK-Rümpfe. Proc. DGLR Jahrestagung, 2003 mehr…
  • Lindemann, U.: Produkte im Wettbewerb - Potenziale aus Konstruktion / Entwicklung. Chancen und Nutzen der Integrierten Produktpolitik (IPP) für die Wirtschaft, 200306.02.2003 mehr…
  • Lindemann, U.: Methods are networks of Methods. 14th International Conference on Engineering Design ICED'03, Design Society, 200319.-21.08.2003 mehr…
  • Lindemann, U.; Baumberger, Chr.; Freyer, B.; Ponn, J.: Übersetzung individueller Kundenwünsche in Produktdefinitionen – 49-78. In: Lindemann, U. (Hrsg.): SFB 582. Marktnahe Produktion individualisierter Produkte. Arbeits-und Ergebnisbericht 2001-2002-2003-2004. TU, 2003 mehr…
  • Lindemann, U.; Gramann, J.: Innovation durch Bionik - Ein Fallbeispiel aus der Warengüterindustrie. ZWF Nr.09/03, 2003, 447-449 mehr…
  • Lindemann, U.; Heßling, T.: Integrated Product Policy in Small and Middle-Sized Companies. Proceedings-Colloquium e-ecological Manufacturing, SFB 281, 200327.-28.03.2003, 129-134 mehr…
  • Lindemann, U.; Heßling, T.; Hutterer, P.: Introduction and Adaptation of Methods for Sustainable Product Development in Small and Middle-Sized Companies - Results and Experiences. 14th International Conference on Engineering Design ICED'03, Design Society, 200319.-21.08.2003 mehr…
  • Lindemann, U.; Jung, Chr.; Gramann, J: Fremddisziplinär bestimmte mechatronische Entwicklungsprozesse. ZWF Nr.03/03, 2003, 102-107 mehr…
  • Lindemann, U.; Maurer, M.; Pulm, U.: Methods, Tools, and Processes or the Design and Development of Individualised Products. 14th International Conference on Engineering Design ICED'03, Design Society, 200319.-21.08.2003 mehr…
  • Lindemann, U.; Müller, F.; Pache, M.; Schneider, S.: Der 3D-Skizzierer - Unscharfes digitales Skizzieren in einer Virtual Reality Umgebung. In: Szwillus, Gerd; Ziegler, Jürgen (Hrsg.): Mensch & Computer 2003: Interaktion in Bewegung. B. G. Teubner, 2003, 411-412 mehr…
  • Lindemann, U.; Pulm, U.; Ponn, J.; Gahr, A.; Freyer, B.: Individualisierte Produkte aus Sicht der Produktentwicklung. In: Piller, Frank Thomas; Stotko, C. (Hrsg.): Mass Customization und Kunden-Integration: Neue Wege zum innovativen Produkt. Symposium, 2003 mehr…
  • Lindemann, Udo: Individuelle Produkte - In Serienfertigung. In: Zukunft im Brennpunkt (Band 2) - Forschungsverbünde in Bayern. Arbeitsgemeinschaft der Bayerischen Forschungsverbünde Abayfor. TU München, 2003, 41-46 mehr…
  • Lindemann, Udo; Baumberger, Chr.; Freyer, B.; Gahr, A.; Ponn, J.; Pulm, U.: Entwicklung individualisierter Produkte. In: Reinhart, Günther; Zäh, Michael (Hrsg.): Marktchance Individualisierung. Springer, 2003, 13-29 mehr…
  • Mörtl, M.: Planung und Entwicklung upgradinggerechter Produkte. Konstruktion 55 (6./7.), 2003, 41-45 mehr…
  • Mörtl, M.: "Design for Upgrading" of machines and production processes: A guideline based on actual demands of industry and sustainable design. 14th International Conference on Engineering Design ICED'03, Design Society, 200319.-21.08.2003, 10 mehr…
  • Mörtl, M.; Heßling, T.: Entwicklung upgradinggerechter Produkte – Kap. 3.3.14. In: Birkhofer, H.; Spath, D.; Winzer, P.; Müller, D. (Hrsg.): Umweltgerechte Produktentwicklung - Ein Leitfaden für Entwicklung und Konstruktion. Beuth, 2003 mehr…
  • Müller, F.; Pache, M.; Lindemann, U.: Digital Free Hand Sketching in 3D-A tool for early design phases. 14th International Conference on Engineering Design ICED'03, Design Society, 200319.-21.08.2003 mehr…
  • Müller, F.; Pache, M.; Schneider, S.; Lindemann, U.: Free-Hand Sketching for creative work in early design phases. 1st International Conference on Advanced Research in Virtual and Rapid Prototyping, Escola Superior de Tecnologia e Gestão de Leiria, 200301.-04.10.2003 mehr…
  • Müller, F.; Schneider, S.; Diehl, H.; Pache, M.; Lindemann, U.: Optimierung des User-Interfaces beim VR-unterstützten 3D-Skizzieren. 2. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung, 2003 mehr…
  • Müller, S.; Stricker, H.; Lindemann, U.; Zäh, M.: Kostenoptimale Technologieauswahl in der Montagesystemplanung. ZWF Nr.98/03 (9), 2003, 2-6 mehr…
  • Müller,J.; Zauner,C.: Low shock release unit - easy resettable and 100 % reusable. European Space Mechanisms and Tribology Symposium (ESMATS), 2003 mehr…
  • Pulm, U.; Maurer, M.; Lindemann, U.: Early evaluation of product properties for individualized products. 2nd Interdisciplinary World Congress on Mass Customization and Personalization (MCPC'03), 200306.-08.10.2003 mehr…
  • Pühlhofer,T.; Baier,H.: Approaches for further rationalisation in mechanical architecture and structural design of satellites. 54th International Astronautical Congress (IAC), 2003 mehr…
  • Pühlhofer,T.; Langer,H.; Baier,H.: Towards a Configuration Design Optimization Method. 5th World Congress on Structural and Multidisciplinary Optimization (ISSMO), 2003 mehr…
  • Pühlhofer,T.; Wilke,M.; Baier,H.; Igenbergs,E.: Integrating thermal and mechanical engineering expertise in conceptual satellite design centers. European Conference on spacecraft structures materials and mechanical testing, 2003 mehr…
  • Shea, K.: The Amsterdam Canopy: designing and prototyping a computer generated structural form. Structural Morphology Group: Newsletter No. 12: International Association of Space Structures (IASS) (12), 2003 mehr…
  • Shea, K.: Generative design: blurring the lines between architect, engineer and computer. Architectural design: home front: new development in housing (July/August 2003), 2003 mehr…
  • Shea, K.: Digital canopy: high-end computation/low-tech construction. Architectural Research Quarterly 6 (3), 2003, 230-245 mehr…
  • Shea, K.; Aish, R.; Gourtovaia, M.: Towards integrated performance-based generative design tools. eCAADe 03, 21st Conference on Education in Computer Aided Architectural Design in Europe, Graz University of Technology, 2003, 553-560 mehr…
  • Shea, K.; Starling, A.C.: From discrete structures to mechanical systems: A framework for creating performance-based parametric synthesis tools. AAAI'03 Spring Symposium 'Computational Synthesis', 2003, 210-217 mehr…
  • Silling, S.A.; Zimmermann, M.; Abeyaratne, R.: Deformation of a Peridynamic Bar. Journal of Elasticity 73 (1-3), 2003, 173-190 mehr…
  • Starling, A.C.; Shea, K.: A grammatical approach to computational generation of mechanical clock designs. 14th International Conference on Engineering Design ICED'03, 2003, 183-184 mehr…
  • Tsouvalis, N.; Chauchot, P.; Livingstone, F.; Papazoglou, V.; Antonelli, V.; Williams, J.: Structural Design of Deep Water Composite Pressure Housings-Material Selection and Modeling Guidelines. IMDC, 2003 mehr…
  • Zhao, C.; Shea, K.: An introduction to structural synthesis for modern spatial structures. Journal of Tongji University, 2003 mehr…
  • Zornoza,J.; Encinar,J.; Frantz,M.; Datashvili,L.; Baier,H.; Sierra-Castaner,M.; Caballero,P.; Besada,J.: Experimental Demonstration of Contoured Beam Reflectarrays for Satellite Applications. INICA - International ITG Conference on Antennas, 2003 mehr…
  • Zäh, M.; Müller, S.; Lindemann, U.; Stricker, H.: Intergrierte Montagesystemplanung. (wt-online), 2003, mehr…

2002

  • Amft, Michael: Phasenübergreifende bidirektionale Integration von Gestaltung und Berechnung. Dissertation, 2002 mehr…
  • Antonelli, V.: New developments in the design of guard-rails. Leonardo Times, 2002, pp. 14-17 mehr…
  • Antonelli, V.; Kuilen, J.-W.G. van de; Pauw, I.: The Development of a Timber Guardrail for Highways. WCTE, 2002 mehr…
  • Antonelli, V.; Labordus, M.; Nederveen, P.: Composite End-Closures for an Authonomous Underwater Vehicle, Design and Manufacturing. SAMPE Europe, 2002 mehr…
  • Baier,H.: Integration multidisziplinärer Gestaltung und Berechnung beim mechanisch-thermischen Entwurf werkstoffhybrider Bauteile – Abschlußbericht DFG Projekt Ba 570/2: SPP 732 - Innovative rechnerunterstützte Konstruktionsprozesse: Intergration von Gestaltung und Berechnung. DFG, 2002, mehr…
  • Baier,H.; Datashvili,L.; Müller,M.: Concepts and technologies for precision unfurlable reflectors. 25th ESA Antenna Workshop on Satellite Antenna Technology, 2002 mehr…
  • Baier,H.; Datashvili,L.; Müller,M.: Towards high prescision unfurlables. European Conference on spacecraft structures materials and mechanical testing, 2002 mehr…
  • Baier,H.; Müller,M.: SMI - a structural dynamics toolbox for integrated modeling. TUM, 2002, mehr…
  • Baier,H.; Müller,M.; Wilhelm,R.; Koehler,B.: Integrated Modeling for the VLTI. Integrated Modeling for the VLTI, Astronomical Telescopes and Instrumentation: power telescopes and instrumentation into the New Millenium, 2002 mehr…
  • Ernst, E. E.: Sinnvolle Integration - Integrierte Produktpolitik (IPP). Wirtschaft - Das IHK-Magazin für München und Oberbayern Nr.58/02, 2002, 49-52 mehr…
  • Fuchs, D.K.; Gramann, J.; Lindemann, U.: Generation of Product Concepts in collaborative Environment. Sixth Biennial World Conference on Integrated Design and Process Technology (IDPT-2002), Society for Design and Process Science (SDPS), 200223.-28.06.2002 mehr…
  • Fuchs, D.K.; Lindemann, U.; Jokele, B.; Anderl, R.; Kleiner, S.; Fadel, G.; Greenstein, J.: Sensitization to the Distributed Development Process. 4th Tools and Methods of Competitive Engineering, Huazhong University of Science and Technology Press, 200222.-26.04.2002, 601-612 mehr…
  • Gerst, Manuel: Strategische Produktentscheidungen in der integrierten Produktentwicklung. Dissertation, 2002 mehr…
  • Grienitz, V.; Bätzel, D.; Braun, T.: Mit strategischen Erfolgsfaktoren die Zukunft des Unternehmens sichern. VDMA Nachrichten Nr.09/02, 2002, 52-53 mehr…
  • Hutterer, P.: IPP - Eine Chance für kleine und mittelständische Unternehmen? IFAT 2002, 200213.-17.05.2002 mehr…
  • Hutterer, P.; Lindemann, U.: Auf die Praxis abgestimmt. MüllMagazin Nr.15/02 (2), 2002, 15-17 mehr…
  • Jarratt, T.; Eckert, C.; Schwankl, L.: Product Architecture and the Propagation of Engineering Change. 7th International Design Conference-DESIGN 2002, Sveucilisna tiskara, 200214.-17.05.2002, 75-80 mehr…
  • Kandels,; Lang,M.; Kandels; Leffer: FE-modeling of phenomenon of fatigue in bridge building by using steel composites. Stahlbau 71/04, 2002 mehr…
  • Langer,H.; Pühlhofer,T.; Baier,H.: An Approach for Shape and Topology Optimization Integrating CAD Parameterization and Evolutionary Algorithms. 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, 2002 mehr…
  • Lindemann, U.: Methoden und Projekte der IPP für KMU. Chancen, Methoden und Nutzen der Integrierten Produktpolitik (IPP) für mein Unternehmen, IPPsilon-Seminar, 200217.10.2002 mehr…
  • Lindemann, U.: CAx - eine Kreativitätsbremse in der Produktentwicklung? Vision Automobil, Tagung Euroforum, 200210.04.2002 mehr…
  • Lindemann, U.: Von der strategischen Produktplanung zum Produkt - ein Beispiel. VDMA-Tagung zum BMBF-Projekt Strategische Produktplanung, 200209.04.2002 mehr…
  • Lindemann, U.: Produkte im Wettbewerb - Potenziale aus Konstruktion / Entwicklung. Chancen und Nutzen der Integrierten Produktpolitik (IPP) für die Wirtschaft, 200203.12.2002 mehr…
  • Lindemann, U.: Bidirektionale Integration von Berechnung und Gestaltung: Unschärfen in der Schnittstelle. Integration von Berechnung und Gestaltung, Tagung der DFG, 200214.-15.03.2002 mehr…
  • Lindemann, U.: Efficiency and Effectiveness of Working Methods. Internationale QFD-Tagung, 200204.-05.09.2002 mehr…
  • Lindemann, U.: Flexible Adaption of Methods within the Design Process. 7th International Design Conference DESIGN 2002, Sveucilisna tiskara, 200214.-17.05.2002, 81-86 mehr…
  • Lindemann, U.; Baumberger, Chr.; Fuchs, D.K.; Jokele, B.; Schumann, F.J: Evaluation Of Enterprise´s Innovation Activity. Design for X. Beiträge zum 13. Symposium, Friedrich-Alexander-Universität Erlangen-Nürnberg, Lehrstuhl für Konstruktionstechnik, 200210.-11.10.2002, 131-138 mehr…
  • Lindemann, U.; Hutterer, P.; Heßling, T.; Mörtl, M.: Methods for environmental, sustainable development based on experience with companies. Recovery, Recycling, Re-integration, 6th World Congress on Integrated Resources Management, 200212.-15.02.2002 mehr…
  • Lindemann, U.; Mörtl, M.: Optimierung der Produktlebensdauer zur nachhaltigen Abfallreduzierung. Abschlussbericht für das BayFORREST-Forschungsvorhaben F205 (Laufzeit 11/1999-12/2001). TU, Lehrstuhl für Produktentwicklung, 2002 mehr…
  • Lindemann, U.; Mörtl, M.; Heßling, T.; Hutterer, P.: The guideline "Design for Upgrading" - A medium (incl. processes, methods, resources) to extend the usage phase. 9th CIRP International Seminar on Life Cycle Engineering 'IPP-chance and challenge', Meisenbach, 200209.-10.04.2002, 159-168 mehr…
  • Lindemann, U.; Mörtl, M.; Heßling, T; Hutterer, P.: The Guideline 'Design for Upgrading' as a Medium for Sustainable DESIGN. 7th International Design Conference DESIGN 2002, Sveucilisna tiskara, 2002, 1331-1338 mehr…
  • Lindemann, U.; Pulm, U.; Stetter, R.: Effective Strategies for Distributed Product Development. Sixth Biennial World Conference on Integrated Design and Process Technology (IDPT-2002), Society for Design and Process Science (SDPS), 200223.-28.06.2002 mehr…
  • Lindemann, U.; Wulf, J.: Produktentwicklung im Team als „politischer Prozess“. 47. internationales wissenschaftliches Kolloquium  , TU, 200223.-26.09.2002, 7 Seiten (CD-ROM) mehr…
  • Lindemann, U.; Zäh, M.; Gahr, A.; Pulm, U.; Ulrich, C.; Wagner, W.: Massenproduktion mit Losgröße 1. ZWF Nr.05/97 (5), 2002, 269-273 mehr…
  • Mörtl, Markus Alexander: Entwicklungsmanagement für langlebige, upgradinggerechte Produkte. Dissertation, 2002 mehr…
  • Müller,M.; Baier,H.; Langer,H.; Helwig,G.; Wilhelm,R.: Structure-control-optics interaction and probabilistic analysis tools for high prescision telescopes and mirrors. European Conference on spacecraft structures materials and mechanical testing, 2002 mehr…
  • Pronk, M.; Kuilen, G.-W.G van de; Antonelli, V.: An Advanced Non-Linear Material Model for Timber. WCTE, 2002 mehr…
  • Pulm, U.; Lindemann, U.: Towards a flexible and adequate Use of Methods in Product Development. 7th International Design Conference DESIGN 2002, Sveucilisna tiskara, 200214.-17.05.2002, 229-234 mehr…
  • Pühlhofer,T.; Gleichmar,R.; Langer,H.; Müller,M.; Müller,U.; Baier,H.: Multidisciplinary Optimization and Statistical Evaluations of Structures and Electro-Mechanical Components with ANSYS on a PC-Cluster. 20th CAD-FEM Users Meeting, 2002 mehr…
  • Rath, S.; Mörtl, M.; Aichhorn, C: Recyclinggerechte Produktgestaltung - Probekörperversuche zur Eigenschaftsfrüherkennung für E&K. Konstruktion Nr.54/02 (5), 2002, 53-57 mehr…
  • Schwankl, L.; Lindemann, U.: Dokumentation in der frühen Phase der Produktentwicklung. Konstruktion Nr.03/02, 2002, 83-85 mehr…
  • Schwankl, L.; Pichler, B.; Ziegler, S.: Ein PET für die Nuklearmedizin. TUM Mitteilungen Nr.03/02, 2002, 49-50 mehr…
  • Schwankl, Ludwig: Analyse und Dokumentation in den frühen Phasen der Produktentwicklung. Dissertation, 2002 mehr…
  • Wilhelm,R.; Baier,H.; Müller,M.; Köhler,B.; Johann,U.; Kersten,M.; Koch,F.; Schwarz,R.: Integrated modeling for stellar interferometry -motivation. TUM, 2002, mehr…
  • Wulf, Joachim Erich: Elementarmethoden zur Lösungssuche. Dissertation, 2002 mehr…

2001

  • Amft, M.; Dyla, A.; Höhn, B.R.; Lindemann, U.: Bidirektionale Integration von Berechnung und Gestaltung. Konstruktion Nr.53/01 (10), 2001, 77-81 mehr…
  • Antonelli, V.: Feasibility Study on the Production of a Composite Helical Spring. TU Delft, Society of Manufacturing Engineers (Dearborn, MI) , 2001, mehr…
  • Antonelli, V.; Tooren, MJL van: Design of Composite Pressure Hull End-Closures. Sampe Journal, 2001 mehr…
  • Baier,H.; Datashvili,L.: Building blocks of large deployable precision membrane reflectors. Proceedings of the 42nd AIAA/ASME Structures, Structural Dynamics and Materials Conference, 2001 mehr…
  • Baier,H.; Haberle,T.; Raffaelli,L.: Thermo-mechanics of cryogenic hybrid fiber composite materials and structures. Proceedings of the 3rd European Conference on Launcher Technology, 2001 mehr…
  • Baier,H.; Hagood IV,N.W.; Müller,U.: Feasibility study on conductive polymers as matrix materials in active fiber composites. DGLR-Jahrbuch 2001, DGLR-Jahrestagung, 2001 mehr…
  • Baier,H.; Langer,H.; Langer,H.; Pühlhofer,T.: A grain parallelized structural MDO engine which includes shape and topology variables. CEAS Conference on Multidisciplinary Aircraft Design and Optimization, 2001 mehr…
  • Baier,H.; Müller,M.: Entwurfsmethoden und Konzepte für höchstgenaue mechatronische Strukturen und Bauteile: Die SMI-Toolbox. Proceedings VDI-Konferenz Mechatronik, 2001 mehr…
  • Bender, Beate: Zielorientiertes Kooperationsmanagement in der Produktentwicklung. Dissertation, 2001 mehr…
  • Birkhofer, H.; Lindemann, U.; Albers, A.; Meier, M.: Product development as a structured and interactive network of knowledge-a revolutionary approach. 13th International Conference on Engineering Design ICED'01, I Mech E, 200121.-23.08.2001, 457-464 mehr…
  • Blumhardt, R.: Numerische Optimierung des Crashverhaltens von Fahrzeug-Strukturen und -komponenten. Dissertation, 2001 mehr…
  • Boeckh, M.: Auf die Handskizze können Konstrukteure nicht verzichten: CAD-Systeme unterstützen die Frühphase der Produktentwicklung nur unzureichend (Untersuchung des Lehrstuhls für Produktentwicklung der TU München). vdi-nachrichten (12), 2001, 29 mehr…
  • Collin, Heinrich: Management von Produkt-Informationen in kleinen und mittelständischen Unternehmen. Dissertation, 2001 mehr…
  • Crone, J.; Dietrich, K.H.; Dorn, Th.; Mörtl, M.; Rath, S.: ProMeKreis-Konstruktionsleitfaden: Ein Hilfsmittel für die recyclinggerechte Produktentwicklung. Konstruktion Nr.53/01 (6), 2001, 56-57 mehr…
  • Gaul, Hans-Dieter: Verteilte Produktentwicklung – Perspektiven und Modell zur Optimierung. Dissertation, 2001 mehr…
  • Gerst, M.; Eckert, C.; Clarkson, J.; Lindemann, U.: Innovation in the tension of change and reuse. 13th International Conference on Engineering Design ICED'01, I Mech E, 200121.-23.08.2001, 371-378 mehr…
  • Gerst, M.; Gierhardt, H.; Braun, T.: User oriented definition of product requirements within mechatronic engineering. Human Friendly Mechatronics. Selected Papers of the Intern. Conf. on Machine Automation, ICMA 2000, Elsevier Science B.V., 200125.-27.09.2000, 365-370 mehr…
  • Gierhardt, Heiko: Global verteilte Produktentwicklungsprojekte – Ein Vorgehensmodell auf der operativen Ebene. Dissertation, 2001 mehr…
  • Haberle, Till: Thermomechanik werkstoffhybrider, faserverst¨arkter Schichtverbunde und Bauteile bei tiefen Temperaturen. Dissertation, 2001 mehr…
  • Heiserer,D.; Baier,H.: Applied reanalysis techniques for large scale structural mechanical optimization problems. Proceedings of 5th International Conference on Structural and Multidisciplinary Optimization, Kluiver Publ. Comp, 2001 mehr…
  • Humele, H.: Nachhaltige Produktentwicklung - Krones beteiligt sich an Projekt zur Integrierten Produktpolitik (Projektleitung: Lehrstuhl für Produktentwicklung, TUM). Krones Magazin (2), 2001, 98 mehr…
  • Lindemann, U.: Methoden in der Produktentwicklung. Konstruktion Nr.53/01 (1/2), 2001, 3 mehr…
  • Lindemann, U.: Processes Key to Change Management Success. Allianz Global Risk Report (2), 2001, 19-21 mehr…
  • Lindemann, U.: Product innovation on demand - fiction or truth? 13th International Conference on Engineering Design ICED'01, I Mech E, 200121.-23.08.2001, 347-354 mehr…
  • Lindemann, U.; Demers, M.; Gerst, M.; Wulf, J.: Lösungssuche mit Hilfe von Zielformulierungen. Konstruktion Nr.53/01 (3), 2001, 92-97 mehr…
  • Lindemann, U.; Gerst, M.: Strategische Planung in der Produktentwicklung. ZWF Nr.96/01 (7-8), 2001, 361-364 mehr…
  • Lindemann, U.; Heßling, T.; Hutterer, P.; Mörtl, M.: Applicable Methods for Sustainable Development for Small and Middle-Class Companies. 2nd Intern. Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2001), Printing House, 200111.-15.12.2001, 180-183 mehr…
  • Lindemann, U.; Hutterer, P.; Heßling, T.; Mörtl, M.: Nachhaltige Produktgestaltung in KMU anhand konkreter Praxisbeispiele. 2. Symposium Kreislaufwirtschaft von A-Z, 200117.11.2001, 5 Seiten mehr…
  • Lindemann, U.; Hutterer, P.; Heßling, T.; Mörtl, M.: IPP - eine Sicht aus der Wissenschaft. Integrierte Produktpolitik-Dokumentation IPPsilon-Kongress, BStMLU, 200110.12.2001, 2 Seiten mehr…
  • Lindemann, U.; Jung, C.; Schwankl, L.: Montagegerechte Gestaltung eines Niederhub Sicherheitsventils. ZWF Nr.96/01 (7-8), 2001, 373-377 mehr…
  • Lindemann, U.; Mörtl, M.: BayFORREST-Forschungsvorhaben F205: Optimierung der Produktlebensdauer zur nachhaltigen Abfallreduzierung. BayFORREST Statusbericht 2001. Eigenverlag, 2001 mehr…
  • Lindemann, U.; Mörtl, M.: Ganzheitliche Methodik zur umweltgerechten Produktentwicklung. Konstruktion Nr.53/01 (12), 2001, 64-67 mehr…
  • Lindemann, U.; Pulm, U.: Enhanced Product Structuring and Evaluation of Product Properties for Mass Customization. MCP’01, World Congress on Mass Customization and Personalization, 200101.-02.10.2001, 10 pages (CD-ROM) mehr…
  • Lindemann, U.; Pulm, U.: Modellierung und Eigenschaftsabsicherung von Produktspektren für Mass Customization. Variantenvielfalt in Produkten und Prozessen, VDI, 200107.-08.11.2001, 325-339 mehr…
  • Lindemann, U.; Stetter, R.; Viertlböck, M.: A Pragmatic Approach for Supporting Integrated Product Development. Transactions of the SDPS Nr.05/01 (2), 2001, 39-51 mehr…
  • Lindemann, U.; Stricker, H.; Gramann, J.; Pulm, U.: Kosteneinsparungen in Wertanalyseprozessen - Eine Systematik zur Wirkungskontrolle. ZWF Nr.96/01 (10), 2001, 543-546 mehr…
  • Lindemann, U.; Wulf, J.: Action orientation in design methodology. 13th International Conference on Engineering Design ICED'01, I Mech E, 200121.-23.08.2001, 131-138 mehr…
  • Locatelli, G.: Piezo-actuated adaptive structures for vibration damping and shape control - modeling and testing. Dissertation, 2001 mehr…
  • Pache, M.; Lindemann, U.; Römer, A.; Hacker, W.: Skizzieren mit dem CAD-System? CAD-CAM Report Nr.20/01 (3), 2001, 98-103 mehr…
  • Pache, M.; Römer, A.; Lindemann, U.; Hacker, W.: Re-interpretation of Conceptual Design Sketches in Mechanical Engineering. DETC’01, ASME 2001 Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 200109.-12.09.2001, 7 pages (CD-ROM) mehr…
  • Pache, M.; Römer, A.; Lindemann, U.; Hacker, W.: Sketching behaviour and creativity in conceptual engineering design. 13th International Conference on Engineering Design ICED'01, I Mech E, 200121.-23.08.2001, 461-468 mehr…
  • Pulm, U.; Lindemann, U.: Enhanced systematics for functional product structuring. 13th International Conference on Engineering Design ICED'01, I Mech E, 200121.-23.08.2001, 477-484 mehr…
  • Pulm, U.; Lindemann, U.: Mechanical Engineering as a Basis for Interdisciplinary Education. Workshop on Transdisciplinary Education, Research and Training, Society for Design and Process Science (SDPS), 200110.-13.06.2001, 44-51 mehr…
  • Rath, S.; Mörtl, M.; Aichhorn, C.: Aufschlussgerechte Gestaltungsmöglichkeiten für Schraubverbindungen. wt Werkstattstechnik online Nr.91/01 (6), 2001, 367-372 mehr…
  • Reischl, Christian: Simulation von Produktkosten in der Entwicklungsphase. Dissertation, 2001 mehr…
  • Renner, I.; Schweitzer, M.: BayFORREST-Forschungsvorhaben F205: Optimierung der Produktlebensdauer zur nachhaltigen Abfallreduzierung. In: Wilderer,  P. A.; Wimmer,  M. C. (Hrsg.) (Hrsg.): BayFORREST Statusbericht 2001. Eigenverlag, 2001, 17 Seiten (CD-ROM) mehr…
  • Renner, I.; Schweitzer, M.: LEAD-Führungskompetenz 2001. TUM Mitteilungen (1), 2001, 23 mehr…
  • Römer, A.; Weißhahn, G.; Hacker, W.; Pache, M.: Aufwandsarmes Modellieren im Konstruktionsprozess - Ergebnisse einer Fragebogenstudie. Zeitschrift für Arbeits- und Organisationspsychologie Nr.45/01 (3), 2001, 113-123 mehr…
  • Römer, A.; Weißhahn, G.; Hacker, W; Pache, M.; Lindemann, U.: Effort-Saving Product Representations in Design - Results of a Questionnaire Survey. Design Studies Nr.22/01 (6), 2001, 473-491 mehr…
  • Schwankl, L.: 'PE-Auto' made by TUM. TUM Mitteilungen (4), 2001, 27 mehr…
  • Schwankl, L.: Documentation and evaluation in early stages of the product development process. 13th International Conference on Engineering Design ICED'01, I Mech E, 200121.-23.08.2001, 235-242 mehr…
  • Schwankl, L.; Pichler, B.; Ziegler, S.; Bernecker, F.; Hanschke, M.: Interdisziplinäre Entwicklung komplexer mechatronischer Produkte - am Beispiel medizintechnischer Anwendungen. 4. VDI Mechatronik Tagung 2001 - Innovative Produktentwicklungen, VDI EKV, 200112.-13.09.2001 mehr…
  • Stetter, R.; Aßmann, G.; Viertlböck, M.: Functional product modelling-new methods for the generation of product functions. 13th International Conference on Engineering Design ICED'01, I Mech E, 200121.-23.08.2001, 493-500 mehr…
  • Stetter, R.; Spindler, K.: Eigenschaftsfrüherkennung bei der Entwicklung von Abgasanlagen. MTZ Motortechnische Zeitschrift Nr.62/01 (5), 2001, 390-396 mehr…
  • WLB: Neues im Netz: Kurzbericht über den 'Leitfaden zur recyclinggerechten Produktentwicklung'. WLB (9), 2001, 10 mehr…

2000

  • Allmansberger, Hans-Günter: Erweiterung der Konstruktionsmethodik zur Unterstützung von Änderungsprozessen in der Produktentwicklung. Dissertation, 2000 mehr…
  • Antonelli, V.: Feasibility Study in the Production of a Composite Helical Spring. SAMPE Europe, 2000 mehr…
  • Aßmann, G.; Stetter, R.: Flexible Processes for Technical Changes - The Integrated Engineering Change Management. Integrated Design Process Technology. Proc. of the 5th World Conference on Integrated Design and Process Technology, Society for Design and Process Science (SDPS), 200005.-08.06.2000, (CD-ROM) mehr…
  • Aßmann, Gert: Gestaltung von Änderungsprozessen in der Produktentwicklung. Dissertation, 2000 mehr…
  • Baier,H.: Potential and limits of using modal structural data for health monitoring. Proceedings of the International Conference on Aircraft Monitoring Systems, 2000, pp. 77-81 mehr…
  • Baier,H.; Datashvili,L.; Gogava,Z.; Medzmarashvili,E.; Montuor,V.: Building blocks of advanced large stowable precision membrane reflectors. Proceeding of the European Conference on spacecraft structures, materials and mechanical testing, 2000 mehr…
  • Baier,H.; Datashvili,L.; Montuori,V.: Neue Konzepte und Technologien großer entfaltbarer Weltraumreflektoren. DGLR-Jahrbuch 2000 Band I und Band II, 2000IT 2000-113, DGLR-Jahrestagung mehr…
  • Baier,H.; Eckart,P.: Space and spacecraft related research and technology activities at the Aerospace Department of TU München. ESA conference on Academic and Industrial Cooperation in Space, 2000ESA-SP 470, pp. 111 - 118 mehr…
  • Baier,H.; Haberle,T.: High precision fibre composits and hybrid materials at cryogenic temperatures. Materials Week, 2000 mehr…
  • Baier,H.; Locatelli,G.: Microvibration control in telescope structures. Proceedings of the SPIE Conference on Astronomical Telescopes and Instrumentation 2000, 2000 mehr…
  • Bender, K.; Lindemann, U.; Reichwald, R.; Reinhart, G.; Aßmann, G.; Cuiper, R.; Fischer, F.; Pulm, U.; Seiffert, K.J.; Viertlböck, M.; Zanner, S.: Standortintegration: Management von integrierten Entwicklungs-und Änderungsprozessen bei verteilten Standorten. In: Lindemann, U. (Hrsg.): SFB 336. Montageautomatisierung durch Integration von Konstruktion und Planung. Arbeits-und Ergebnisbericht 1998-1999-2000. TU, 2000, 57-76 mehr…
  • Bender, K.; Lindemann, U.; Reichwald, R.; Reinhart, G.; Aßmann, G.; Cuiper, R.; Fischer, F.; Pulm, U.; Seiffert, K.J.; Viertlböck, M.; Zanner, S.: Offene Systemarchitektur zur Unterstützung integrierter Engineering-Prozesse. SFB 336. Montageautomatisierung durch Integration von Konstruktion und Planung. Arbeits-und Ergebnisbericht 1998-1999-2000. TU, 2000 mehr…
  • Bender, K.; Lindemann, U.; Wirtz, J.; Fischer, F.; Viertlböck, M.: Einführungsstrategien für Engineering-Werkzeuge zur integrierten Produktentwicklung. TFB 2. Montageautomatisierung durch Integration von Konstruktion und Planung. Arbeits-und Ergebnisbericht 1997-2000. TU, 2000 mehr…
  • Bichlmaier, C.: Methoden zur flexiblen Gestaltung von integrierten Entwicklungsprozessen. Dissertation, 2000 mehr…
  • Crone, J; Dietrich, K.H.; Dorn, Th.; Mörtl, M.; Rath, S.: ProMeKreis-Konstruktionsleitfaden - Ein kompaktes Hilfsmittel für die recyclinggerechte Produktentwicklung. Recyclingorientierte Entwicklung technischer Produkte 2000-Management komplexer Zielkonflikte, VDI, 200015.-16.11.2000, 43-49 mehr…
  • Demers, Marc Thomas: Methoden zur dynamischen Planung und Steuerung von Produktentwicklungsprozessen. Dissertation, 2000 mehr…
  • Dietrich, K.H.; Dorn, Th.; Mörtl, M.; Rath, S.: Leitfaden zur recyclinggerechten Produktentwicklung. TU (München) , (Entstanden während des BMBF-Verbundprojektes ProMeKreis (Förderkennzeichen 02PV25050) im Rahmen von Produktion 2000-Wirtschaften in Kreisläufen, Laufzeit 11/96-02/2000), 2000, mehr…
  • Eckart,P.; Angelucci,S.; Appolloni,L.; Baier,H.; Canales,M.; da Silva-Curiel,A.; Freidl,E.; Igenbergs,E.; Kesselmann,M.; Neff,T.; Pauly,K.; Pühlhofer,T.; Schlerka,F.; Seefelder,W.; Tarabini,L.; Straub,A.; Ullmann,S.: Microspacecraft Platform with Bipropellant Propulsion System and 3-Axis Stabilization for Missions in Earth Orbit and Beyond LEO. 14th Annual AIAA / USU Conference on Small Satellites, 2000 mehr…
  • Ehrlenspiel, K.: Die Bedeutung der Denk- bzw. Informations-Ökonomie für die Konstruktionspraxis und die Lehre. Bayrische Konstruktionstagung 2000, 200010.-11.11.2000 mehr…
  • Ehrlenspiel, K.: The importance of the 'mental-and information-economy' for design and design-teaching. EDIPro'2000, 200012.-14.10.2000 mehr…
  • Ernzer, M.; Stetter, R.: Application of the Product Development Methodology in Industry. 5th Intern. Congress of Project Engineering, Universitat de Lleida, 200004.-06.10.2000, (CD-ROM) mehr…
  • Fuchs, D.K.; Pulm, U.: Tutorensystem Garching. TUM Mitteilungen (1), 2000, 21 mehr…
  • Gausemeier, J.; Lindemann, U.; Reinhart, G.; Wiendahl, H.-P.: Kooperatives Produktengineering: Ein neues Selbstverständnis des ingenieurmäßigen Wirkens. HNI-Verlagsschriftenreihe, Bd. 79. Heinz Nixdorf Institut, 2000 mehr…
  • Gerst, M.; Gierhardt, H.; Braun, T.: User oriented definition of product requirements within mechatronic engineering. Human Friendly Mechatronics. Proc. of the Intern. Conf. on Machine Automation, Elsevier Science B.V., 200025.-27.09.2000, 91-97 mehr…
  • Gerst, M.; Seidemann, H.; Kanitz, F.: Kooperatives Produktengineering. ZWF Nr.94/00 (6/7), 2000, 369-372 mehr…
  • Haberle,T.; Baier,H.: Messen von kleinen Verformungen an CFK-Proben bei Tieftemperatur. DGLR-Jahrestagung 2000, 2000 mehr…
  • Lindemann, U.: Einführungsstrategien für Engineering-Werkzeuge zur integrierten Produktentwicklung. In: Lindemann, U. (Hrsg.): TFB 2. Montageautomatisierung durch Integration von Konstruktion und Planung. Arbeits-und Ergebnisbericht 1997-2000. TU, 2000, 79-128 mehr…
  • Lindemann, U.: Von der Störung zur Chance: Änderungsmanagement ist mehr als nur Fehlerbehebung. Allianz Report (5), 2000, 300-305 mehr…
  • Lindemann, U.; Amft, M.: Rechnergestützte Integration von Gestaltung und Berechnung im Konstruktionsprozess. Konstruktion Nr.52/00 (10), 2000, 78-82 mehr…
  • Lindemann, U.; Anderl, R.; Fadel, G.; Greenstein, J.; Gierhardt, H.; Fuchs, D.K.; Gaul, H.D.; Ott, T.: 24h-Entwicklung - Ein Grundlagenprojekt in der Antriebsentwicklung. Entwicklung im Karosseriebau, VDI, 200011.-12.05.2000, 283-299 mehr…
  • Lindemann, U.; Anderl, R.; Gierhardt, H.; Fadel, G.: '24hr Design and Development' - An Engine Design Project. Collaborative Design. CoDesign 2000, Springer, 200011.-13.09.2000, 193-201 mehr…
  • Lindemann, U.; Bender, K.; Heinzl, J.; Reichwald, R.; Reinhart, G.; Amft, M.; Bichlmaier, C.; Cuiper, R.; v. Praun, S.; Reicheneder, J.; Seiffert, K.J.; Stetter, R.; Zanner, S.: SFB 336. Montageautomatisierung durch Integration von Konstruktion und Planung. Arbeits- und Ergebnisbericht 1998-1999-2000. TU, 2000 mehr…
  • Lindemann, U.; Bender, K.; Heinzl, J.; Reinhart, G.; Reichwald, R.; Amft, M.; Bichlmaier, C.; Cuiper, R.; v. Praun, S.; Reicheneder, J.; Seiffert, K.J.; Stetter, R.; Zanner, S.: Erarbeitung der Elemente und Struktur für einen integrierten Entwicklungsprozess von Produkt und Montageanlage. SFB 336. Montageautomatisierung durch Integration von Konstruktion und Planung. Arbeits-und Ergebnisbericht 1998-1999-2000. TU, 2000 mehr…
  • Lindemann, U.; Bätzel, D.; Gerst, M.; Orlik, L.: Die Vordringliche Aktion Kooperatives Produktengineering. Auf dem Weg zu den Produkten für die Märkte von morgen. 4. Intern. Heinz-Nixdorf-Symposium, Heinz Nixdorf Institut, 200007.-08.12.2000, 61-74 mehr…
  • Lindemann, U.; Freyer, B.: Standardisierung bei Anpassungs- und Variantenkonstruktionen. Design for X. Beiträge zum 11. Symposium, Friedrich-Alexander-Universität Erlangen-Nürnberg, Lehrstuhl für Konstruktionstechnik, 200012.-13.10.2000, 120-125 mehr…
  • Lindemann, U.; Fuchs, D.K.; Gaul, H.D.: House of Communication - Ein Kommunikationsmodell im globalen Umfeld. ZWF Nr.95/00 (7-8), 2000, 366-368 mehr…
  • Lindemann, U.; Glander, M.; Grunwald, S.; Reicheneder, J.; Stetter, R.; Zanner, S.: Flexible Integration von Produktentwicklung und Montageplanung. Industrie Management Nr.16/00 (1), 2000, 23-27 mehr…
  • Lindemann, U.; Heinzl, J.; Reichwald, R.; Reinhart, G.; Dürrschmidt, S.; Jäger, S.; Schiegg, H.; Stetter, R.; Viertlböck, M.: TFB 2. Montageautomatisierung durch Integration von Konstruktion und Planung. Arbeits- und Ergebnisbericht 1997-2000. TU, 2000 mehr…
  • Lindemann, U.; Heinzl, J.; Reichwald, R.; Reinhart, G.; Dürrschmidt, S.; Jäger, S.; Schiegg, H.; Stetter, R.; Viertlböck, M.: Methodische Unterstützung der Integrierten Produktentwicklung. TFB 2. Montageautomatisierung durch Integration von Konstruktion und Planung. Arbeits-und Ergebnisbericht 1997-2000. TU, 2000 mehr…
  • Lindemann, U.; Mörtl, M.: BayFORREST-Forschungsvorhaben F205: Optimierung der Produktlebensdauer zur nachhaltigen Abfallreduzierung. In: Wilderer,  P. A.; Wimmer,  M. C. (Hrsg.): BayFORREST Statusbericht 2000. Hieronymus, 2000, 69-81 mehr…
  • Lindemann, U.; Mörtl, M.; Rath, S.: A Design Methodology for the Recycling of simple and complex Products. R'2000-Recovery, Recycling, Re-integration, 5th World Congress on Integrated Resources Management and Envirotech Trade Show, PEAK Ltd., 200005.-09.06.2000, (CD-ROM) mehr…
  • Lindemann, U.; Reinhart, G.; Gaul, H.D.; Meinlschmidt, J.: Methodische und rechnertechnische Umsetzung der integrierten Produkt- und Produktionsmittelkonstruktion. SFB 336. Montageautomatisierung durch Integration von Konstruktion und Planung. Arbeits-und Ergebnisbericht 1998-1999-2000. TU, 2000 mehr…
  • Lindemann, U.; Schlüter, A.; Schwankl, L.: Innovation - Zufall oder zielgerichtete Kreativität? Der kreative Konstrukteur-Freiräume schaffen für Produkt-und Prozessentwicklungen. 4. Deutscher Konstrukteurstag, VDI, 200006.-07.09.2000 mehr…
  • Lindemann, U.; Stetter, R.; Viertlböck, M.: A Pragmatic Approach for Supporting Integrated Product Development. Integrated Design Process Technology. Proc. of the 4th World Conference on Integrated Design and Process Technology (IDPT), Society for Design and Process Science (SDPS), 200005.-08.06.2000, (CD-ROM) mehr…
  • Lindemann, U.; Wulf, J.: Technological Lock-In in Mechatronic Engineering and Ways of overcoming it. 5th World Conference on Integrated Design and Process Technology (IDPT 2000), Society for Design and Process Science (SDPS), 200004.-08.06.2000, 7 pages (CD-ROM) mehr…
  • Locatelli,G.; Langer,H.; Müller,M.; Baier,H.: Simultaneous optimization of actuator placement and structural parameters by mathematical and genetic optimization algorithms. Proceedings of the IUTAM Conference Smart Structures and Structronic Systems, Kluwer ed., 2000 mehr…
  • Pache, M.; Lindemann, U.; Römer, A.; Hacker, W.: The use of sketches, physical models and CAD in early stages of the engineering design process. 5th World Conference on Integrated Design and Process Technology (IDPT 2000), Society for Design and Process Science (SDPS), 200004.-08.06.2000, 9 pages (CD-ROM) mehr…
  • Pichler, B.; Bernecker, G.; Böning, G.; Rafecas, M.; Pimpl, W.; Schwaiger, M.; Lorenz, E.; Ziegler, S.: A 32-Channel LSO Matrix Coupled to a Monolithic 4x8 APD Array for High Resolution PET. IEEE Nuclear Science Symposium & Medical Imaging Conference, IEEE Trans. Nucl. Sci., 2000 mehr…
  • Pühlhofer,T.; Baier,H.; Langer,H.: Vom Werkstoff zum Bauteil - die Prozesskette bei der Optimierung werkstoffhybrider Faserverbundbauteile. 18. Internationale FEM-Technologietage, 2000 mehr…
  • Reinhart, G.; Bender, K.; Lindemann, U.; Reichwald, R.; Amft, M.; Bichlmaier, C.; Grunwald, S.; Lulay, W.; Murr, O.; Prinz, O.; Schmalzl, B.; Seiffert, K.J.; Stetter, R.; Zanner, S.: Erarbeitung der Elemente und Struktur für einen integrierten Entwicklungsprozess von Produkt und Montageanlage. In: Lindemann, U. (Hrsg.): SFB 336. Montageautomatisierung durch Integration von Konstruktion und Planung. Arbeits-und Ergebnisbericht 1998-1999-2000. TU, 2000, 17-36 mehr…
  • Reinhart, G.; Bender, K.; Lindemann, U.; Reichwald, R.; Amft, M.; Bichlmaier, C.; Seiffert, K.J.; Grunwald, S.; Lulay, W.; Murr, O.; Prinz, O.; Schmalzl, B.; Stetter, R.; Zanner, S.: Methoden und Werkzeuge zur Konfiguration und Steuerung integrierter Entwicklungsprozesse von Produkt und Montageanlage. SFB 336. Montageautomatisierung durch Integration von Konstruktion und Planung. Arbeits-und Ergebnisbericht 1998-1999-2000. TU, 2000 mehr…
  • Reinhart, G.; Glander, M.; Grunwald, S.; Reicheneder, J.; Stetter, R.; Zanner, S.: Flexible Produktentwicklung und Montageplanung mit integrierten Prozessbausteinen. ZWF Nr.95/00  (1-2), 2000, 19-22 mehr…
  • Schoen, Stefan: Gestaltung und Unterstützung von Communities of Practice. Dissertation, 2000 mehr…
  • Schwankl, L.: Development Process of Innovative Brake Systems. Design Conference 2000. Proc. of the 6th Intern. Design Conference, 200023.-26.05.2000, 693-698 mehr…
  • Schwankl, L.: Konzeptionelle Entwicklung innovativer Bremssysteme. Mechatronik-Mechanisch/Elektrische Antriebstechnik, VDI EKV, 200029.-30.03.2000, 109-126 mehr…
  • Schwankl, L.; Pache, M.: Das Tutorensystem Garching an der Fakultät für Maschinenwesen der TU München - Neue Ansätze im Bereich der Ingenieursausbildung. In: Knauf,  H.; Schmithals,  F. (Hrsg.): Tutorenhandbuch: Einführung in die Tutorenarbeit. Luchterhand, 2000, 214-217 mehr…
  • Schwankl, L.; Pache, M.: Collaboration between University and Industry in Engineering Design. Adjunct Proc. of Collaborative Design. CoDesign 2000, Univ., 200011.-13.09.2000, 185-190 mehr…
  • Schwankl, L.; Wulf, J.: Kooperation mit Industrie trägt Früchte. TUM Mitteilungen (5), 2000, 28 mehr…
  • Stetter, R.: Methodische Unterstützung von Analysen in der Produktentwicklung. Der virtuelle Entwicklungsprozess im Automobil, Haus der Technik, 200011.-12.04.2000, 12-1 - 12-9 mehr…
  • Stetter, Ralf: Method Implementation in Integrated Product Development. Dissertation, 2000 mehr…
  • Tsouvalis, N.; Zafeiratou, A.; Papazoglou, V.; Stevenson, P.; Antonelli, V.; Nederveen, P.J.: Transition Ring Design for an Autonomous Underwater Vehicle. IASS-IACM, 2000 mehr…
  • Viertlböck, Markus: Modell der Methoden- und Hilfsmitteleinführung im Bereich der Produktentwicklung. Dissertation, 2000 mehr…
  • Weißhahn, G.; Pache, M.; Hacker, W.; Lindemann, U.; Römer, A.: Unterstützungsmöglichkeiten des konstruktiven Entwicklungsprozesses. Konstruktion Nr.52/00 (7/8), 2000, 61-66 mehr…
  • Wulf, J.; Schuller, J.: Entwicklungsmethodik für mechatronische Karosseriesysteme. Mechatronik-Mechanisch/Elektrische Antriebstechnik, VDI EKV, 200029.-30.03.2000, 181-198 mehr…

1999

  • Baier,H.; Döngi,F.: Simulation of Adaptronic Systems. In: H. Janocha (ed): Adoptronics and Smart Structures. Springer Verlag, 1999, pp. 79-98 1999 mehr…
  • Baier,H.; Gleichmar,R.; Langer,H.; Locatelli,G.: Eine Maschine für multidisziplinäre Strukturoptimierung. Proceedings of the Cadfem User Conference, 1999 mehr…
  • Baier,H.; Haberle,T.: Rechnerische und experimentelle Untersuchungen zur Auslegung werkstoffhybrider Faserverbundbauteile bei kryogenen Temperaturen. DGLR-Jahrbuch 1999, 1999DGLR-Jahrestagung mehr…
  • Baier,H.; Locatelli,G.: Optimization of actuator placement and structural parameters in smart structures. Proceedings of the SPIE Conference on Smart Structures and Materials, 1999 mehr…
  • Baier,H.; Locatelli,G.; Calabrese,M.: Analytical and experimental investigations on active and passive damping with PZT devices in lightweight structures. Dynamics and Control of Structures in Space IV, 1999 mehr…
  • Bernard, Rainer: Early Evaluation of Product Properties within the Integrated Product Development. Dissertation, 1999 mehr…
  • Eiletz, R.: Zielkonfliktmanagement bei der Entwicklung komplexer Produkte – am Bsp. PKW-Entwicklung. Dissertation, 1999 mehr…
  • Gleichmar,R.; Baier,H.: Strömungs-Struktur-Kopplung mit iteraktiven und direkten Kopplungsmethoden. Proceedings of the Cadfem User Conference, 1999 mehr…
  • Kaiser, C.: Elastische Kopplungen in aktiven und passiven Laminaten sowie dünnwandigen Faserverbundbalken. Dissertation, 1999 mehr…
  • Kaiser,C.; Baier,H.: Design of Smart Composite Laminates and Thin-Walled Beams. Proceedings of the ICCM-12, 199912th International Conference on Composite Materials mehr…
  • Phleps, Ulrike: Recyclinggerechte Produktdefinition – Methodische Unterstützung für Upgrading und Verwertung. Dissertation, 1999 mehr…
  • Stößer, Robert: Zielkostenmanagement in integrierten Produkterstellungsprozessen. Dissertation, 1999 mehr…
  • Zanker, Winfried: Situative Anpassung und Neukombination von Entwicklungsmethoden. Dissertation, 1999 mehr…

1998

  • Lindemann, U.; Reichwald, R. (Hrsg.): Integriertes Änderungsmanagement. Springer, 1998 mehr…
  • Antonelli, V.; Van Tooren, M. J. L.: The effect of Reinforcements on the Stress Concentration around circular Cut-Outs in Cylindrical Shells for Aeronautical Scope. SAMPE Technical Conference, 1998 mehr…
  • Antonelli, V.; Van Tooren, M.J.L.: Feasiblity Study on the Replacements of Aircraft Window Frames with Composite Ones. International Conference on Advanced Composites, 1998 mehr…
  • Baier,H.: Approximation techniques in Control-Structure-Interaction and Adaptive Structure. ISSMO International Conference, 1998 mehr…
  • Baier,H.: Active Vibration Control for Noise Reduction. Proceedings of the Euromechanics Colloquium "Adaptive Structures", Fortschrittberichte VDI, 1998, pp.1-10 mehr…
  • Baier,H.; Haberle,T.: Cryogenic Composite Structures. Proceedings of the ESA Conference on Spacecraft Structures and Mechanical Testing, 1998 mehr…
  • Baier,H.; Kaiser,C.; Locatelli,G.: Aeroelastic Tailoring of Anisotropic Structures for Passive and Active Displacement Control. Proceedings of the Aeroelastics Conference, 1998DGLR mehr…
  • Biersack, H.: Methode für Krafteinleitungsstellenkonstruktion in Blechstrukturen. Dissertation, 1998 mehr…
  • Günther, J.: Individuelle Einflüsse auf den Konstruktionsprozess. Dissertation, 1998 mehr…
  • Irlinger, Robert: Methoden und Werkzeuge zur nachvollziehbaren Dokumentation in der Produktentwicklung. Dissertation, 1998 mehr…
  • Kaiser,C.; Paracchini,P.V.; Fransescatti,D.: Analysis of Composite Thin-Walled Multi-Celled Beams with Elastic Couplings. ECCM-8, European Conference on Composite Materials, 1998, pp. 173-180 mehr…
  • Kleedörfer, Ralf Werner: Prozess- und Änderungsmanagement der Integrierten Produktentwicklung. Dissertation, 1998 mehr…
  • Steinmeier, E.: Realisierung eines systemtechnischen Produktmodells – Einsatz in der Pkw-Entwicklun. Dissertation, 1998 mehr…

1997

  • Baier,H.: Approaches and technologies for optimal control-structure-interaction in smart structures. C.L. Kirk, D.J. Inman (eds): Dynamics and Control of Structures in Space, Computational Mechanics Publications, 1997 mehr…
  • Baier,H.; et.al.,: Potential nachwachsender Rohstoffe im Leichtbau. Seminar für Leichtbau an der Technischen Universität München, 1997 mehr…
  • Faust,M.; Baier,H.: A State Space Formulation For Coupled Structure-Acoustic Vibrations. Proceedings of the International Conference on Active Noise Control, 1997 mehr…
  • Gleichmar,R.: Bewertung eines neuen Festigkeitskriteriums für Faserverbundlaminate und Integration in ein FE-Programm (TUM-MW 64/9702-TB). Technischer Bericht, Lehrstuhl für Leichtbau, TU München, 1997, mehr…
  • Gleichmar,R.; Kaiser,C.; Rother,K.: Implementation des wirkebenebezogenen Zwischenfaserbruchkriteriums nach Puck in das Finite-Element-Programm ANSYS. Friedrich, K.: Verbundwerkstoffe und Werkstoffverbunde, 1997DGM-Tagung, S. 759-764 mehr…
  • Kaiser,C.; Gleichmar,R.: Dimensionieren von Faserverbundstrukturen mit neuen Bruchkriterien in ANSYS (Vortrag Nr. 2-15). Tagungsband 15. CAD-FEM USERS MEETING, 1997 mehr…
  • Kaiser,C.; Gleichmar,R.: Bewertung des wirkebenebezogenen Zwischenfaserbruchkriteriums nach Puck mit Hilfe der FE-Methode. DGLR-Jahrbuch 1997, 1997DGLR-Jahrestagung, S. 1739-1745 mehr…
  • Last,B.; Baier,H.; Schmidt,Herold.: Hysterese models and linearization in controlled structures. Proceedings of the International Conference on Smart Materials and Structures, 1997 mehr…
  • Schwab,K.; Baier,H.; Schäfer,W.; Stolten,D.: Thermomechanical Analysis of the Joining Process of a Planar Ceramic High-Temperature Fuel Cell System. 5th International Conference Joining Ceramics, Glass and Metal, 1997 mehr…
  • van den Dool,T.; Doelman,N.; Häusler,S.; Baier,H.: Broadband MIMO ANC in an Ariane Fairing Model. Proceedings of the International Conference on Active Noise Control, 1997 mehr…

1996

  • Ambrosy, Stefan: Methoden und Werkzeuge für die integrierte Produktentwicklung. Dissertation, 1996 mehr…
  • Danner, S.: Ganzheitliches Anforderungsmanagement für marktorientierte Entwicklungsprozesse. Dissertation, 1996 mehr…
  • Giapoulis, Anthimos: Modelle für effektive Konstruktionsprozesse. Dissertation, 1996 mehr…
  • Haberle,T.; Mendler,J.: Rechnerische und experimentelle Strukturanalyse eines Sandwichgehäuses für ein Weltraumexperiment. Berechnung von Faserverbundstrukturen unter Anwendung numerischer Verfahren, 1996München, Lehrstuhl für Leichtbau, S. 11-1 - 11-9 mehr…
  • Kaiser,C.: Grundsätzliche Überlegungen zu elastischen Kopplungen allgemein anisotroper Balken. Berechnung von Faserverbundstrukturen unter Anwendung numerischer Verfahren, 1996München, Lehrstuhl für Leichtbau, Seite 5-1 - 5-13 mehr…
  • Kaiser,C.; Francescatti,D.: Theoretical and experimental analysis of composite beams with elastic couplings (ICAS-96-5.4.4). Proceedings of the 20th Congress of the International Council of the Aeronautical Sciences (ICAS), 1996, Seite 968-978 mehr…
  • Katzenschwanz, C.: Spannungen und Verschiebungen in reparierten Scheiben und Platten unter Berücksichtigung des anisotropen Materialverhaltens. Dissertation, 1996 mehr…
  • Katzenschwanz,C.: Spannungen und Verschiebungen in reparierten Scheiben und Platten aus faserverstärktem Kunststoff. DGLR-Jahrbuch 1996, 1996DGLR Jahrestagung mehr…
  • Katzenschwanz,C.: Stresses and Displacements in Repaired Plates Made out of Composite Materials. Advances in Analysis and Design of Composites, Civil-Comp Press, 1996, S. 91-100 mehr…
  • Katzenschwanz,C.; Senger,W.: Anwendungsbeispiele der FEM mit ANSYS in der Berechnung von Faserverbundwerkstoffen. Berechnung von Faserverbundstrukturen unter Anwendung numerischer Verfahren, 1996München, Lehrstuhl für Leichtbau, (S. 10-1 - 10-9) mehr…
  • Knott,H.-P.; Kaiser,C.: Auslegung von Strukturen zur Integration von Experimenten in Flugzeugzellen (Vortrag Nr. I-6). Tagungsband 14. CAD-FEM USERS MEETING, 1996 mehr…
  • Merat, P.: Rechnergestützte Auftragsabwicklung an einem Praxisbeispiel. Dissertation, 1996 mehr…

1995

  • Huber, T.: Senken von Montagezeiten und -kosten im Getriebebau. Dissertation, 1995 mehr…
  • Steiner, J. M.: Rechnergestütztes Kostensenken im praktischen Einsatz. Dissertation, 1995 mehr…

1994

  • Schlüter, A.: Gestaltung von Schnappverbindungen für montagegerechte Produkte. Dissertation, 1994 mehr…
  • Stoll, G.: Montagegerechte Produkte mit feature-basiertem CAD. Dissertation, 1994 mehr…
  • Stolz, P.: Aufbau technischer Informationssysteme in Konstruktion und Entwicklung am Beispiel eines elektronischen Zeichnungsarchives. Dissertation, 1994 mehr…
  • Wellniak, R.: Das Produktmodell im rechnerintegrierten Konstruktionsarbeitsplatz. Dissertation, 1994 mehr…
  • Wolfram, M.: Feature-basiertes Konstruieren und Kalkulieren. Dissertation, 1994 mehr…

1993

  • Bruckner, J.: Kostengünstige Wärmebehandlung durch Entscheidungsunterstützung in Konstruktion und Härterei. Dissertation, 1993 mehr…
  • Lenk, E.: Zur Problematik der technischen Bewertung. Dissertation, 1993 mehr…
  • Schiebeler, R.: Kostengünstig Konstruieren mit einer rechnergestützten Konstruktionsberatung. Dissertation, 1993 mehr…
  • Stuffer, R.: Planung und Steuerung der Integrierten Produktentwicklung. Dissertation, 1993 mehr…
  • Wach, J. J.: Problemspezifische Hilfsmittel für die Integrierte Produktentwicklung. Dissertation, 1993 mehr…
  • Weinbrenner, V.: Produktlogik als Hilfsmittel zum Automatisieren von Varianten- und Anpassungskonstruktionen. Dissertation, 1993 mehr…

1992

  • Braunsperger, M.: Qualitätssicherung im Entwicklungsablauf – Konzept einer präventiven Qualitätssicherung für die Automobilindustrie. Dissertation, 1992 mehr…
  • Feichter, E.: Systematischer Entwicklungsprozess am Beispiel von elastischen Radialversatzkupplungen. Dissertation, 1992 mehr…

1991

  • Neese, J.: Methodik einer wissensbasierten Schadenanalyse am Beispiel Wälzlagerungen. Dissertation, 1991 mehr…
  • Schaal, S.: Integrierte Wissensverarbeitung mit CAD – Am Beispiel der konstruktionsbegleitenden Kalkulation. Dissertation, 1991 mehr…

1990

  • Dylla, Norbert: Denk- und Handlungsabläufe beim Konstruieren. Dissertation, 1990 mehr…
  • Hillebrand, A.: Ein Kosteninformationssystem für die Neukonstruktion mit der Möglichkeit zum Anschluss an ein CAD-System. Dissertation, 1990 mehr…
  • Müller, R: Datenbankgestützte Teileverwaltung und Wiederholteilsuche. Dissertation, 1990 mehr…

1989

  • Kittsteiner, H.-J.: Die Auswahl und Gestaltung von kostengünstigen Welle-Nabe-Verbindungen. Dissertation, 1989 mehr…

1988

  • Figel, K.: Optimieren beim Konstruieren. Dissertation, 1988 mehr…
  • Pickel, H.: Kostenmodelle als Hilfsmittel zum Kostengünstigen Konstruieren. Dissertation, 1988 mehr…
  • Tropschuh, P. F.: Rechnerunterstützung für das Projektieren mit Hilfe eines wissensbasierten Systems. Dissertation, 1988 mehr…

1987

  • Hafner, J.: Entscheidungshilfen für das kostengünstige Konstruieren von Schweiß- und Gussgehäusen. Dissertation, 1987 mehr…
  • John, T.: Systematische Entwicklung von homokinetischen Wellenkupplungen. Dissertation, 1987 mehr…

1986

  • Sauermann, Hans Joachim: Eine Produktionsplanung für Unternehmen des Maschinenbaus. Dissertation, 1986 mehr…

1985

  • Rutz, A.: Konstruieren als gedanklicher Prozess. Dissertation, 1985 mehr…

1984

  • Augustin, W.: Sicherheitstechnik und Konstruktionsmethodiken – Sicherheitsgerechtes Konstruieren. Dissertation, 1984 mehr…

1983

  • Fischer, D.: Kostenanalyse von Stirnzahnrädern. Erarbeitung und Vergleich von Hilfsmitteln zur Kostenfrüherkennung. Dissertation, 1983 mehr…

1982

  • Baumann, G.: Ein Kosteninformationssystem für die Gestaltungsphase im Betriebsmittelbau. Dissertation, 1982 mehr…

1981

  • Balken, J.: Systematische Entwicklung von Gleichlaufgelenken. Dissertation, 1981 mehr…
  • Petra, H.: Systematik, Erweiterung und Einschränkung von Lastausgleichslösungen für Standgetriebe mit zwei Leistungswegen – Ein Beitrag zum methodischen Konstruieren. Dissertation, 1981 mehr…

1980

  • Henkel, G.: Theoretische und experimentelle Untersuchungen ebener konzentrisch gewellter Kreisringmembranen. Dissertation, 1980 mehr…
  • Lindemann, Udo: Systemtechnische Betrachtung des Konstruktionsprozesses unter besonderer Berücksichtigung der Herstellkostenbeeinflussung beim Festlegen der Gestalt. Dissertation, 1980 mehr…
  • Njoya, G.: Untersuchungen zur Kinematik im Wälzlager bei synchron umlaufenden Innen- und Außenringen. Dissertation, 1980 mehr…

1979

  • Heisig, R.: Längencodierer mit Hilfsbewegung. Dissertation, 1979 mehr…
  • Kiewert, A.: Systematische Erarbeitung von Hilfsmitteln zum kostenarmen Konstruieren. Dissertation, 1979 mehr…

1978

  • Weber, J.: Extruder mit Feststoffpumpe – Ein Beitrag zum Methodischen Konstruieren. Dissertation, 1978 mehr…

1977

  • Schäfer, J.: Die Anwendung des methodischen Konstruierens auf verfahrenstechnische Aufgabenstellungen. Dissertation, 1977 mehr…

1976

  • Baumgarth, R.: Die Vereinfachung von Geräten zur Konstanthaltung physikalischer Größen. Dissertation, 1976 mehr…
  • Mauderer, E.: Beitrag zum konstruktionsmethodischen Vorgehen durchgeführt am Beispiel eines Hochleistungsschalter-Antriebs. Dissertation, 1976 mehr…

1974

  • Lubitzsch, W.: Die Entwicklung eines Maschinensystems zur Verarbeitung von chemischen Endlosfasern. Dissertation, 1974 mehr…
  • Scheitenberger, H.: Entwurf und Optimierung eines Getriebesystems für einen Rotationsquerschneider mit allgemeingültigen Methoden. Dissertation, 1974 mehr…

1972

  • Schmettow, D.: Entwicklung eines Rehabilitationsgerätes für Schwerstkörperbehinderte. Dissertation, 1972 mehr…

1971

  • Ott, J.: Untersuchungen und Vorrichtungen zum Offen-End-Spinnen. Dissertation, 1971 mehr…
  • Steinwachs, H.: Informationsgewinnung an bandförmigen Produkten für die Konstruktion der Produktmaschine. Dissertation, 1971 mehr…

1969

  • Collin, H.: Entwicklung eines Einwalzenkalanders nach einer systematischen Konstruktionsmethode. Dissertation, 1969 mehr…